Supermicro MBD-X7DWE-O Handleiding

Supermicro Moederbord MBD-X7DWE-O

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X7DWE-O (91 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/91

X7DWE

USER’S MANUAL

Revision 1.0c

SUPER

Manual Revision 1.0c

Release Date: June 23, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X7DWE

motherboard. The X7DWE supports dual Intel® Quad-Core and Dual-Core

Xeon™ 5400/5300/5200/5100 Series processors with a front side bus speed of up to

1.6 GHz. With two 64-bit Quad-Core and Dual-Core processors built-in, the X7DWE

offers substantial functionality enhancements to the motherboards based on the Intel

Core Microarchitecture core while remaining compatible with the IA-32 software. The

features include Intel Virtualization Technology, Enhanced Intel SpeedStep technol-

ogy, Advanced Dynamic Execution, Advanced Transfer Cache, and Streaming SIMD

Extensions 4.1 (SSE4.1). These features allow the motherboard to operate at much

higher speeds with better power management in much safer thermal environments

than the traditional motherboards. The X7DWE is ideal for high performance quad-

processor or dual-processor (DP) workstation and enterprise server environments.

Please refer to our website (http://www.supermicro.com/products/) for updates on

supported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists POST Error Beep Codes. Appendix B and Appendix C list

Windows OS and Other Software Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	MBD-X7DWE-O
Breedte:	306 mm
Diepte:	254 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	FCC
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 771 (Socket J)
Processorfabrikant:	Intel
Maximum intern geheugen:	32 GB
Ingebouwde grafische adapter:	Ja
On-board graphics adapter model:	XGI Z9S
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5400
Geheugen kanaal:	Dubbelkanaals
Ondersteunde opslagstationinterfaces:	SATA II
PS/2 poort(en):	2
Seriële poort(en):	1
PCI Express x8 slots:	4
PCI Express x4 slots:	4
Component voor:	Server
Geheugen voltage:	1.5, 1.8 V
Soorten RAID:	0, 1,5, 10
Aantal ondersteunde processoren:	2
Intel® Xeon series:	5000
Aantal DIMM sloten:	4
Ondersteunend DIMM module capaciteiten:	1GB, 256MB, 2GB, 4GB, 512MB, 8GB
Ondersteunde geheugen types:	DDR2-SDRAM
Ondersteuning voor processor FSB:	1066,1333,1600 MHz
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
PCI-X slots:	4
Moederbord form factor:	ATX
Supported memory clock speeds:	533,667,800 MHz
BIOS type:	Phoenix
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	2.0
Ondersteuning voor parallel processing:	Niet ondersteund
Aansluitingen voor behuizingsventilatoren:	6
USB 2.0 aansluitingen:	2
Chassis intrusion aansluiting:	Ja
Aantal SATA II connectors:	6
IPMI LAN (RJ-45) port:	Ja
On-board graphics adapter geheugen:	32 MB
Processor aantal cores ondersteund:	2, 4