Supermicro X10SLV-Q Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X10SLV-Q (103 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/103
X10SLV
X10SLV-Q
USER’S MANUAL
Revision 1.0b
Manual Revision 1.0b
Release Date: March 23, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.
Copyright © 2017 by Super Micro Computer, Inc. All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, you are encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this product
may expose you to lead, a chemical known to the State of California
to cause birth defects and other reproductive harm.
iii
Preface
About This Manual
This manual is written fo r system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X10SLV/-Q motherboard. This product is intended to be professionally
installed and serviced by a technician.
About This Motherboard
The X10SLV/-Q motherboard is a value-driven product aimed at users who de-
mand a small form-factor, LGA-1150 based PC, for gateway server or embedded
applications.
The X10SLV/-Q Motherboard features a 4th generation Intel
® Core™ i7/i5/i3,
Pentium ®
or Celeron® processor and offering many features such as support for
up to 16GB of memory on two vertical SODIMM sockets, two SATA 3.0 ports, two
SATA 2.0 ports, ve high-speed serial ports, an on-board VESDisplayPort and
a miniPCIe port. The X10SLV/-Q also supports up to two independent displays
(three on the X10SLV/-Q). These enable the X10SLV/-Q Motherboard to deliver an
intermediate performance platform, in a small form-factor.
Manual Organization
Chapter 1 describes the features, specications and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Driver Installation Instructions.
Appendix C provides the UEFI BIOS Recovery Instructions.
Preface


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: X10SLV-Q
Breedte: 170 mm
Diepte: 170 mm
Ethernet LAN: Ja
Type stroombron: ATX
Aantal USB 2.0-poorten: 2
Aantal HDMI-poorten: 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Intern geheugen: 16 GB
Aantal DisplayPorts: 1
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: 5
Processor socket: LGA 1150 (Socket H3)
Processorfabrikant: Intel
Audio-uitgangskanalen: - kanalen
Ethernet interface type: Gigabit Ethernet
DVI-I poorten: 1
Chipset moederbord: Intel® Q87
Geheugen slots type: SO-DIMM
Audiochip: Realtek ALC888S
PCI Express x16 (Gen 3.x) slots: 1
Ondersteunde opslagstationinterfaces: SATA III
Geheugen voltage: 1.5 V
LAN controller: Intel® I210-AT
Mini PCI Express slots: 1
Soorten RAID: 0, 1,5, 10
Aantal SATA III connectors: 4
Non-ECC: Ja
Wake-on-LAN: Ja
Compatibele processors: Intel Celeron, Intel Pentium
Ondersteunde geheugen types: DDR3-SDRAM
Wifi: Nee
Code geharmoniseerd systeem (HS): 84733020
Moederbord chipset familie: Intel
Moederbord form factor: mini ITX
Supported memory clock speeds: 1600 MHz
BIOS type: AMI
Grootte BIOS-geheugen: 16 Mbit
ACPI version: 5.0
COM aansluitingen: 5
TPM connector: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro X10SLV-Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden