Supermicro H8DMT-IBXF Handleiding
Supermicro
Moederbord
H8DMT-IBXF
Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro H8DMT-IBXF (64 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/64
H8DMT/H8DMT-F
H8DMT-IBX/H8DMT-IBXF
Serverboards
User’s Manual
Revison 1.0a
H8DMT/H8DMT-IBX H8DMT-F/H8DMT-IBXF
H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0a
Release Date: March 6, 2009
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2008 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users. It provides information for the installation and use of the H8DMT/H8DMT-IBX/
H8DMT-F/H8DMT-IBXF serverboards. All these serverboards are based on the nVidia
MCP55 Pro chipset and support AMD Opteron™ processors with up to 64 GB of
DDR2-800/667/533/400 registered ECC SDRAM.
The differences between these serverboards is that some have full IPMI capability,
some have InfiniBand components and some have both or neither capability. Refer to
the chart below for details on which boards have which capabilities.
Please refer to the motherboard specifications pages on our web site for updates on
supported processors (http://www.supermicro.com/aplus/). This product is intended to
be professionally installed.
Manual Organization
Chapter 1 – This chapter includes a checklist of what should be included in your
Serverboard box. It also describes the features, specifications and performance of the
Serverboard along with detailed information about the chipset.
Chapter 2 – This chapter begins with instructions on handling static-sensitive devices.
Read this chapter when installing the processor(s) and memory modules and when
installing the motherboard in a chassis. Also refer to this chapter to connect the hard
disk drives, the various ports, power and reset buttons and system LEDs. Sections on
enabling SATA RAID and system drivers are also included.
Chapter 3 – If you encounter any problems, see this chapter, which describes
troubleshooting procedures for the video, memory and the setup configuration stored in
CMOS. For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support.
Chapter 4 – This chapter includes an introduction to the motherboard’s BIOS and
provides detailed information on running the CMOS Setup utility.
Appendix A – This appendix provides BIOS Error Beep Code Messages.
Appendix B – This appendix lists BIOS POST Checkpoint Codes.
Serverboard Full IPMI
Capability
InfiniBand
Components
H8DMT - -
H8DMT-F X -
H8DMT-IBX - X
H8DMT-IBXF X X
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | H8DMT-IBXF |
Breedte: | 165 mm |
Diepte: | 416 mm |
Aantal USB 2.0-poorten: | 2 |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Certificering: | RoHS |
Temperatuur bij opslag: | -40 - 70 °C |
Processor socket: | Socket F (1207) |
Maximum intern geheugen: | 64 GB |
Ingebouwde grafische adapter: | Ja |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
PCI Express x16 slots: | 1 |
Geheugen kanaal: | Dubbelkanaals |
Ondersteunde opslagstationinterfaces: | SATA II |
PS/2 poort(en): | 2 |
Seriële poort(en): | 2 |
Geheugen voltage: | 1.8 V |
LAN controller: | Intel® 82575 |
Soorten RAID: | 0, 1,0+1, 5 |
Aantal DIMM sloten: | 8 |
Ondersteunend DIMM module capaciteiten: | 1GB, 256MB, 2GB, 4GB, 512MB, 8GB |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Supported memory clock speeds: | 533,667,800 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 8 Mbit |
ACPI version: | 2.0 |
USB 2.0 aansluitingen: | 4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro H8DMT-IBXF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
16 November 2024
16 November 2024
15 November 2024
14 November 2024
13 November 2024
12 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024