Stihl FS 450 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Stihl FS 450 (98 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/98
Warning!
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Advertencia!
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede
causar lesiones graves o mortales.
STIH)
1FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
BA_SE_081_009_01_07.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2008
0458 255 8621 A. M0.5. B8. Rei. Printed in Germany
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Approved Combinations of
Cutting Tool, Deflector,
Stop and Harness ........................... 18
Mounting the Bike Handle .............. 20
Adjusting the Throttle Cable ........... 21
Mounting the Deflectors
and Limit Stop ................................. 22
Mounting the Cutting Tools ............. 23
Fuel ................................................ 26
Fueling ............................................ 27
Fitting the Harness ......................... 27
Balancing the Machine ................... 28
Starting / Stopping the Engine ........ 28
Operating Instructions .................... 30
Cleaning the Air Filter ..................... 31
Cleaning the Air Filter ..................... 31
Motor Management ........................ 32
Adjusting the Carburetor ................ 32
Winter Operation ............................ 33
Electric Handle Heating ................. 34
Checking the Spark Plug ................ 34
Engine Running Behavior .............. 35
Lubricating the Gearbox ................. 36
Replacing the Starter
Rope and Rewind Spring ............... 36
Storing the Machine ....................... 38
Sharpening
Metal Cutting Tools ......................... 39
Maintenance Chart ......................... 40
Parts and Controls ......................... 42
Specifications ................................. 44
Special Accessories ....................... 45
Maintenance and Repairs .............. 45
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 46
Trademarks .................................... 48
Allow only persons who understand this
manual to operate your clearing saw.
To receive maximum performance and
satisfaction from your STIHL brush-
cutter, it is important that you read and
understand the maintenance and safety
precautions, starting on page 3, before
using your clearing saw.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a clearing saw is a high-speed
cutting tool some special safety pre-
cautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector, handle and harness for the
type of cutting attachment being used.
Always wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your clearing saw differs from
those described in this manual, please
contact your STIHL dealer for informa-
tion and assistance.
2
English / USA
FS 300, FS 350, FS 400, FS 450, FS 480
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
Guide to Using this Manual


Product specificaties

Merk: Stihl
Categorie: Grastrimmer
Model: FS 450

Heb je hulp nodig?

Als je hulp nodig hebt met Stihl FS 450 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Stihl

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Proviel

Proviel PVBS 32 Handleiding

19 November 2024
Proviel

Proviel PVBT 24 Handleiding

19 November 2024
Proviel

Proviel PVTA 18 Handleiding

19 November 2024
Proviel

Proviel PVT 53/2 Handleiding

19 November 2024
Proviel

Proviel PVT 527 Handleiding

19 November 2024
Proviel

Proviel PVT 325 Handleiding

19 November 2024
Anova

Anova D226 Handleiding

17 November 2024
Anova

Anova D546HXP Handleiding

17 November 2024
Sovereign

Sovereign SGT 26 Handleiding

16 November 2024