Supermicro X12STN-C-WOHS Handleiding
Supermicro
Moederbord
X12STN-C-WOHS
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X12STN-C-WOHS (114 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/114
USER’S MANUAL
Revision 1.0a
X12STN-H/-E/-L/-C
X12STN-H/-E/-L/-C-WOHS
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of updates. Note:
For the most up-to-date version of this manual, refer to https://www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time without notice. This product, including software and documentation, is the property of Supermicro and/or
its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as
expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.https://www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0a
Release Date: April 11, 2022
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2022 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X12STN series motherboards.
About This Motherboard
The X12STN motherboard is a 3.5” Single Board Computer size 4.01" x 5.75" (102mm x
146mm) powered by the 11th generation of Intel® Core™ U series processor, which operates
on low power and features a TDP of 15~28W to provide high performance computing and
multimedia capabilities.
X12STN adopts the latest 64-bit, quad/dual-core processors built on 10nm process technology
for improvements in CPU processing, graphics, security and I/O exibility.
In addition, X12STN is equipped with the latest generation graphics core (Intel Iris® Xᵉ /
UHD for 11th Gen processor Graphics) with DirectX 12, OpenGL 4.5, OpenCL 2.2, and 4K
encoding/decoding, which increases the possibility for multimedia application development.
X12STN with Intel Core i7 and Core i5 supports Intel vPro™ Technology to support Intel
Active Management Technology (AMT), Intel Virtualization Technology (VT-x/-d) and Trusted
Execution Technology. It enhances business-class performance, hardware-enhanced security
features, modern remote manageability, and PC eet stability.
X12STN supports not only quadruple independent displays, including HDMI 1.4, 2.0, DP1.4a
(from Type-C), and 48-bit LVDS interfaces, but also low power dual channel 3200MHz
DDR4 Non-ECC SODIMM of up to 64GB and TPM 2.0, as well as trendy technology built in
with USB3.1 Gen2 type-C.
X12STN also supports a wide range of 12-24V (10% margin) DC input power supply in order
to meet various embedded requirement. Based on numerous demands from embedded
applications, Supermicro developed an optimized thermal solution for X12STN producing
a fanless design on a high performance platform. It is ideal for embedded networking and
storage systems. It features rich I/O interface inculding two 2.5Gigabit Ethernet, three M.2
M-Key/B-Key/E-Key connections, four COM ports (two RS232/422/485, two RS232), eight
USB ports (4 x USB3.1 Gen2, 4 x USB2.0), and an audio speaker output with 3W ampliîšżer
to help customer develop their embedded application easily.
Note that this motherboard is intended to be installed and serviced by professional technicians
only. For processor/memory updates, refer to https://www.supermicro.com/products/.
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X12STN-C-WOHS |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X12STN-C-WOHS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024