Sun Joe SPX-EPB1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe SPX-EPB1 (24 pagina's) in de categorie Hogedrukreiniger. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Original instructions.
© 2022 Snow Joe, LLC. All rights reserved. SAVE THESE INSTRUCTIONS
A Division of Snow Joe, LLC Model SPX-EPB1 Form No. SJ-SPX-EPB1-880E-M
R
OPERATOR’S MANUAL
1
EN
18
-
FT TELESCOPING
PRESSURE WASHER SKY LANCE
4200 PSI MAX PRESSURE
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious injury.
General Safety
mWARNING! This tool is not intended for use by children
or by unassisted, unsupervised persons whose physical,
sensory or mental capabilities prevent them from using it
safely. Children should be supervised to ensure that they do
not play with the tool.
Before starting up your tool, please check it carefully for any
defects. If you find any, do not start up your tool. Instead,
contact your authorized Snow Joe® + Sun Joe® dealer or
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the tool, basic safety
precautions should always be followed to reduce the risk of
electric shock and personal injury. These include:
• Work area – Always inspect the work area for
obstructions or hazards.
• Stay away from power lines – Keep at least 50 feet away
from power lines. Do not touch or aim water at electrical
wiring of any kind.
• Avoid adjustments while in use – Do not extend or
retract the sky lance, change nozzles or accessories while
the tool is in use or under pressure.
• Shut down – Prior to performing any adjustments,
maintenance or when not in use, turn off the pressure
washer, shut off the water supply, point the nozzle in a
safe direction, and pull the trigger to release the water
pressure before making any changes.
• Stay alert – Watch what you are doing. Use common
sense. Do not use the tool on a ladder or scaffolding.
Do not work when you are tired or under the influence of
drugs, alcohol, or other medication.
• Tripping hazard – Keep the high pressure hose clear of
the working area. Avoid stepping or tripping over the hose.
• Slipping hazard – Never run while operating the tool.
Maintain proper footing and balance at all times to avoid
slipping or falling. Wear non-slip footwear to improve your
footing on slippery surfaces.
• Avoid unintentional discharge – Do not carry a
connected tool with your hand on the trigger. Make sure
the safety switch is engaged before connecting to the
pressure washer.
• Do not exceed specifications – Do not exceed the
maximum rated pressure, temperature or flow rate listed in
the technical data.
• Inspect the tool – Visually inspect the tool for any loose
fasteners or blocked connections.
2
Know Your 18
-
ft Telescoping Pressure Washer Sky Lance
Read the owner’s manual and safety instructions carefully before operating this sky lance. Compare the illustration below to the
unit in order to become familiar with the location of the various controls and adjustments. Save this manual for future reference.
Technical Data
Length 5' ........................................................
-
18' (1.5
m
-
5.5
m)
Max Pressure 4200 PSI ...............................................................
Max Flow 6.6 GPM (25 L/min) .....................................................
Max Temperature 140°F (60°C) ...................................................
Net Weight 9.9 lbs (4.5 kg) ..........................................................
1. Brush
2. Quick-
Connect collar
3. Brush mount
4. Lance section
5. Cam-lock
6. Foam grip
7. Shoulder
strap mount
8. Safety switch
9. Trigger
10. Water inlet (high-
pressure hose
connection)
11. S4 + S5
allen keys
12. Quick-Connect
to M22 high-
pressure hose
adapter
13. U-pin
14. Shoulder strap
1
2
4
9
5
6
7
8
10
11
14
12
3
13
2. Insert the end of the hose into the valve and fix it in place
using the U-pin (Fig. 2).
3. Open the cam-lock and slide the brush mount forwards
(Fig. 3).
4. Screw the brush onto the brush mount so that it is facing
down, in line with the quick-connect collar (Fig. 4).
Fig. 2
U-pin Hose
Valve
Fig. 3
Brush mount
Cam-lock
Fig. 4
Brush
Brush mount
Quick-Connect collar
3
Unpacking
Carton Contents
• Lance sections
• Quick-Connect to M22 high-pressure hose adapter
• Shoulder strap
• S4 allen key
• S5 allen key
• U-pin
• Manual with registration card
1. Carefully remove the sky lance and check to see that all of
the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the sky lance. The
packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts.Theseitemscanbeswallowedandposeasuocation
risk!
Assembly
1. Connect the lance sections together. Feed the hose
attached to the brush mount thorugh all the sections. Use
the cam-locks to fix them in place (Fig. 1).
Fig. 1
Lance
sections
Hose


Product specificaties

Merk: Sun Joe
Categorie: Hogedrukreiniger
Model: SPX-EPB1

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe SPX-EPB1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hogedrukreiniger Sun Joe

Handleiding Hogedrukreiniger

Nieuwste handleidingen voor Hogedrukreiniger