Sun Joe MJ-HVR12E Handleiding

Sun Joe Grasmaaier MJ-HVR12E

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe MJ-HVR12E (42 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/42

®, LLC

A Division of Snow Joe

®, LLC Model MJ-HVR12E Form No. SJ-MJ-HVR12E-880E-MR2

OPERATOR’S MANUAL

ELECTRIC HOVER BLADE

GRASS CUTTER

11-INCH | 10-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

When using this electric hover blade grass cutter, basic safety

precautions should always be followed to reduce the risk of

re, electric shock and personal injury. These precautions

include:

mWARNING! The use of any other accessory or

attachment might increase the risk of injury.

mWARNING! To reduce the risk of injury, inspect the

unit assembly frequently and replace with recommended

replacement if there are signs of wear or deterioration.

Before using the grass cutter, take the time to familiarize

yourself with the controls, especially how to stop the grass

cutter in an emergency. The only individuals who should use

the grass cutter are those who have a thorough understanding

of the instructions and who know how to operate the machine.

Children should never be allowed access to the grass cutter.

Retain this manual for future reference and reread it at the start

of each mowing season.

mWARNING! Contact with moving parts may cause

entanglement, dismemberment or other serious bodily

injury. Always keep body parts (i.e. hands, feet) a safe

distance away from moving parts. Ensure all covers and

guards are securely in place before use.

Hot surfaces (i.e. the motor) may ignite ammable or

combustible items and cause a re or explosion, which

can result in serious bodily injury. Keep the grass cutter a

safe distance away from ammable or combustible items

until surfaces that are hot have completely cooled. Do

not store the grass cutter near ammable or combustible

items.

Damaged blades may break o the grass cutter assembly

and cause serious injury. Replace the damaged blade

before using the grass cutter.

1. Avoid dangerous conditions – Do not use the grass

cutter in the rain or when the grass is damp or wet.

2. Keep children, bystanders and pets away –

Always keep children, pets, and spectators a safe

distance away from the grass cutter during operation and

as the machine cools.

3. Dress properly – Always wear personal safety gear

(i.e. glasses, rubber gloves, protective footwear and dust

masks) and proper clothing when using the grass cutter.

Loose clothing, long hair or jewelry may get caught in the

moving parts.

4. Use the right appliance – Do not use the hover grass

cutter for any applications other than those for which it

was intended.

5. Do not force the hover grass cutter – It will perform

better with less likelihood of personal or mechanical injury

if it is used at the rate for which it was designed.

6. Do not overreach – Keep proper footing and balance at

all times.

7. Stay alert – Always be alert and watch what you are

doing. Use common sense. Do not operate the hover

grass cutter when you are tired or under the inuence of

alcohol or drugs.

8. Disconnect the hover blade grass cutter – Turn OFF

and unplug the grass cutter when it's not in use, before

servicing it, when changing accessories and when

performing any other maintenance task.

9. Store idle hover grass cutter indoors – When not in use,

the hover grass cutter should be stored indoors in a dry,

locked place out of the reach of children.

10. Maintain the hover grass cutter with care – Keep

cutting edges sharp and clean for best and safest

performance.

11. Use personal protective equipment. Always wear eye

protection – Protective equipment such as safety glasses,

a dusk mask, non-skid safety shoes, a hard hat, and

hearing protection, when used for appropriate conditions,

will reduce the possibility of personal injuries.

12. Avoid unintentional starting – Ensure the switch is in the

OFF position before plugging the unit, or before picking up

or carrying the tool. Carrying power tools with your nger

on the switch can lead to accidents.

13. Keep cutting blades sharp and clean – Properly

maintained cutting blades with sharp edges are less likely

to bind and are easier to control.

14. Keep all parts of the body away from the cutting

blades – Do not remove cut material or hold material to be

cut when blades are moving. Make sure the switch is o

when clearing jammed material. A moment of inattention

while operating the product may result in serious personal

injury.

15. Check for damaged parts – Before further use of the

appliance, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

the alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other condition that

may aect the tool’s operation. A guard or other part that

is damaged should be properly repaired or replaced by an

authorized service center unless indicated elsewhere in

this manual.

16. If the hover blade grass cutter strikes a foreign object,

follow these steps:

i) Stop the hover blade grass cutter by releasing the

start/stop switch bar lever.

ii) Unplug the cord.

iii) Inspect for damage.

iv) Repair any damage before restarting and operating

the hover blade grass cutter.

17. Only use identical replacement blades and other genuine

parts.

18. Keep guards in place and in proper working order.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for the

hover blade grass cutter. Receptacles are available having

built-in GFCI protection and may be used for this measure

of safety.

2. To reduce the risk of electric shock, this appliance has

a polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized, UL-listed (CSA

certied in Canada) extension cord recommended for

outdoor use. The appliance plug will t into a polarized

extension cord only one way.

If the appliance plug does not t fully into the extension

cord, reverse the plug. If the plug still does not t, obtain

a correct polarized extension cord. A polarized extension

cord will require the use of a polarized wall outlet.

The extension cord plug will t into the polarized wall

outlet only one way. If the plug does not t fully into the

wall outlet, reverse the plug. If the plug still does not t,

contact a qualied electrician to install the proper wall

outlet. Do not modify the appliance plug, extension cord

receptacle, or extension cord plug in any way.

3. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW, SOW, STW, STOW,

SJTW, or SJTOW.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

4. To prevent the appliance cord from disconnecting from the

extension cord during operation, make a knot with the two

cords as shown in Table 1.

5. Do not abuse the cord. Never pull the hover blade grass

cutter by the cord or yank the cord to disconnect it from

the receptacle. Keep the cord away from heat, oil, and

sharp edges.

Extension Cord

Length

Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

16 14

m WARNING m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the hover blade grass cutter

to make contact with water while it is in operation. If

the appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA-, or ETL-rated extension cord for

outdoor, all-weather use.

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

Cord set

(B) Connect plug and receptacle

Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation

are provided instead of grounding. No grounding means are

provided on a double-insulated appliance, nor should a means

for grounding be added to the appliance. Servicing a double-

insulated appliance requires extreme care and knowledge

of the system, and should be performed only by qualied

service personnel at an authorized Snow Joe® + Sun Joe®

dealer. Replacement parts for a double-insulated appliance

must be identical to the parts they replace. A double-insulated

appliance is marked with the words “Double Insulation” or

“Double Insulated.” The symbol (square within a square)

may also be marked on the appliance.

DOUBLE-INSULATED: GROUNDING NOT

REQUIRED. WHEN SERVICING, USE ONLY

IDENTICAL REPLACEMENT PARTS.

This electric hover blade grass cutter is double-insulated,

eliminating the need for a separate grounding system. Use

only identical replacement parts. Read the instructions before

servicing double-insulated appliances. Use this hover blade

grass cutter only as described in this manual.

IMPORTANT!

Safety Instructions for Hover Blade

Grass Cutters

General Operation

• Read, understand, and follow all instructions on the

machine and in the manual(s) before starting.

• Do not put hands or feet near or under the machine.

Always stay clear of the discharge opening.

• Only responsible adults who are familiar with the

instructions should be allowed to operate this machine.

• Clear the work area of foreign objects such as rocks,

wire, toys, and other miscellaneous articles, which could

be picked up and thrown by the blades. Stay behind the

handle when the engine (motor) is running.

• Make sure that the work area is clear of bystanders before

starting the machine. Stop the machine if anyone enters

the area.

• Do not operate the machine while barefoot or while

wearing sandals. Always wear substantial footwear.

• Always look down and behind before and while moving

backward with the grass cutter.

• Never direct discharged material toward anyone. Avoid

discharging material against a wall or other obstruction.

• Never leave a running machine unattended.

• Stop the engine (motor) and wait until the blades come to

a complete stop before cleaning the machine, changing

accessories, and performing any other maintenance tasks.

• Operate the machine only in daylight or in good

articial light.

• Do not operate the machine when you are tired or under

the inuence of alcohol or drugs.

• Never operate the hover blade grass cutter in wet grass.

Always be sure of your footing; walk, never run, with the

hover blade grass cutter.

• If the machine should start to vibrate abnormally, stop

the engine (motor) and immediately check the machine

to ascertain the cause. Vibration is generally a signal of

trouble.

• Keep blades sharp.

• Keep hands and feet away from the cutting area.

• Always wear eye protection when operating the machine.

• Objects thrown by the hover blade grass cutter blade can

cause severe injuries. The work area should always be

carefully examined and cleared of all objects prior to each

cutting.

• Only use identical replacement blades.

Slope Operation

Slopes are major factors related to slip and fall accidents,

which can result in severe injury. Operation on all slopes

requires extra caution. If you feel uneasy on a slope, do not

mow it.

• Cut across the face of slopes; never cut slopes following

an up and down traverse. Exercise extreme caution when

changing direction on a slope.

• Watch for holes, ruts, bumps, rocks, or other hidden

objects. These may cause an unexpected slip or fall.

• on wet grass or excessively steep slopes. Do not cut

Poor footing could cause a slip and fall accident.

• Do not mow near drop os, ditches, or embankments.

You could lose your footing or balance.

Product specificaties

Merk:	Sun Joe
Categorie:	Grasmaaier
Model:	MJ-HVR12E

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe MJ-HVR12E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grasmaaier Sun Joe

Sun Joe SBJ803E Handleiding

24 Juni 2023

Sun Joe SJ-HDFC1 Handleiding

20 Juni 2023

Sun Joe BDL-A0046 Handleiding

3 Juni 2023

Sun Joe ION16LM-HYB-RM Handleiding

21 Mei 2023

Sun Joe MJ402E Handleiding

18 Mei 2023

Sun Joe AJ799E-RM Handleiding

8 Mei 2023

Sun Joe MJ24C-14 Handleiding

7 Mei 2023

Sun Joe MJ503M Handleiding

4 Mei 2023

Sun Joe MJ401E-PRO Handleiding

3 Mei 2023

Sun Joe MJ401C-PRO-RM Handleiding

25 April 2023

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Worx Landroid M700 Handleiding

3 December 2024

Worx Landroid L WR153E Handleiding

3 December 2024

Worx Landlord WG798E Handleiding

3 December 2024

Hecht 5654 Handleiding

2 December 2024

Gardenline GLVK 1401 Handleiding

30 November 2024

Gardenline GLM 1703 Handleiding

30 November 2024

Gardenline GLS 1401 Handleiding

30 November 2024

Gardenline GLVK 1402 Handleiding

30 November 2024

Gardenline GLM 1704 Handleiding

30 November 2024

Gardenline GLM 1700 Handleiding

30 November 2024