Supermicro MBD-X8DTL-6-B Handleiding

Supermicro Moederbord MBD-X8DTL-6-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X8DTL-6-B (97 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/97

X8DTL-6

X8DTL-6F

USER’S MANUAL

Revision 1.0a

X8DTL-L

X8DTL-6L

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0a

Date: Nov. 17, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTL-6/

X8DTL-6F/X8DTL-L/X8DTL-6L motherboard.

About this Motherboard

The X8DTL-6/X8DTL-6F/X8DTL-L/X8DTL-6L supports the Intel®

5500/5600 Series Processor, the ﬁ rst dual-processing platform that supports the

Intel QuickPath Interconnect (QPI) Technology, providing the next generation

point-to-point system interface to replace the current Front Side Bus. With the Intel

5500/5600 Series Processor built in, the X8DTL-6/X8DTL-6F/X8DTL-L/X8DTL-6L

substantially enhances system performance with increased bandwidth and un-

precedented scalability optimized for high-end HCP/Cluster systems and intensive

applications. Please refer to our website (http://www.supermicro.com/products/)

for processor and memory updates. This product is intended to be installed and

serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A . Appendix Blists BIOS POST Error Codes provides the Software

Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X8DTL-6-B
Breedte:	305 mm
Diepte:	254 mm
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Ingebouwde grafische adapter:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5500
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x8 slots:	1
PCI Express x4 slots:	3
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel® 82574L
Soorten RAID:	0, 1,5, 10
Non-ECC:	Ja
PCI-slots:	2
Intel® Xeon series:	E5500, E5600, L5500, L5600, X5500, X5600
Maximum UDIMM geheugen:	24 GB
Aantal DIMM sloten:	6
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	ATX
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	3.0
Aansluitingen voor behuizingsventilatoren:	4
USB 2.0 aansluitingen:	3
Chassis intrusion aansluiting:	Ja