Supermicro MBD-X8DT3-LN4F-B Handleiding

Supermicro Moederbord MBD-X8DT3-LN4F-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X8DT3-LN4F-B (97 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/97

X8DT3

X8DTi

USER’S MANUAL

Revision 1.2a

X8DT3-F

X8DTi-F

X8DTi-LN4F

X8DT3-LN4F

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.2s

Release Date: Dec. 20, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X8DT3/

X8DTi/X8DT3-F/X8DTi-F/X8DT3-LN4F/X8DTi-LN4F motherboard.

About this Motherboard

The X8DT3/X8DTi/X8DT3-F/X8DTi-F/X8DT3-LN4F/X8DTi-LN4F supports

the Intel® 5500/5600* Series Processor platform, the ﬁ rst dual-processing platform

that supports the Intel QuickPath Interconnect (QPI) Technology, providing the next

generation point-to-point system interface to replace the current Front Side Bus.

With the 5500/5600* Series Processor platform built in, the X8DT3/X8DTi/X8DT3-

F/X8DTi-F/X8DT3-LN4F/X8DTi-LN4F offers substantial enhancement in system

performance with increased bandwidth and unprecedented scalability optimized

for high-end servers, High Performance Computing (HPC) systems and intensive

applications. Please refer to our web site (http://www.supermicro.com/products/)

for updates on supported processors. This product is intended to be installed and

serviced by professional technicians. (*The 5600 Series processors are supported

by a Rev. 2.00 or later version motherboard.)

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A . Appendix Blists BIOS POST Error Codes provides Software Instal-

lation Instructions.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X8DT3-LN4F-B
Breedte:	305 mm
Diepte:	330 mm
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	5
Meegeleverde software:	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support\nSuper Doctor III
Temperatuur bij opslag:	-40 - 70 °C
Ingebouwde grafische adapter:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5520
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x8 slots:	3
PCI Express x4 slots:	1
Geheugen voltage:	1.35, 1.5 V
Soorten RAID:	0, 1,5, 10
Non-ECC:	Ja
PCI-slots:	2
Maximum UDIMM geheugen:	48 GB
Aantal DIMM sloten:	12
Ondersteunende RDIMM klok snelheden:	800,1066,1333 MHz
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 4GB, 8GB
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	Verlengd ATX
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	3.0
Aansluitingen voor behuizingsventilatoren:	6
USB 2.0 aansluitingen:	2
Chassis intrusion aansluiting:	Ja