Supermicro X7DCL-3 Handleiding

Supermicro Moederbord X7DCL-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DCL-3 (90 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/90

SUPER

X7DCL-3

USER’S MANUAL

Revision 1.0c

X7DCL-i

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL NOT

HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0c

Release Date: March 11, 2009

Preface

About This Manual

This man ual is wri tten for system in tegrat ors , PC techn icians and

knowledgeable PC users. It provides information for the installation and use of

the X7DCL-3/X7DCL-i motherboard. The X7DCL-3/X7DCL-i

supports dual Intel Xeon Quad Core/Dual Core 5400/5300/5200/5100 Series

processors (w/771 LGA) with a front side bus speed of up to 1.333 GHz. With

dual 64-bit Xeon Quad Core/Dual Core 5400/5300/5200/5100 Series processors

built-in, the X7DCL-3/X7DCL-i offers substantial functionality enhancements to

the motherboards based on the Intel Core microarchitecture while remaining

compatible with the IA-32 software. The features supported by this motherboard

include Intel Virtualization Technology, Enhanced Intel SpeedStep technology,

Extended Memory 64 Technology (EM64T) and Native DDR 2 DIMM modules.

These features allow the motherboard to operate at much higher speeds with

lower power consumption in much safer thermal environments than the traditional

motherboards. The X7DCL-3/X7DCL-i is ideal for complex business applications

and servers. Please refer to the motherboard specications pages on our web site

(http://www.supermicro.com/products/motherboard/) for updates. This product is

intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, specifications and performance of the

mainboard and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A Appendix B lists BIOS POST Error Codes. and Appendix C provide

the Windows OS and other Software Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation

and to prevent damage done to the components or injury to yourself.

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to ensure correct system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DCL-3
Breedte:	306 mm
Diepte:	254 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	5
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Processorfabrikant:	Intel
Maximum intern geheugen:	48 GB
Compatibele besturingssystemen:	32-bit & 64-bit.
ECC:	Ja
Chipset moederbord:	Intel® 5100
PS/2 poort(en):	2
Seriële poort(en):	2
PCI Express x8 slots:	2
PCI Express x4 slots:	1
Geheugen voltage:	1.8 V
Soorten RAID:	0, 1,10
Maximum geheugen grafische adapter:	32 MB
Wake-on-LAN:	Ja
PCI-slots:	3
Aantal eSATA-poorten:	8
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	ATX
Aantal geheugenslots:	6
Grootte BIOS-geheugen:	64 Mbit
ATX Power connector (24-pin):	Ja
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	5
Aansluiting voor diskettestation:	Ja
Chassis intrusion aansluiting:	Ja
Aantal Parallel ATA aansluitingen:	6
Grafische controller:	XGI Z9
Soort aansluiting controller:	SATAII
CF card connector:	Ja