Supermicro MBD-X8DAI-O Handleiding

Supermicro Moederbord MBD-X8DAI-O

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X8DAI-O (99 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/99

X8DA3

USER’S MANUAL

Revision 1.1

SUPER

X8DAi

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.1

Release Date: March 12, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more

of the following measures: Reorient or relocate the receiving antenna. Increase the separation

between the equipment and the receiver. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer or an experienced radio/television

technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X8DA3/

X8DAi motherboard.

About This Motherboard

The X8DA3/X8DAi supports the Intel 5500/5600 Series Processor platform,

the ﬁ rst dual-processing platform that supports the Intel QuickPath Interconnect

(QPI) Technology, which provides the next generation point-to-point system inter-

face, replacing the current Front Side Bus. With the 5500/5600 Series Processor

built-in, this motherboard substantially enhances system performance with in-

creased bandwidth and unprecedented scalability, optimized for workstations, high-

end CAD systems and intensive applications. Please refer to our website (http://

www.supermicro.com/products/) for processor updates. This product is intended to

be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory and other hardware components into the system.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes provides information on running the CMOS Setup utility.

Appendix A . Appendix Blists BIOS POST Error Codes and Appendix C provide

the Windows OS and Other Software Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Warning: Important information given to ensure proper system installation

or to prevent damage to the components.

Note: Additional Information given to differentiate various models or to

ensure correct system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X8DAI-O
Breedte:	305 mm
Diepte:	330 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	4
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	Socket B (LGA 1366)
Processorfabrikant:	Intel
Maximum intern geheugen:	192 GB
Luchtvochtigheid bij opslag:	5 - 95 procent
Audio-uitgangskanalen:	7.1 kanalen
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5520
RAID support:	Ja
Ondersteunde opslagstationinterfaces:	SATA II
PS/2 poort(en):	2
Seriële poort(en):	2
PCI Express x4 slots:	1
Component voor:	Workstation
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel 82573L, Intel 82573V
Soorten RAID:	1, 5,10
Non-ECC:	Ja
Wake-on-LAN:	Ja
PCI-slots:	3
Aantal ondersteunde processoren:	2
Intel® Xeon series:	E5500, E5600, L5500, L5600, X5500, X5600
Maximum UDIMM geheugen:	48 GB
Aantal DIMM sloten:	12
Ondersteunende RDIMM klok snelheden:	800,1066,1333 MHz
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Moederbord form factor:	Verlengd ATX
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	3.0
Ondersteuning voor parallel processing:	Niet ondersteund
USB 2.0 aansluitingen:	6
IEEE1394 aansluitingen:	2
Aantal SATA II connectors:	6
PCI Express x16 (Gen 2.x) slots:	2
Intelligent Platform Management Interface (IPMI) support:	Ja
Processor aantal cores ondersteund:	6
Supported QPI:	6.4 GT/s