Supermicro X12SCQ Handleiding
Supermicro
Moederbord
X12SCQ
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X12SCQ (128 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/128
USER'S MANUAL
Revision 1.0c
X12SCQ
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0c
Release Date: January 31, 2023
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2023 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the motherboard.
About This Motherboard
The Supermicro X12SCQ supports the Intel® 10th Gen Core i/Pentium/Celeron series
processor up to 10 cores. Built with the Intel PCH Q470E chipset, the X12SCQ supports
128GB DDR4 Non-ECC UDIMM memory with speeds of up to 2933MHz, SATA 3.0 ports, an
M.2 slot, 1G Base-T ports, and a Trusted Platform Module (TPM) header. Please note that
this motherboard is intended to be installed and serviced by professional technicians only.
For processor/memory updates, please refer to our website at http://www.supermicro.com/
products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to di󰀨erentiate various models or to provide in-
formation for proper system setup.
6
DIMM Installation ..............................................................................................................30
DIMM Removal .................................................................................................................30
2.5 Rear I/O Ports ....................................................................................................................31
2.6 Front Control Panel ............................................................................................................37
2.7 Connectors .........................................................................................................................41
Power Connections ...........................................................................................................41
Headers .............................................................................................................................43
2.8 Jumper Settings .................................................................................................................52
How Jumpers Work ...........................................................................................................52
2.9 LED Indicators ....................................................................................................................56
Chapter 3 Troubleshooting
3.1 Troubleshooting Procedures ..............................................................................................58
Before Power On ..............................................................................................................58
No Power ..........................................................................................................................58
No Video ...........................................................................................................................59
System Boot Failure .......................................................................................................59
Memory Errors ..................................................................................................................59
Losing the System's Setup Conîšżguration .........................................................................60
When the System Becomes Unstable ..............................................................................60
3.2 Technical Support Procedures ...........................................................................................62
3.3 Frequently Asked Questions ..............................................................................................63
3.4 Battery Removal and Installation .......................................................................................64
Battery Removal ................................................................................................................64
Proper Battery Disposal ....................................................................................................64
Battery Installation .............................................................................................................64
3.5 Returning Merchandise for Service ....................................................................................65
Chapter 4 UEFI BIOS
4.1 Introduction .........................................................................................................................66
4.2 Main Setup .........................................................................................................................67
4.3 Advanced ............................................................................................................................69
4.4 Event Logs .......................................................................................................................103
4.5 Thermal & Fan ..................................................................................................................105
4.6 Security .............................................................................................................................107
Super X12SCQ User's Manual
7
4.7 Boot .................................................................................................................................. 111
4.8 Save & Exit .......................................................................................................................113
Appendix A BIOS Codes
A.1 BIOS Error POST (Beep) Codes .....................................................................................115
A.2 Additional BIOS POST Codes ..........................................................................................116
Appendix B Software
B.1 Microsoft Windows OS Installation ...................................................................................117
B.2 Driver Installation ..............................................................................................................119
Appendix C Standardized Warning Statements
Appendix D UEFI BIOS Recovery
D.1 Overview ...........................................................................................................................124
D.2 Recovering the UEFI BIOS Image ...................................................................................124
Preface
9
Chapter 1: Introduction
Figure 1-1. X12SCQ Motherboard Image
Note: All graphics shown in this manual were based upon the latest PCB revision
available at the time of publication of the manual. The motherboard you received may
or may not look exactly the same as the graphics shown in this manual.
16
Super X12SCQ User's Manual
Note 1: This is a general block diagram and may not exactly represent the features
on your motherboard. See the previous pages for the actual speciîšżcations of your
motherboard.
Note 2: PCIe expansion can be utilized as either p16-x16 SLOT7 with N/A SLOT5 or p16-x8
SLOT7 with p16-x8 SLOT5
Figure 1-3.
System Block Diagram
2666/2933(1PC)MT/s
IMVP8
INTEL LGA1200
PCIe p16-x16 SLOT #7
PCIe3.0_x16
8.0GT/s
SVID
DDR4 (CHA)
DIMMA2 (Blue)
DIMMA1 (Bl )ack
DDR4 (CHB)
DIMMB2 (Blue)
DIMMB1 (Bl )ack
8GT/s
x4 DMI 3
PCIe 3.0 p16-x4 SLOT #6
PCI . x4e3 0_
8GT/s
SATA-III
4+8 USB 2.0 PORTS
6Gb/s
480Mb/s
USB2.0
6 SATA- PORTSIII
RJ45
2.5GT/s I M219L
Intel
PCH-H Q470E
(So et-H5)ck
Processor
AZ IAAL
Realtek ALC888S-VD2
RJ45
2.5GT/s I -AT210
FLASH
SPI 32MB
SPI
DP++
D .2P1
DVI-D DDI1/Port B
DDI2/ Port C
DDI3 Port D
TPM2.0 Header
LPC
HEALTH
INFO
P/S2 KB/MS
NCT6776D
LPC I/O
PCIe 3.0 p16-x4 SLOT #4 PCI . x4e3 0_
8GT/s
DP to VGA c verteron eDP
8-bit GPIO Header
PVCC_CPU/GT
VRM
NCT5104D
COM1/2
Audio
SMBus
PCA9554APW
4 for REAR: TYPE-A + TYPE-C
2 for FRONT: HEADER
4 for REAR USB3.2 CONN
2 for REAR PS/2 CONN
2 for FRONT USB3.2 HEADER
4 for USB2.0 BOX HEADER
COM3/4
M.2 M KEY SSD PCI . x4e3 0_
8GT/s
6 USB 3.2 PORTS
10 Gb/s
USB3.2 (10Gb)
MX25L25673GM2I-10G
TPM2.0 On-Board
VGA 2666/2933(1PC)MT/s
PCIe p16-x8 SLOT #5 PCIe Switch
HDMI2.0 LSPCON
PCIe1.0_x1 GLAN1
PCIe1.0_x1 GLAN2
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X12SCQ |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X12SCQ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
18 December 2024
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
27 Maart 2025
27 Maart 2025
24 Maart 2025
10 Maart 2025
4 Maart 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025