Sun Joe 24V-SSEG-LTE-RM Handleiding

Sun Joe Grastrimmer 24V-SSEG-LTE-RM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe 24V-SSEG-LTE-RM (20 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
® , LLC Model 24V-SSEG-LTE-RM Form No. SJ-24V-SSEG-LTE-RM-880E-M-V1
R
OPERATOR’S MANUAL
CORDLESS HEDGE TRIMMER
24-VOLT MAX* | 2.0 Ah | 7-INCH
1
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
® , LLC Model 24V-SSEG-LTE-RM Form No. SJ-24V-SSEG-LTE-RM-880E-M-V1
R
OPERATOR’S MANUAL
CORDLESS HEDGE TRIMMER
24-VOLT MAX* | 2.0 Ah | 7-INCH
2
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Retain this manual for future reference and reread it at the start
of each trimming season.
mWARNING! This battery-operated power tool must be
recharged only with the specic charging unit for the battery.
A charging unit that may be suitable for one type of battery
may create a risk of re when used with another battery type.
Avoid accidental starting.
When the tool is not in use, keep it away from other metal
objects.
Before operating the tool, read the entire manual carefully
and make sure you know how to switch the tool OFF in an
emergency.
Work Area Safety
1. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
The term “residual current device (RCD) ” may NOTE:
be replaced by the term “ground fault circuit interrupter
(GFCI) ” or “earth leakage circuit breaker (ELCB) ”.
7. Battery charger is for indoor use only. Only charge this
battery-powered tool indoors.
8. If the battery charger cable is damaged, please call the
Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
Personal Safety
1. Stay alert. Watch what you are doing and use common
sense when operating a power tool. Do not use the
power tool while you are tired or under the inuence of
drugs, alcohol or medication. A moment of inattention
while operating power tool may result in serious personal
injury.
2. Use personal protective equipment. Always wear eye
protection. Protective equipment such as safety glasses,
a dusk mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions, will reduce the
possibility of personal injuries.
3
3. Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
4. Remove any adjusting key or wrench before starting
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
Power Tool Use and Care
1. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not turn
it on and o. Any power tool that cannot be controlled by
the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may aect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
6. Keep cutting blades sharp and clean.
Properly maintained cutting blades with sharp edges are
less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
Battery Tool Use and Care
1. Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used with
another battery pack.
2. Use power tools only with specically designated
battery packs. Use of any other battery packs may create
a risk of injury and re.
3. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a re.
4. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
1. Have your power tool serviced by a qualied repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Hedge Trimmer Safety
Warnings
1. Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o
when clearing jammed material. Blades coast after
turn o. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the cutter
blade stopped. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
3. Hold the power tool by insulated gripping surfaces
only, because the cutting blade may contact hidden
wiring or its own cord. Cutting blades contacting a ″live
wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
4. DANGER – Keep hands away from blade(s). Contact with
blade(s) will result in serious personal injury.


Product specificaties

Merk: Sun Joe
Categorie: Grastrimmer
Model: 24V-SSEG-LTE-RM

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe 24V-SSEG-LTE-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Sun Joe

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Proviel

Proviel PVBS 32 Handleiding

19 November 2024
Proviel

Proviel PVBT 24 Handleiding

19 November 2024
Proviel

Proviel PVTA 18 Handleiding

19 November 2024
Proviel

Proviel PVT 53/2 Handleiding

19 November 2024
Proviel

Proviel PVT 527 Handleiding

19 November 2024
Proviel

Proviel PVT 325 Handleiding

19 November 2024
Anova

Anova D226 Handleiding

17 November 2024
Anova

Anova D546HXP Handleiding

17 November 2024
Sovereign

Sovereign SGT 26 Handleiding

16 November 2024