Supermicro X6DA8-G Handleiding
Supermicro
Moederbord
X6DA8-G
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X6DA8-G (106 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/106
®
X6DA8-G
X6DAE-G
X6DA8-G2
X6DAE-G2
USER’S MANUAL
Revision 1.1b
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. SUPER MICRO COMPUTER assumes no responsibility for any inaccuracies that
may be contained in this document, makes no commitment to update or to keep current the
information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please
see our web site at www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated
or reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,
INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR
DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of
Santa Clara shall be the exclusive venue for the resolution of any such disputes.
Supermicro's total liability for all claims will not exceed the price paid for the hardware
product.
*California Best Management Practices Regulations for Perchlorate Materials
This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin
cells. "Perchlorate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/
perchlorate".
*FCC Statement: This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instruction manual, may cause interference with
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/television technician for help.
Revision Number: Rev. 1.1b
Release Date: June 5, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use
of the X6DA8-G/X6DAE-G/X6DA8-G2/X6DAE-G2 motherboard. The
X6DA8-G/X6DAE-G/X6DA8-G2/X6DAE-G2 supports single or dual
Intel® Xeon NoconaTM processors at a 800 MHz front side bus. Based
upon Intel's NetBurst microarchitecture with EM64T support, the Nocona
processor supports the IA-32 software and includes features found in the
XeonTM processor such as Hyper Pipelined Technology, which includes a
multi-stage pipeline, allowing the processor to operate at much higher core
frequencies. Packaged in a 604-pin Flip Chip Micro Pin Grid Array(FC-
mPGA4) platform in a Zero Insertion Force(ZIF) socket (mPGA 604), the
Nocona Processor (800 MHz) supports Hyper-Threading Technology and
is ideal for high performance workstation and server environments with up
to two processors on one system bus. Please refer to the motherboard
specifications pages on our web site (http://www.supermicro.com/products/
motherboard/) for updates on supported processors. This product is in-
tended to be professionally installed.
Manual Organization
Chapter 1 begins with a checklist of what should be included in your
mainboard box, describes the features, specifications and performance of
the motherboard and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices.
Read this chapter when you want to install the processor and DIMM memory
modules and when mounting the mainboard in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE
interfaces, the parallel and serial ports, the keyboard and mouse, the power
supply and various control panel buttons and indicators.
If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the setup configuration
stored in CMOS. For quick reference, a general FAQ [Frequently Asked
Questions] section is provided.
Chapter 4 includes an introduction to BIOS and provides detailed informa-
tion on running the CMOS Setup utility.
Appendix A gives information on BIOS POST messages.
Appendix B provides software and the OS installation instructions.
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X6DA8-G |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X6DA8-G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024