Supermicro B12DPE-6 Handleiding
Supermicro
Moederbord
B12DPE-6
Lees hieronder de š handleiding in het Nederlandse voor Supermicro B12DPE-6 (148 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/148
USER'S MANUAL
Revision 1.0
B12DPE-6
The information in this userās manual has been carefully reviewed and is believed to be accurate. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING, OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in an industrial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturerās instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. āPerchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorateā.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiļ¬ cant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: May 18, 2021
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright Ā© 2021 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the B12DPE-6 motherboard.
About This Motherboard
The Supermicro B12DPE-6 supports dual 3rd Gen IntelĀ® XeonĀ® Scalable processors (in
Socket-P+) with up to 38 CPU cores and a thermal design power (TDP) of up to 270W. Built
with the Intel LBG-2/LBG-4 chipset, the B12DPE-6 motherboard supports up to 8TB 3DS
LRDIMM/LRDIMM/3DS RDIMM/RDIMM DDR4 ECC memory with speeds up to 3200 MHz in
32 DIMMs, and up to 12TB IntelĀ® Optaneā¢ PMem 200 Series memory (512GB x16 + 256GB
x16) with speeds up to 3200 MHz. (See the notes below). This motherboard features superior
IO capability, including dual 25G onboard Mellanox ConnectX-4 connectors, one mezzanine
connector (with dual 25G Ethernet support), and two Supermicro proprietary PCIe Gen2/3 x16
add-on modules (AOMs) that support three SATA3 HDDs/SSDs or three NVMe SSDs. It also
offers the most advanced data protection features with TPM (Trusted Platform Module) and
RoT (Root of Trust) support. The B12DPE-6 is optimized for High Performance Computing
(HPC), high-density applications and is ideal for use in 6U SuperBlade servers that require
high-speed IO and disaggregated front IO card support. Please note that this motherboard is
intended to be installed and serviced by professional technicians only. For processor/memory
updates, please refer to our website at http://www.supermicro.com/products/.
Note 1: The IntelĀ® OptaneTM Persistent Memory (PMem) 200 Series are supported by
the 3rd gen Intel Xeon Scalable (83xx/63xx/53xx/4314 Series) Processors.
Note 2: DDR4 3200 MHz memory is supported by the 3rd Gen Intel Xeon Scalable
(83xx/63xx Series) Processors only.
Note 3: Memory speed support and Intel PMem memory size support depend on the
processors used in the system.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or to provide in-
formation for proper system setup.
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | B12DPE-6 |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro B12DPE-6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
4 December 2024
26 Juli 2024
15 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
29 Mei 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024