Supermicro X10SBA-L Handleiding

Supermicro Moederbord X10SBA-L

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X10SBA-L (99 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/99

X10SBA

X10SBA-L

X10SBA-V

USER’S MANUAL

Revision 1.0c

The information in this user’s manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

• Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0c

Release Date: December 4, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

Th i s manual is written for s ystem integra tors, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X10SBA/-L/-V motherboard.

About This Motherboard

The X10SBA/-L/-V supports the next-generation Intel

® Celeron J1900

SoC (System on a Chip) 22nm Quad-Core processor in the BGA 1170 format.

With a 64-bit, 22nm, low-power Tri-gate Quad Core Silvermont processor built into

it, the X10SBA(-L) motherboard offers unprecedented enhancements in system

performance, power efciency, and visual/media capability. This motherboard is

ideal for SMB entry-level Storage, Server, or Appliance platforms that are optimized

for networking, thin-client, Kiosk, Digital Signage, and control-box applications.

Please refer to our website (http://www.supermicro.com/products/) for processor

and memory support updates. This product is intended to be installed and serviced

by professional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information on the Intel Celeron Bay Trail processor

platform.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Appendix D contains Dual Boot Block instructions.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X10SBA-L
Breedte:	170 mm
Diepte:	170 mm
Frequentie van processor:	2.42 GHz
Processormodel:	J1900
Grafische adapter:	HD Graphics
Ethernet LAN:	Ja
Type stroombron:	ATX
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Aantal DisplayPorts:	1
Temperatuur bij opslag:	0 - 60 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Processor socket:	BGA 1170
Processorfabrikant:	Intel
Maximum intern geheugen:	8 GB
Luchtvochtigheid bij opslag:	10 - 95 procent
Audio-uitgangskanalen:	- kanalen
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Geheugen slots type:	SO-DIMM
Grafische adapter-familie:	Intel
Aantal displays ondersteund:	2
Ondersteunde opslagstationinterfaces:	SATA II
Geheugen voltage:	1.35 V
LAN controller:	Intel® I210-AT
Non-ECC:	Ja
Compatibele processors:	Intel® Celeron®
Ondersteunde geheugen types:	DDR4-SDRAM
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Trusted Platform Module (TPM) version:	1.2
Moederbord chipset familie:	Intel
Moederbord form factor:	mini ITX
Aantal geheugenslots:	2
Supported memory clock speeds:	1066,1333,1600 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	5.0
COM aansluitingen:	4
USB 2.0 aansluitingen:	2
PC gezondheids monitor:	FAN, LED, Temperature
TPM connector:	Ja
Processor thermaal vermogen (max):	8 W
Aantal SATA II connectors:	2
Ondersteunde geheugenmodule capaciteiten:	2GB, 4GB