Supermicro MBD-X9DRH-IF-B Handleiding

Supermicro Moederbord MBD-X9DRH-IF-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X9DRH-IF-B (111 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/111

USER’S MANUAL

Revision 1.0b

X9DRH-7F

X9DRH-iF

X9DRH-7TF

X9DRH-iTF

Manual Revision 1.0b

Release Date: Dec. 13, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

This manu al is writt en fo r sys tem in tegr ators , PC te chn icia ns a nd

knowledgeable PC users. It provides information for the installation and use of the

X9DRH-7F/-iF/-7TF/-iTF motherboard.

About This Motherboard

The Super X9DRH-7F/-iF/-7TF/-iTF motherboard supports dual Intel E5-2600 Se-

ries (Socket R) processors and Intel QPI (QuickPath Interface) Technology (V.1.1),

providing point-to-point connections with transfer speeds of up to 8.0 TG/s. With the

C602 PCH built in, the X9DRH series motherboard supports Intel® Management En-

gineer (ME), Rapid Storage Technology, Digital Media Interface (DMI), PCI-E Gen.

3.0, and up to 1600 MHz DDR3 memory. These features greatly enhance system

performance for high-end server platforms. Please refer to our Website (http://www.

supermicro.com) for processor and memory support updates.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board. It also provides detailed information about the Intel C602 PCH.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules, and other hardware components into

the system. If you encounter any problems, see , which describes Chapter 3

troubleshooting procedures for video, memory, and system setup stored in CMOS.

Chapter 4 includes an introduction to BIOS, and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software installation instructions.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X9DRH-IF-B
Breedte:	330 mm
Diepte:	304.8 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	3
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Aantal USB-aansluitingen:	7
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 2011 (Socket R)
Systeembus:	8 GT/s
PCI Express slots versie:	3.0
Processorfabrikant:	Intel
Maximum intern geheugen:	512 GB
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Chipset moederbord:	Intel® C602
Trusted Platform Module (TPM):	Ja
PCI Express x16 slots:	1
Ondersteunde opslagstationinterfaces:	SATA II, SATA III
Seriële poort(en):	2
PCI Express x8 slots:	6
Component voor:	Server
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel I350-CM2
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	2
Non-ECC:	Ja
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	512 GB
Aantal DIMM sloten:	16
Ondersteunde geheugen types:	DDR3-SDRAM
Ondersteuning voor processor FSB:	2600 MHz
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Trusted Platform Module (TPM) version:	1.2
Moederbord form factor:	Verlengd ATX
Supported memory clock speeds:	800,1066,1333,1600 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	128 Mbit
ACPI version:	4.0
USB 2.0 aansluitingen:	4
TPM connector:	Ja
Aantal SATA II connectors:	8
Intelligent Platform Management Interface (IPMI) support:	Ja
IPMI LAN (RJ-45) port:	Ja
Ondersteunende UDIMM module capaciteit:	16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Supported QPI:	8 GT/s