Supermicro AOC-UTG-I2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro AOC-UTG-I2 (18 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
AOC-UTG-I2 Add-on Card
Users Manual
Revison 1.0b
AOC-UTG-I2 Add-on Card User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0b
Release Date: October 15, 2009
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document. Information in this document is subject to change without notice.
Portions of this document Intel® Corporation
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
i
Preface
Overview
This manual is written for system integrators, PC technicians and knowledgeable PC
users who intend to integrate Supermicro's AOC-UTG-I2 add-on card.
Product Features
The AOC-UTG-I2 offers the following features:
High-performing, PCI-E 10Gb Ethernet connection ideally suited for demanding
enterprise applications.
Dual-port Intel® 82598EB with two CX4 connectors.
CX4-to-Optical module/cable (optional).
PCI-E p3-x8 to maximize performance (PCI-E Gen 2 compatible).
Intel I/O Acceleration Technology (I/O AT) for improved CPU utilization.
x16 Virtual Machine Device queues (VMDq) for virtualized environment.
Direct Cache Access (DCA) to eliminate cache misses and reduce CPU load.
Tx/Rx, IP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities to increase
throughput and lower processor utilization
Simple Network Management Protocol (SNMP) and Remote Network Monitoring
(RMON) statistic counters.
• Intel® PROSet Utility for teaming
Preboot eXecution Environment (PXE) support.
Energy-efficient design (maximum 6.5W).
RoHS Compliant 6/6.
Supported Operating Systems
The AOC-UTG-I2 supports the following Operating Systems (OS):
Windows
Linux
VMWare ESX Server
Required Cables
The AOC-UTG-I2 requires the following cables:
CX4 copper-based cable. Maximum length 15 meters.
InfiniBand 4x DDR cable (converts CX4 to optical). Maximum length 100 meters.


Product specificaties

Merk: Supermicro
Categorie: Netwerkkaart/adapter
Model: AOC-UTG-I2
Kleur van het product: Groen
Diepte: 166.9 mm
Hoogte: 98 mm
Snoerlengte: 100 m
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Interface: Ethernet
Voldoet aan industriestandaarden: RoHS 6/6
Meegeleverde software: Intel PROSet Utility f/ Windows Device Manager
Intern: Ja
Compatibele besturingssystemen: Windows, Linux, VMWare
Netwerkfuncties: 10 Gigabit
Hostinterface: PCI Express
Maximale overdrachtssnelheid van gegevens: - Mbit/s
Soort kabel: CX4 /Intel_Connects_Cable(optical)
Aansluiting(en): 2 x CX4
Draadloze verbindingen: Ja
Jumbo Frames ondersteuning: Ja
Component voor: PC
Wifi: Nee
Stroomverbruik (typisch): 6.5 W
Bedrijfstemperatuur (T-T): 0 - 55 °C
Code geharmoniseerd systeem (HS): 85176990
Aantal poorten: 2

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro AOC-UTG-I2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Netwerkkaart/adapter Supermicro

Handleiding Netwerkkaart/adapter

Nieuwste handleidingen voor Netwerkkaart/adapter