Supermicro X13DET-B Handleiding
Supermicro
Moederbord
X13DET-B
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X13DET-B (160 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/160
USER'S MANUAL
Revision 1.0b
X13DET-B
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING, OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in an industrial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0b
Release Date: May 25, 2023
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2023 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X13DET-B motherboard, which is
intended to be used in a Supermicro proprietary server.
About This Motherboard
The Supermicro X13DET-B motherboard supports dual 4th Gen Intel® Xeon® Scalable
Processors (in Socket E LGA 4677) with four UPIs (16GT/s max.) and a TDP (Thermal
Design Power) up to 350W. Built with the Intel C741 chipset, the X13DET-B supports 4TB
(max) RDIMM DDR5 ECC memory with speeds up to 4800MT/s in 16 DIMM slots (Note 1
below). This motherboard features superior I/O expandability and exibility, including three
PCIe 5.0 x16 slots for riser cards, and storage devices, one PCIe 5.0 x8 slot (with two NVMe
M.2 devices supported), one PCIe 5.0 x8 SAS storage slot, îšżve PCIe 5.0 (x16/x8) slots with
support of 48 lanes for 12 NVMe connections, 12 SATA 3.0 ports via PCH, one NC-SI header,
one VGA port, one COM port, one USB connector (with two USB 3.0 ports supported),
and a dedicated BMC LAN on the rear I/O panel. It also o󰀨ers the most advanced data
protection with hardware RoT (Root of Trust) and TPM (Trusted Platform Module) support
(Note 2 below). The X13DET-B is optimized for Big Twin systems with High Performance
Computing (HPC) and Human-Computer Interface (HCI). It is ideal for Cloud Computing and
storage applications. Please note that all Supermicro products are intended to be installed
and serviced by professional technicians only. For processor/memory updates, please refer
to our website at http://www.supermicro.com/products/.
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For TPM support, an optional part is needed. Contact Supermicro Technical
Support for more information.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper system installation and
for protection against component damage or personal injury.
Warning! Indicates that you may encounter high voltage while performing a task.
Warning! Important information is given to prevent component damage or personal
injury.
Important: Important information is given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information is given to provide information for proper system setup.
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X13DET-B |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X13DET-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
16 November 2024
16 November 2024
15 November 2024
14 November 2024
13 November 2024
12 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024