Supermicro A2SDi-H-TP4F Handleiding

Supermicro Moederbord A2SDi-H-TP4F

Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro A2SDi-H-TP4F (106 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/106
USER’S MANUAL
Revision 1.0
A2SDi-H-TP4F/TF
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: Handling of lead solder materials used in this product may expose you to lead, a
chemical known to the State of California to cause birth defects and other reproductive harm.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: December 04, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the A2SDi-H-TP4F/TF motherboard.
About This Motherboard
The Supermicro A2SDi-H-TP4F/TF motherboard comes with an integrated Intel® Atom
SoC C3000 series (FCBGA1310) that has up to 16 Cores, a TDP of 32W and is optimized
for low-power consumption. The integrated memory controller supports up to 256GB of
DDR4 ECC memory with a max data rate of 2400MHz, USB 3.0, and 10GbE Ethernet. The
A2SDi-H-TP4F/TF motherboard is an excellent choice for embedded storage solutions.
Please note that this motherboard is intended to be installed and serviced by professional
technicians only.
For processor/memory updates, please refer to our website at http://www.supermicro.com/
products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: A2SDi-H-TP4F
Breedte: 170.2 mm
Diepte: 170.2 mm
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 2
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Duurzaamheidscertificaten: RoHS
Temperatuur bij opslag: -45 - 85 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: 11
Thermal Design Power (TDP): 31 W
Processorfabrikant: Intel
Maximum intern geheugen: 64 GB
Luchtvochtigheid bij opslag: 10 - 95 procent
Audio-uitgangskanalen: - kanalen
ECC: Ja
Ethernet interface type: 10 Gigabit Ethernet, Gigabit Ethernet
Geheugen slots type: DIMM
Geheugen voltage: 1.2 V
Aantal SATA III connectors: 12
Compatibele processors: Intel Atom®
Ondersteunde geheugen types: DDR4-SDRAM
Bedrijfstemperatuur (T-T): 0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Code geharmoniseerd systeem (HS): 84733020
Moederbord chipset familie: Intel
Moederbord form factor: mini ITX
Aantal geheugenslots: 4
Supported memory clock speeds: 1600,1866,2133,2400 MHz
BIOS type: UEFI AMI
USB 2.0 aansluitingen: 2
USB 3.2 Gen 1 (3.1 Gen 1)-aansluitingen: 1
UEFI-versie: 2.4

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro A2SDi-H-TP4F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden