Supermicro S2DG2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro S2DG2 (94 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/94
®
SUPER S2DG2
SUPER S2DGU
SUPER S2DGE
SUPER S2DGR
USER’S AND BIOS
MANUAL
Revision 1.4
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be contained
in this document, makes no commitment to update or to keep current the information in this
manual, or to notify any person or organization of the updates.
Please Note: For the
most up-to-date version of this manual, please see our web site at
www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF THE REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE OR DATA.
Unless you request and receive written permission from SUPERMICRO COMPUTER, you may
not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 1999 by SUPERMICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America.
Preface
About This Manual
This manual is written for system houses, PC technicians and
knowledgeable PC end users. It provides information for the installation and
use of the SUPER S2DG2/S2DGU/S2DGE/S2DGR motherboard. The SUPER
S2DG2/S2DGU/S2DGE/S2DGR supports Pentium II and III Xeon processors.
The Pentium II/III Xeon processor with the Dual Independent Bus Architecture
is based on the "Slot 2" infrastructure, which will provide the headroom for
future high-performance processors.
Manual Organization
Chapter 1, Introduction, describes the features, specifications and perfor-
mance of the SUPER S2DG2/S2DGU/S2DGE/S2DGR system board and pro-
vides detailed information about the chipset.
Refer to Chapter 2, Installation, for instructions on how to install the Pentium
II/III Xeon processor, the retention mechanism and the heat sink support.
This chapter also provides you with instructions for handling static-sensitive
devices. Read this chapter when you want to install DIMM modules and to
mount the system board in the chassis. Also refer to this chapter to connect
the floppy and hard disk drives, IDE interfaces, parallel port and serial ports
as well as the cables for the power supply, reset cable, Keylock/Power LED,
speaker and keyboard.
If you encounter any problems, see Chapter 3, Troubleshooting, which de-
scribes troubleshooting procedures for the video, the memory and the setup
configuration stored in memory. For quick reference, a general FAQ [Fre-
quently Asked Questions] section is provided. Instructions are also included
for technical support procedures, returning merchandise for service and for
BIOS upgrades using our BBS#.
See Chapter 4 for configuration data and BIOS features.
iii
Preface


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: S2DG2

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro S2DG2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden