Supermicro MBD-X9SCA-F-O Handleiding

Supermicro Moederbord MBD-X9SCA-F-O

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X9SCA-F-O (105 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/105

USER’S MANUAL

Revision 1.0

X9SCi-LN4

X9SCi-LN4F

X9SCA

X9SCA-F

Manual Revision 1.0

Release Date: February 23, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

This manu al is writ ten f o r sy ste m inte grat o rs, P C tec hnic ian s an d

knowledgeable PC users. It provides information for the installation and use of the

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F motherboard.

About This Motherboard

The X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F supports a single Intel®

Xeon E3-1200 series, 2nd generation Intel Core® i3, Pentium®, Celeron® proces-

sor in an LGA 1155 socket. With the Intel® C204 chipset built in, the X9SCi-LN4/

X9SCA series motherboard offers substantial enhancement in system performance

and storage capability for next_generation high_end server platforms* in a sleek

package. Please refer to our website (http://www.supermicro.com/products/) for

processor and memory support updates. This product is intended to be installed

and serviced by professional technicians.

*The X9SCi-LN4 series motherboard supports 1U server platforms, and the X9SCA

supports 3U/4U platforms.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information on the Intel C204 chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X9SCA-F-O
Breedte:	305 mm
Diepte:	244 mm
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	3
Certificering:	RoHS
Meegeleverde software:	IPMI v1.5 / 2.0, KVM\nSuper Doctor III\nWatch Dog\nNMI
Temperatuur bij opslag:	-40 - 70 °C
PCI Express slots versie:	2.0
Ingebouwde grafische adapter:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® C204
PCI Express x16 slots:	1
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x4 slots:	2
Geheugen voltage:	1.5 V
Soorten RAID:	0, 1,5, 10
PCI-slots:	3
Intel® Xeon series:	E3-1200
Maximum UDIMM geheugen:	32 GB
Aantal DIMM sloten:	4
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	ATX
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	2.0
Aansluitingen voor behuizingsventilatoren:	3
USB 2.0 aansluitingen:	6
Chassis intrusion aansluiting:	Ja