StarTech.com STDHVHDBT Handleiding

StarTech.com AV extender STDHVHDBT

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com STDHVHDBT (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1. Selected port LEDs

2. Input selection buttons

3. IR sensor

4. Function buttons

5. Status LED

6. Output buttons

Quick-start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 05/30/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/STDHVHDBT.

Packaging contents

• 1 x multi-input HDBaseT extender

• 1 x HDBaseT receiver

• 1 x IR remote control

• 1 x universal power adapter (NA/ EU/ UK / EU)

• 2 x mounting brackets

• 1 x RJ11-to-RS232 converter

• 1 x RJ11 cable

• 1 x RJ45 cable

• 8 x foot pads

• 1 x screw kit

• 1 x quick-start guide

Requirements

• 1 x local HDMI video display with cabling

• 1 x remote HDMI display with cabling

• 1 x DisplayPort video source with cabling

• 1 x VGA video source with cabling

• 2 x HDMI video sources with cabling

STDHVHDBT

Multi-Input HDBaseT Extender - 230 ft

*actual product may vary from photos

Preparing your site

1. Set up your local HDMI, DisplayPort and VGA video sources in

your desired local location.

2. Set up your remote display in your desired location.

Notes:

Make sure that the extender switch is located near an AC power

outlet.

Before installing the extender, make sure that all devices are

turned o.

Product overview

Transmitter front view

Transmitter rear view

1. DC 12V power port

2. (Control) RJ11 serial jack

3. IR Out/In ports

4. HDMI output port

5. HDBaseT output port

6. Audio In 3.5mm port (for VGA)

7. VGA input port

910

8. DP input port

9. HDMI 1 input port

10. HDMI 2 input port

11. Mode switch

12. Auto Inventory EDID switch

13. EDID COPY button

Installation

1. Connect each of your video sources to the input ports on the

video extender switch, using the required cabling (not included).

2. Connect an HDMI cable (not included) to your local HDMI display

and to the extender switch’s HDMI output port.

3. Connect the power adapter port on the extender switch to your

AC outlet using the power adapter, and press the power button to

power on the extender switch.

Download the full instruction manual at

www.StarTech.com/STDHVHDBT

Receiver front view Receiver rear view

1. HDMI output

2. Status LED

3. HDMI output

4. HDBaseT input port

5. Grounding bolt

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this

manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our

comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or

replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or

normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or

otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of

incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Basic Operation

EDID Settings

To ensure compatibility with all connected devices, please begin

operation by conrming the EDID switch is set to position 1. This

is the default setting, and will optimize all valid video outputs for

standard video and audio requirements. If you’re experiencing any

trouble, such as poor resolution support, or inconsistent audio or

video output, you can specify EDID settings or copy EDID settings

using this extender switch. For full EDID details, download the full

instruction manual at:

http://StarTech.com/STDHVHDBT.

Switching between video sources using switch mode

operation

1. Use the mode switch to the set the extender switch to position 1.

This will set the device to switch mode.

2. Press the input selection button that corresponds with your

desired video source.

3. The active selected port LEDs will light up, indicating which port

is selected, and your desired video source will appear on the

HDMI and HDBaseT displays.

4. Connect an RJ45 terminated CAT5e or CAT6 cable to the HDBaseT

output on the extender switch and to the HDBaseT input port on

the receiver.

Important Notes:

• Use only the receivers included with this kit. The included

HDBaseT receivers use 12V POC, mixing hardware with a

dierent HDBaseT kit can damage your equipment.

• Do not route the cable through any networking equipment.

5. Power up each of your devices. The image from your video source

will now appear on your remote display.

4. (Optional for serial control) Connect the the RJ11 cable (included)

to the (Control) RJ11 serial jack on the extender switch and to the

RJ11-to-RS232 serial converter. Then connect a 9-pin serial cable

(not included) to the RJ11-to-RS232 converter and to 9-pin serial

connector on your computer. For RS232 operation instructions

please download the full product manual at:

http://www.StarTech.com/STDHVHDBT

Manual operation with remote control

1. Press buttons 1 through 4 on the right side of the IR remote

control to switch between the HDMI #1, HDMI#2, DisplayPort,

and VGA ports respectively.

2. The active selected port LEDs will light up on the extender

switch, indicating which port is selected, and your desired video

source will appear on the HDMI and HDBaseT displays.

Note: The resolution performance of this extender switch will vary

depending on the length of your cabling. Please review the chart

below to determine the best solution for your setup. For best results,

StarTech.com recommends shielded CAT6 cable.

Distance Maximum resolution

35 m (115 ft.) or less 4K x 2K at 30 Hz

Up to 70 m (230 ft.) 1080p at 60 Hz

Note: This converter switch features multiple operating modes.

To review the description and operating steps for each mode,

download the full instruction manual at:

http://www.StarTech.com/STDHVHDBT.

Product specificaties

Merk:	StarTech.com
Categorie:	AV extender
Model:	STDHVHDBT
Kleur van het product:	Zwart
Gewicht:	918 g
Breedte:	160 mm
Diepte:	100 mm
Hoogte:	40 mm
Type stekker:	Type M
Gewicht verpakking:	1682 g
Breedte verpakking:	205 mm
Diepte verpakking:	298 mm
Hoogte verpakking:	62 mm
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
Stroom:	0.6 A
Montage gereedschap:	Ja
Afstandsbediening:	IrDA
Ondersteunde video-modi:	720p, 1080p, 2160p
Maximum resolutie:	4096 x 2160 Pixels
Meegeleverde kabels:	LAN (RJ-45), Phone (RJ-11)
Audiosysteem:	Multikanaal
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Certificering:	CE, FCC, REACH, TAA
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
Remote (IR) ingang:	1
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
VGA (D-Sub) invoer ports:	1
DisplayPorts in:	1
Temperatuur bij opslag:	-10 - 60 °C
Externe adapter:	Ja
Rack-montage:	Ja
Audio-uitgangskanalen:	7.1 kanalen
HDBaseT-gecertificeerd:	Ja
Output current:	1.5 A
Remote (IR) uitgang:	1
HDMI in:	2
RJ-45 uitgang ports:	1
Montagebeugels meegeleverd:	Ja
Aantal HDMI-uitgangen:	2
RJ-45 invoer ports:	1
Rubberen voetjes:	Ja
Operating voltage:	12 V
Afstandsbediening inbegrepen:	Ja
(Buitenste) hoofdverpakking hoogte:	262 mm
(Buitenste) hoofdverpakking breedte:	322 mm
(Buitenste) hoofdverpakking lengte:	406 mm
Hoeveelheid per (buitenste) hoofdverpakking:	6 stuk(s)
Maximaal bereik:	70 m
AC-ingangsspanning:	100 - 240 V
Stroomverbruik (typisch):	18 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Ondersteundende kabel types:	Cat5e, Cat6
3,5 mm in:	Ja
Inbegrepen soorten voedingsstekkers:	ANZ, EU, NA, UK
Doorgelust:	Nee
Audio support:	Ja