Supermicro X13SRN-E Handleiding
Supermicro
Moederbord
X13SRN-E
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X13SRN-E (116 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/116
USER’S MANUAL
Revision 1.0
X13SRN-H/-E
X13SRN-H/-E-WOHS
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîš¿cant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: June 06, 2023
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2023 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X13SRN-H/-E series motherboard.
About This Motherboard
The X13SRN series motherboard is a 3.5" Single Board Computer (4.01" x 5.75") powered
by the Intel® 13th Generation Core™ i7/i5 mobile processor that combines power e󰀩ciency,
performance, and exibility features to drive success for demanding AI, graphics, and rugged-
edge user cases.
This new generation o󰀨ers a performance hybrid architecture with up to 14 cores and enhanced
Intel Iris® Xe graphics for fast, power-e󰀩cient parallel AI processing and immersive visual
experiences. Intel DL Boost with VNNI instructions on the CPU and DP4a (int8) instructions
on the GPU accelerate AI inferencing workloads with the Intel Distribution of OpenVINO toolkit
makes the X13SRN series enable advanced intelligence and real-time performance in the
most challenging environments.
The X13SRN is equipped with the Intel Iris® Xᵉ with up to 96 graphics EUs with DirectX 12.1,
OpenGL 4.6, OpenCL 3.0, AV1 codec, and 8K encoding/decoding. The X13SRN supports
four independent displays with one HDMI 1.4b port, one HDMI 2.1b port, and two DisplayPort
1.4a from DP Alt Mode Type-C ports.
The X13SRN features the latest Intel security and reliability features, including Intel
Virtualization Technology (VT-x/-d), Intel Trusted Execution Technology, and Intel Control-
Flow Enforcement Technology. Additionally, the X13SRN series supports the Intel vProâ„¢
platform for business-class performance, hardware-enhanced security features, modern
remote manageability, and PC eet stability.
The X13SRN features a rich I/O interface including dual 2.5 G LAN ports, one M.2 M-Key PCIe
4.0 p3-x4 slot in the 2242/2280 form factor, one M.2 E-Key PCIe 3.0 x1/USB 2.0/Intel CNVi slot
in the 2230 form factor, one M.2 B-Key SATA 6 Gb/s or PCIe 3.0 x1/USB 3.0/USB 2.0 slot in
the 2242/2280 form factor with Nano SIM, one PCIe 4.0 p3-x4 SlimSAS port, four COM ports,
four USB 3.2 ports in Type-C and Type-A, and a speaker-out with a 3 W ampliîš¿er. X13SRN
also features an onboard TPM 2.0.
The X13SRN supports 12-24 V DC input power to meet varying embedded system
requirements, such as embedded networking and storage systems. Based on numerous
demands from embedded applications, Supermicro developed an optimized thermal solution
for X13SRN, producing a fanless design on a high performance platform.
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X13SRN-E |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X13SRN-E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024