Supermicro X10DRFR-NT Handleiding
Supermicro
Moederbord
X10DRFR-NT
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro X10DRFR-NT (111 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/111
USER’S MANUAL
Revision 1.1
X10DRFR
X10DRFR-N
X10DRFR-NT
Manual Revision 1.1
Release Date: April 5, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manual is written for system integrators, IT professionals, and
knowledgeable end-users. It provides information for the installation and use of the
X10DRFR/X10DRFR-N//X10DRFR-NT motherboard.
About This Motherboard
The Super X10DRFR/X10DRFR-N/X10DRFR-NT motherboard supports dual Intel
®
E5-2600 (v3/v4) processors (Socket R3) that offer new Intel Microarchitecture 22nm
(E5-2600v3)/14nm (E5-2600v4) Process Technology, delivering the best balanced
solution of performance, power efî‚żciency, and features to meet demands of high-end
server platforms. With the PCH C612 built in, the X10DRFR(-N/-NT) motherboard
supports Intel® Manageability Engine, Intel Rapid Storage Technology enterprise,
Digital Media Interface, PCI-E Gen. 3.0, and 2400 MHz (max) DDR4 memory. This
motherboard is ideal for 4U FatTwin server platforms. Please refer to our website
(http://www.supermicro.com) for processor and memory support updates.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the moth-
erboard. It also provides detailed information about the Intel PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the BIOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Preface
iii
Preface
v
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: marketing@supermicro.com (General Information)
support@supermicro.com (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: sales@supermicro.nl (General Information)
support@supermicro.nl (Technical Support)
rma@supermicro.nl (Customer Support)
Website: www.supermicro.nl
Asia-Paciî‚żc
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Email: support@supermicro.com.tw
Website: www.supermicro.com.tw
vi
Table of Contents
Preface
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Processor and Chipset Overview .................................................................1-11
1-3 Special Features ........................................................................................... 1-12
1-4 System Health Monitoring ............................................................................. 1-12
1-5 ACPI Features ............................................................................................... 1-13
1-6 Power Supply ................................................................................................ 1-13
1-7 Advanced Power Management ..................................................................... 1-14
Intel® Intelligent Power Node Manager (NM) (Available when the Supermicro
Power Manager [SPM] is installed)............................................................... 1-14
Management Engine (ME) ............................................................................ 1-14
Chapter 2 Installation
2-1 Standardized Warning Statements ................................................................. 2-1
2-2 Static-Sensitive Devices .................................................................................. 2-4
2-3 Motherboard Installation .................................................................................. 2-5
2-4 Processor and Heatsink Installation................................................................ 2-7
Installing the LGA2011 Processor ................................................................. 2-7
Installing a Passive Heatsink .........................................................................2-11
Removing the Passive Heatsink ................................................................... 2-12
2-5 Installing and Removing the Memory Modules ............................................. 2-13
Installing & Removing DIMMs ....................................................................... 2-13
Removing Memory Modules ......................................................................... 2-13
2-6 Control Panel Connectors and I/O Ports ...................................................... 2-16
Back Panel Connectors and I/O Ports .......................................................... 2-16
Back Panel I/O Port Locations and Deî‚żnitions ........................................... 2-16
Universal Serial Bus (USB) ...................................................................... 2-17
Video Connector ....................................................................................... 2-17
Ethernet Ports .......................................................................................... 2-18
2-7 Connecting Cables ........................................................................................ 2-19
Power Connectors ................................................................................... 2-19
COM Port Header .................................................................................... 2-20
IPMB I2C SMB .......................................................................................... 2-20
Fan Headers ............................................................................................. 2-21
TPM Header/Port 80 ................................................................................ 2-22
Non-Mask Interrupt Header ...................................................................... 2-22
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
vii
Table of Contents
T-SGPIO 1/2 Headers .............................................................................. 2-23
NVM Express Connections (For X10DRFR-N/NT Only) .......................... 2-23
2-8 Jumper Settings ............................................................................................ 2-24
Explanation of Jumpers ................................................................................ 2-24
LAN Ports 1/2 Enable .............................................................................. 2-24
CMOS Clear ............................................................................................. 2-25
Watch Dog Enable/Disable ...................................................................... 2-25
VGA Enable .............................................................................................. 2-26
BMC Enable ............................................................................................ 2-26
I2C Bus to PCI-Exp. Slots ........................................................................ 2-27
Manufacturer Mode Select ....................................................................... 2-27
2-9 Onboard LED Indicators ............................................................................... 2-28
LAN LEDs ................................................................................................. 2-28
IPMI_LAN LEDs ....................................................................................... 2-28
Standby_Power Good LED ...................................................................... 2-29
BMC Heartbeat LED ................................................................................ 2-29
System_Power Good LED ....................................................................... 2-30
SATA Activity LED .................................................................................... 2-30
2-10 PCI-Express and Serial ATA Connections .................................................... 2-31
PCI-Express 3.0 x16 Slot ......................................................................... 2-31
PCI-Express 3.0 x8 Slots ......................................................................... 2-31
Serial ATA Ports........................................................................................ 2-32
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures ........................................................................... 3-1
3-2 Technical Support Procedures ........................................................................ 3-5
3-3 Battery Removal and Installation .................................................................... 3-6
Battery Removal .............................................................................................. 3-6
3-4 Frequently Asked Questions ........................................................................... 3-7
3-5 Returning Merchandise for Service................................................................. 3-8
Chapter 4 BIOS
4-1 Introduction ...................................................................................................... 4-1
4-2 Main Setup ...................................................................................................... 4-2
4-3 Advanced Setup Conî‚żgurations...................................................................... 4-4
4-4 Event Logs ....................................................................................................4-32
4-5 IPMI ............................................................................................................... 4-34
4-6 Security Settings ........................................................................................... 4-36
4-7 Boot Settings ................................................................................................. 4-37
4-8 Save & Exit ................................................................................................... 4-39
viii
Appendix A BIOS Error Beep Codes
A-1 BIOS Error Beep Codes .................................................................................A-1
Appendix B Software Installation Instructions
B-1 Installing Software Programs ..........................................................................B-1
B-2 Conî‚żguring SuperDoctor 5 .............................................................................B-2
Appendix C UEFI BIOS Recovery Instructions
C-1 An Overview to the UEFI BIOS ......................................................................C-1
C-2 How to Recover the UEFI BIOS Image (-the Main BIOS Block)....................C-1
C-3 To Recover the Main BIOS Block Using a USB-Attached Device..................C-1
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
The X10DRFR(-N/-NT) motherboard was designed to be used with a Supermicro-
proprietary chassis as an integrated server platform. It is not to be used as a stand-
alone product and will not be shipped independently in a retail box. No motherboard
shipping package will be provided in your shipment.
Note 1: For your system to work properly, please follow the links below
to download all necessary drivers/utilities and the user's manual for your
motherboard.
• Supermicro product manuals: http://www.supermicro.com/support/manu-
als/
• Product Drivers and utilities: ftp://ftp.supermicro.com/
Note 2: For safety considerations, please refer to the complete list of safety
warnings posted on the Supermicro website at http://www.supermicro.com/
about/policies/safety_information.cfm.
If you have any questions, please contact our support team at support@supermicro.
com.
1-2
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
Note: All graphics shown in this manual were based upon the latest PCB
Revision available at the time of publishing of the manual. The motherboard
you've received may or may not look exactly the same as the graphics
shown in this manual.
Motherboard Image
Chapter 1: Overview
1-3
Notes:
1. For the latest CPU/Memory updates, please refer to our website at http://
www.supermicro.com/products/motherboard/ for details.
2. Use only the correct type of onboard CMOS battery as speciî‚żed by
the manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
Motherboard Layout
X10DRFR
BAR CODE
JI2C1
JWD1
JPB1
JPL1
JITP1
JPP0
JPP1
JTPM1
JSD1
JSD2
FAN3
FAN1
FAN2
JIPMB1
JBT1
JF1
T-SGPIO1
T-SGPIO2
JNMI1
LE1
LE2
LEDM1
LE3
JPWR10
JPWR9
JBAT1
CPU1
CPU2
I-S A0AT
I-SATA1
I-S A3AT
I-SATA4
S-SATA3
S-S 2ATA
GND
12V_IN
IPMI_LAN
LAN2 LAN1
COM1
USB1(3.0)
USB0(3.0)
CPU1 SXB1 PCI-E 3.0 X16
CPU1 MLP PCI-E 3.0 X8 CPU1 SXB2 PCI-E 3.0 X8
P2-DIMME1
P2-DIMME2
P2-DIMMF1
P2-DIMMF2
P2-DIMMH2
P2-DIMMH1
P2-DIMMG1
P2-DIMMG1
P1-DIMMA1
P1-DIMMA2
P1-DIMMB1
P1-DIMMB2
P1-DIMMD2
P1-DIMMD1
P1-DIMMC2
P1-DIMMC1
POWER BUTTON
JPG1
I-SATA5
BIOS
VGA
S-SATA1S-SATA0
Rev. 1.10
1
1
CLOSE 1st
OPEN 1st
PCH
LAN
CTRL
BMC
I-SATA2
1
FAN4
JPME2
JI2C2
JHP_I2C1
JVRM2
Battery
JMLP_STBY1
JMLP_STBY2
HDDPOWER1
HDDPOWER3
JNVME2
JNVME1
LE4
HDDPOWER2
JVRM1
JNVI2C1
1-4
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
Notes:
• See Chapter 2 for detailed information jumpers, I/O ports, connectors and ex-
pansion slots. " " indicates the location of "Pin 1".
• Components/Jumpers/LED Indicators that are not documented in this manual
are reserved for internal testing only.
X10DRFR
BAR CODE
JI2C1
JWD1
JPB1
JPL1
JITP1
JPP0
JPP1
JTPM1
JSD1
JSD2
FAN3
FAN1
FAN2
JIPMB1
JBT1
JF1
T-SGPIO1
T-SGPIO2
JNMI1
LE1
LE2
LEDM1
LE3
JPWR10
JPWR9
JBAT1
CPU1
CPU2
I-S A0AT
I-SATA1
I-S A3AT
I-SATA4
S-SATA3
S-S 2ATA
GND
12V_IN
IPMI_LAN
LAN2 LAN1
COM1
USB1(3.0)
USB0(3.0)
CPU1 SXB1 PCI-E 3.0 X16
CPU1 MLP PCI-E 3.0 X8
CPU1 SXB2 PCI-E 3.0 X8
P2-DIMME1
P2-DIMME2
P2-DIMMF1
P2-DIMMF2
P2-DIMMH2
P2-DIMMH1
P2-DIMMG1
P2-DIMMG1
P1-DIMMA1
P1-DIMMA2
P1-DIMMB1
P1-DIMMB2
P1-DIMMD2
P1-DIMMD1
P1-DIMMC2
P1-DIMMC1
POWER BUTTON
JPG1
I-SATA5
BIOS
VGA
S-SATA1S-SATA0
Rev. 1.10
1
1
CLOSE 1st
OPEN 1st
PCH
LAN
CTRL
BMC
I-SATA2
1
FAN4
JPME2
JI2C2
JHP_I2C1
JVRM2
Battery
JMLP_STBY1
JMLP_STBY2
HDDPOWER1
HDDPOWER3
JNVME2
JNVME1
LE4
HDDPOWER2
JVRM1
JNVI2C1
Motherboard Quick Reference
Chapter 1: Overview
1-5
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard Jumpers
Jumper Description Default Setting
JBT1 Clear CMOS/Reset BIOS Con-
î‚żguration
See Chapter 2
JI2C1/JI2C2 SMB to PCI-E Slots Pins 2-3 (Normal)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 (For X10DRFR(-
N)
GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPL1 (For X10DRFR-
NT)
10G-LAN1/10G-LAN2 Enable Pins 1-2 (Enabled)
JPME2 Manufacture Mode (ME) Select Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard Connectors
Connectors Description
Battery Onboard CMOS battery (JBAT1) (See the Note on P. 1-3.)
COM1 Serial Port/COM Port 1
CPU1 MLP_PCI-E
3.0x8
Micro Low_Proî‚żle (MLP) PCI-E 3.0 x8 slot supported by
CPU1
CPU1_SXB_PCI-E
3.0x16
SXB1_PCI-E 3.0 x16 slot supported by CPU1
FAN1-FAN4 CPU/System Cooling Fan headers 1-4
HDDPOWER 1/2/3 HDD Power headers 1/2/3 (JPWR_HDD1/2/3)
JF1 SMCI-Proprietary multiple connections head w/PMBus,
Hotswap I2C, LED signals, button signals, 5V standby
power supported
JIPMB1 4-pin External BMC I2C header (for an IPMI card)
JNMI1 Non-Mask Interrupt header
JPTM1 TPM (Trusted Platform Module)/Port 80
JPWR9/JPWR10 8-pin Power Connector 9 (12V_in)/Power Connector 10
(Ground)
JNVME1/2 NVM Express PCI-E 3.0 p13-x4 ports 1/2 (for X10DRFR-N/NT
only)
JNVI2C1 System Management Bus (SMB) for NVM Express port (for
X10DRFR-N/NT only)
LAN1/2 Gigabit (GLAN) Ethernet ports 1/2 (for X10DRFR(-N),
10G-LAN (TLAN) Ethernet ports 1/2 (for X10DRFR-NT)
(IPMI) LAN IPMI_dedicated LAN port
Power-Button Onboard power button
Chapter 1: Overview
1-7
CPU • Dual Intel® E5-2600 (v3/v4) processors (Socket R3
LGA 2011); each processor supports two full-width
Intel QuickPath Interconnect (QPI) links (with Data
Transfer Rate of up to 9.6 GT/s per QPI)
Notes: 1. E5-2600v4 requires Revision 2.0
BIOS (or higher). 2. E5-2600v3 is fully back-
compatible with all BIOS revisions.
Memory • Integrated memory controller supports up to 1024
GB of Load Reduced (LRDIMM), and up to 512
GB of Registered (RDIMM) DDR4 (288-pin) ECC
2400/2133/1866/1600 MHz memory in 16 slots
Note: Memory speed support is pending on
the processors installed in the system. For
the latest CPU/memory updates, please refer
to our website at http://www.supermicro.com/
products/motherboard.
DIMM Sizes
64GB @ 1.20V
Chipset • Intel® PCH C612
Expansion • One (1) Micro Low-Prole (MLP) PCI-Exp 3.0 x8 slot
supported CPU1
• One (1) SXB1 PCI-Exp 3.0 x16 slot supported CPU1
• Two (2) NVMe Ports 1/2 (dual PCI-E 3.0 x 4 mini-
SAS HD connectors) (X10DRFR-N/-NT)
Slots
Graphics • ASpeed AST2400 BMC Controller
Network • One Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet
Dual-Channel Controller for GLAN 1/GLAN 2 ports
(for X10DRFR/X10DRFR-N)
• One Intel X540 10-Gigabit Ethernet Dual-Channel
Controller for 10G-LAN (TLAN) 1/10G-LAN (TLAN)
2 ports (X10DRFR-NT)
• One IPMI-dedicated LAN supported by the AST2400
BMC
Motherboard Features
1-8
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
IPMI 2.0
• IPMI 2.0 supported by the ASpeed 2400 BMC
Serial (COM) Port
• One (1) Fast UART 16550 Connection: 9-pin RS-
232 port
VGA
• Rear VGA Port
Peripheral
Devices
USB Devices
• Two (2) USB 3.0 ports on the rear I/O panel (USB0/
USB1)
BIOS • 16 MB AMI SPI BIOS Flash ROM
• DMI/DMI2 2.3, PCI 2.3, ACPI 2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP), UEFI 2.3.1, and SMBIOS
2.7 or later
Power • ACPI Power Management
Cong. • Main switch override mechanism
• Power-on mode for AC power recovery
• Intel® Intelligent Power Node Manager (available
when the Supermicro Power Manager [SPM] is
installed)
• Management Engine
• Riser Card auto-detection
System
Health
System Health Monitoring
Monitoring • Onboard system health monitors for 1.2V, +3.3V,
3.3V Standby, +5V, +5V Standby, +12, chipset
(PCH) voltage, memory voltage, BMC voltage, and
battery voltage.
I/O Devices SATA Connections
• SATA 3.0 Six (6) SATA 3.0 Connections sup-
ported by Intel PCH (I-SATA0-5),
Four (4) SATA 3.0 Connections sup-
ported by Intel SCU (S-SATA0-3),
(S-SATA2/3: used with Supermicro's
SuperDOMs (Device-on-Module)
with power supply supported
• RAID RAID 0, 1, 5, 10 (from Intel PCH)
Chapter 1: Overview
1-9
• CPU 6-Phase switching voltage regulator
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support
Fan Control
• Fan status monitoring with rmware 4-pin fan speed
control
• Low noise fan speed control
LED Indicators
• System/CPU Overheat LED
• Suspend-state LED
System
Management
• PECI (Platform Environment Conguration Interface)
2.0 support
• System resource alert via SuperDoctor® 5
• Thermal Monitor 2 (TM2) support
• SuperDoctor® 5, Watch Dog, NMI
• Chassis Intrusion Header and Detection
Dimensions • 19.63" (L) x 8.53" (W) x (498.60 mm x 216.67 mm)
Note: For IPMI Conî‚żguration Instructions, please refer to the Embedded
IPMI Conî‚żguration User's Guide available @ http://www.supermicro.com/
support/manuals/.
1-10
X10DRFR/X10DRFR-N/X10DRFR-NT Motherboard User’s Manual
System Block Diagram
Notes: 1. This is a general block diagram and may not exactly represent
the features on your motherboard. See the Motherboard Features pages
for the actual speciî‚żcations of each motherboard. 2. This block diagram
is provided for your reference only.
SPI
L 3 AN
RGRMII
Debug Card
FRONT PANEL
SYSTEM POWER
CTRL
FAN SPEED
PCI-E X1 G2
USB 2.0
#12 USB2.0
#6/7/8
PCH
6.0 Gb/S
USB 2.0
LPC
MICROLP
USB2.0
1
SATA
5
4
R E-VB-CGTL8211
3
2
R 5J4
BIOS
SPI
SPI
T p Sensorem
W83773G
TPM HE ERAD
USB 3.0
USB
BIOS
HE ERAD
SPI
AST 0240
BMC
#3
#2
#5
RMII/NCSI
COM1
H derea
VGA CONN
BMC B t Fl hoo as
DDR3
SLOT SBX1
1600-2400
DDR4
P1
P1
P0
P0 #2-1
DDR4
#1-4
#1-3
#1-2
#1-1
QPI
9.6G
MICROLP SLOT
PCI-E X16 G3
DMI2
PCI-E X16
PCI-E X8 G3
#1-5
#1-6
DMI2
Processor
DDR4
Processor
DDR4
QPI
9.6G
4GB/s
PCI-E X8
P3
AB
I /350
X 054
LAN
PCI-E X8
P2 P3
CD
P1
AB
#1-7
#1-8
#2-2
#2-3
#2-4
#2-5
#2-6
#2-7
#2-8
6
78
9
10
#1 #2 #3 DMI2
PCI-E X8 G3
PCI-E X8 + X8
SXB2 SAS Slot
x8 Connection for future devices
(potentially: NVME 3,4)
PCI-E p18-x4 +x4 G3
NVME 1,2
PCI-E p18-x8 G3
PVCCIO
(1.05/0.95)
from 3.3v
1600-2400
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X10DRFR-NT |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X10DRFR-NT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
18 December 2024
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
27 Maart 2025
27 Maart 2025
24 Maart 2025
10 Maart 2025
4 Maart 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025
12 Februari 2025