Sunstech CUBTS200 Handleiding

Sunstech Radio CUBTS200

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunstech CUBTS200 (28 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

Mp3

INSTRUCTION MANUAL

AM/FM STEREO RADIO WITH PLL TUNING

CD/MP3/AUX /USB/BLUETOOTH/ALARM

CUBTS200

For Customer Use

Ente r below the Seria l No. whi ch is located

On the bottom of the cabin et. Re tain t his

Info rmati on for future re ference.

Mod e No.:

Serial No.:

EN-2

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT

REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS

INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

1. DO NOT place objects on top of the

device, as objects may scratch the

device.

2. DO NOT expose the device to dirty

or dusty environments.

3. DO NOT place the device on an

uneven or unstable surface.

4. DO NOT insert any foreign objects

into the device.

5. DO NOT expose the device to strong

magnetic or electrical field.

6. DO NOT expose the device to direct

sunlight as it can damage the device.

Keep it away from heat sources.

7. DO NOT store your device in

temperatures higher than 40°C(104°F).

The internal operating temperature for

this device is from 20°C(68°F) to

60°C(140°F).

8. DO NOT use the device in the rain.

9. Please check with your Local

Authority or retailer for proper

disposal of electronic products.

10. The device and adaptor may product

some heat during normal operation of

charging. To prevent discomfort or injury

from heat exposure, DO NOT leave the

device on your lap.

11. POWER INPUT RATING:

Refer to the rating label on the device and

be sure that the power adaptor complies

with the rating. Only use accessories

specified by the manufacturer.

12. Clean the device with a soft cloth. If

needed, dampen the cloth slightly before

cleaning. Never use abrasives or cleaning

solutions.

13. Always power off the device to install

or remove external devices that do not

support hot-plug.

14.Disconnect the device from an electrical

outlet and power off before cleaning the

device.

15. DO NOT disassemble the device. Only a

certified service technician should perform

repair.

16. The device has apertures to disperse heat.

DO NOT block the device ventilation, the

device may become hot and malfunction as a

result.

17. Risk of explosion if battery replaced by an

incorrect type. Dispose of used batteries

according to the instruction.

18. PLUGGABLE EQUIPMENT: the socket-outlet

shall be installed near the equipment and shall

be easily accessible.

PREPARATION FOR USE

Unpacking and Setup

* Carefully remove the unit from the display carton and remove all packing material from

the unit itself.

* Remove any descriptive labels that may be found on either the front or top cabinet of the unit.

Do not remove any labels located on either the back or button cabinet of the unit.

Power Sources

Using AC Power

Connect the AC power into Standard household wall outlet.

Using AC power

1.check if the power voltage, as shown on the type plate located on the bottom of the set,

corresponds to your local ac power supply if it does not consult your dealer or service centre.

2.connect the power cord to the ac mains inlet and the wall outlet. the power supply is now

connected and ready for use.

3.to switch off completely, unplug the power cord from the wall outlet.

unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.

Batteries for the unit (not included)

Open the battery compartment and insert six batteries, type LR14, UM-2 or C-cells,

(preferably Alkaline) with the correct polarity as indicated by the + and - symbols

inside the compartment.

Batteries contains chemical substances, so they should be disposed of properly.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or

cause the batteries to burst. Therefore:

Do not mix battery types: e.g. alkaline with carbon Zinc. Only use batteries of the same

type for the set.

When inserting new batteries, do not try to mix old batteries with new ones.

Remove the batteries if the set is not be used for a long time.

Power Supply

EN-1

Know these

safety symbols

CLASS 1

LASER PRODUCT

EN-3 EN-4

CONTROLS POWER SUPPLY

English

1. STEREO HEADPHONE JACK

2. VOLUME BUTTON

3 POWER/ALARM OFF BUTTON.

4 SD CARD JACK.

5. FUNCTION BUTTON

6. SNOOZE/REPEAT/MEMORY BUTTON

7 PLAY/PAUSE/TIME BUTTON.

8. USB JACK

10. CLOCK BACK)/CLOCK NEXT) BUTTON-( +(

11. AUX JACK

12. LCD DISPLAY

13. STANDBY INDICATOR

14 LEFT & RIGHT SPEAKER.

15 FM ANTENNA.

16. AC SOCKET

17.

18. BATTERY DOOR

9 STOP/SLEEP BUTTON.

VOLTAGE SELECTOR

BASIC FUNCTION see 1 )( fig

CLOCK NEXT BUTTON+( ）

-To setup the time of unit .

-To select next track of USB SD / .

- Press this button . 1 5 sec forward

search intra track.

-In the radio mode, press this button will enter

the high-end manual channel scan mode.

11 AUX JACK.

- , Select AUX mode inset aux jack to play

、、 .mp3 discman walkman

12 LCD DISPLAY.

-To show the time and tracks number of

.the USB and the frequency of the radio

13. STANDBY INDICATOR

14 LEFT & RIGHT SPEAKER.

15 FM ANTENNA.

16. AC SOCKET

18 BATTERY DOOR.

-To open battery compartment.

17.VOLTAGE SELECTOR

-To select the voltage.

1 STEREO HEADPHONE JACK.

-To insert a 3 5mm stereo headphone . .

2 VOLUME BUTTON .

-Adjust volume level.

3 POWER ALARM OFF BUTTON. /

- Press POWER button / .to turn on off power

- Shut down the alarm.

-To delete the alarm setup .

4 SD CARD JACK.

-To listen to your SD card with Mp3 music files .

5 FUNCTION SELECTOR.

-To select mode by ALARM USB SD BLUE / / / /

/ .AUX RADIO

- . Setup the time format by 12h or 24h

6 SNOOZE REPEAT MEMORY BUTTON. / /

- Press to stop alarm, after Nine

.minutes alarm will again ringing

-To repeat a track of the USB SD / .

-FM 30 preset memories,

7 PLAY PAUSE TIME BUTTON. / /

-To start or pause USB SD BLUE play / / .

-In the radio mode, long press the play/pause/time

button enter the automatic channel scan mode.

-To setup the time of the unit .

-To setup the alarm time.

8 USB JACK.

-To listen to your USB with Mp3 music files .

10 CLOCK BACK CLOCK NEXT BUTTON. -( ）/ +( ）

CLOCK BACK BUTTON-( ）

-To setup the time of unit .

-To select back track of USB SD BLUE / / .

-Press this button . 1 5 sec backward search intra track.

- In the radio mode, press this button will enter

the low end of the manual channel scan mode.

AM 30 preset memories.

9 STOP SLEEP BUTTON. /

-To stop USB SD play / .

-To setup the power off time .

-To setup the sleep time .

15 16

1 2 34710

911

12 13 14

FIG

Product specificaties

Merk:	Sunstech
Categorie:	Radio
Model:	CUBTS200
Kleur van het product:	Black, Blue
Ingebouwd display:	Ja
Gewicht:	955 g
Breedte:	236 mm
Diepte:	180 mm
Hoogte:	110 mm
Geïntegreerde klok:	Ja
Stroombron:	AC/Batterij
Bluetooth:	Ja
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Aantal USB 2.0-poorten:	1
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	3 W
Aantal ingebouwde luidsprekers:	2
Ondersteund aantal accu's/batterijen:	6
Volumeregeling:	Draaiknop
Hoofdtelefoonuitgangen:	1
Beeldscherm, aantal kleuren:	Monochroom
Soort tuner:	Digitaal
Ingangsspanning:	220 V
Wekker:	Ja
Backlight-kleur:	Blauw
Handvat(en):	Ja
MP3 afspelen:	Ja
AUX ingang:	Ja
Ondersteunde frequentiebanden:	AM, FM
Radio:	Draagbaar
Apple docking-compatibiliteit:	Niet ondersteund
Slaaptimer:	Ja
Type beeldscherm:	LCD
Type batterij:	C