Supermicro X10SLM+-F Handleiding

Supermicro Moederbord X10SLM+-F

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X10SLM+-F (115 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/115

X10SLM+-F

X10SLM+-LN4F

X10SLL+-F

USER’S MANUAL

Revision 1.1a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

• Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision: 1.1a

Release Date: May 24, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manua l is writte n for sy st em integ rat ors , IT tech ni ci an s and

knowledgeable end users. It provides information for the installation and use of the

X10SLM+/X10SLL+ Motherboard.

About This Motherboard

The X10SLM+/X10SLL+ Motherboard Series supports a single 4th Gen-

eration Intel® E3-1200 V3 Series processor in an LGA 1150 (H3) socket. With the

Intel® C220/C222/C224 Express chipset built in, the X10SLM+/X10SLL+ Moth-

erboard Series supports Intel® Rapid Storage Technology, offering great system

enhancement to Denlow Server platforms. Please refer to our website (http://www.

supermicro.com/products/) for processor and memory support updates. This product

is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information on the Intel® C220/C222/C224 Express

chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Appendix D provides Dual BIOS Boot Block information for BIOS crisis recovery.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X10SLM+-F
Breedte:	244 mm
Diepte:	244 mm
Gebruiksaanwijzing:	Ja
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Meegeleverde software:	- IPMI v2.0\r\n- SuperDoctor III\r\n- Watch Dog\r\n- NMI
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 1150 (Socket H3)
Processorfabrikant:	Intel
Maximum intern geheugen:	32 GB
On-board graphics adapter model:	Aspeed AST2400
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® C224
PCI Express x16 (Gen 3.x) slots:	1
Ondersteunde opslagstationinterfaces:	SATA II, SATA III
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel I210-AT, Realtek RTL8211E
Soorten RAID:	0, 1,5, 10
PCI Express x8 (Gen 3.x) slots:	1
Aantal SATA III connectors:	4
Aantal ondersteunde processoren:	1
Intel® Xeon series:	E3-1200
Maximum UDIMM geheugen:	32 GB
Aantal DIMM sloten:	4
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Wifi:	Nee
PCI Express x8 (Gen 2.x) slots:	1
Moederbord form factor:	micro ATX
Supported memory clock speeds:	1600 MHz
BIOS type:	AMI
ACPI version:	5.0
COM aansluitingen:	1
USB 2.0 aansluitingen:	4
Aantal COM-poorten:	1
TPM connector:	Ja
Aantal SATA II connectors:	2
IPMI LAN (RJ-45) port:	Ja
Ondersteunende UDIMM module capaciteit:	1GB, 2GB, 4GB, 8GB