Supermicro H8SCM-F Handleiding
Supermicro
Moederbord
H8SCM-F
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro H8SCM-F (72 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/72
H8SCM
H8SCM-F
USER’S MANUAL
Revision 1.0c
®
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0c
Release Date: April 1, 2011
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2011 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
Preface
iii
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
H8SCM(-F) serverboard.
The H8SCM(-F) serverboard is based on the AMD® SR5650/SP5100
chipset and supports one AMD Socket C32 type processor with up to
16GB of ECC/Non-ECC UDIMM or up to 64GB of ECC RDIMM. The H8SCM
serverboard does not have IPMI capability, whereas the H8SCM-F serverboard
does.
Please refer to the motherboard specifi cations pages on our web site for updates on
supported processors (http://www.supermicro.com/aplus/). This product is intended
to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your motherboard
box, describes the features, specifi cations and performance of the motherboard
and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the motherboard in a chassis. Also refer to this chapter to connect the hard disk
drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup confi guration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | H8SCM-F |
Breedte: | 244 mm |
Diepte: | 218 mm |
Ethernet LAN: | Ja |
Aantal USB 2.0-poorten: | 7 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Temperatuur bij opslag: | -40 - 70 °C |
Processor socket: | Socket C32 |
PCI Express slots versie: | 2.0 |
Processorfabrikant: | AMD |
Maximum intern geheugen: | 128 GB |
On-board graphics adapter model: | Matrox G200eW |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
Chipset moederbord: | AMD SR5690 |
PCI Express x16 slots: | 1 |
Ondersteunde opslagstationinterfaces: | SATA II |
PS/2 poort(en): | 1 |
Seriële poort(en): | 1 |
PCI Express x8 slots: | 1 |
PCI Express x4 slots: | 1 |
Component voor: | Server |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | Intel® 82574L |
Soorten RAID: | 0, 1,10 |
Non-ECC: | Ja |
Aantal ondersteunde processoren: | 1 |
Maximum UDIMM geheugen: | 32 GB |
Aantal DIMM sloten: | 4 |
Ondersteunend DIMM module capaciteiten: | 16GB, 1GB, 2GB, 32GB, 4GB, 8GB |
Ondersteunde geheugen types: | DDR3-SDRAM |
Wifi: | Nee |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
AMD Opteron series: | 4000 |
Moederbord form factor: | micro ATX |
Supported memory clock speeds: | 1066,1333,1600 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 16 Mbit |
ACPI version: | 2.0 |
Aansluiting voor CPU koeler: | Ja |
Aantal SATA-aansluitingen: | 6 |
USB 2.0 aansluitingen: | 5 |
Supported processor sockets: | Socket C32 |
Serial port headers: | 2 |
IPMI LAN (RJ-45) port: | Ja |
On-board graphics adapter geheugen: | 16 MB |
Processor aantal cores ondersteund: | 4, 8 |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro H8SCM-F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024