StarTech.com ST124HDBT Handleiding

StarTech.com AV extender ST124HDBT

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com ST124HDBT (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision:02/10/11

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST124HDBT

Packaging contents

• 1 x 3-port HDBaseT extender

• 3 x HDBaseT receivers

• 1 x universal power adapter (NA / EU / UK / AU)

• 4 x IR blasters

• 4 x IR receiver

• 1 x quick-start guide

Requirements

• 1 x HDMI video source with cabling

• 1 x local HDMI display with cabling

• 3 x remote HDMI displays with cabling

• 3 x CAT5e, CAT6, or CAT7 cables, each with enough length to reach

from your video source to the location of each display

ST124HDBT

3-Port HDBaseT Extender Kit - Up to 4K

*actual product may vary from photos

Preparing your site

1. Set up your local HDMI video source in your desired location.

2. Set up your local HDMI display in the same location as your video

source.

3. Set up each of your remote displays in your desired locations.

Notes:

• Please ensure the extender is situated near an available USB

power source.

• Make sure all devices are turned o before you begin the

installation.

Product overview

Transmitter front view

Transmitter rear view

1. HDMI IN port

2. SYNC LED

3. HDMI OUT port - output #4

4. LINK LED

5. EDID switch

6. SERVICE USB port

7. POWER LED

8. DC 24V power port

1. IR IN port

2. IR OUT port

3. CAT5e/6/7 OUT port - output #1

4. CAT5e/6/7 OUT port - output #2

5. CAT5e/6/7 OUT port - output #3

Installing the extender

1. Position the extender near your video source.

2. Connect an HDMI cable (not included) to the port on the HDMI IN

extender and to the HDMI output port on your source device.

3. Connect an HDMI cable (not included) to the port HDMI OUT

on the extender and to the HDMI input port on your local HDMI

display.

4. Connect the power adapter (included) to the power port DC 24V

on the extender and to an AC power outlet.

5. Connect a CAT5e, CAT6 or CAT7 cable (not included) to each of

the three CAT5e/6/7 OUT ports on the extender, and run each

cable to the location of your remote displays.

Important Notes:

• Use only the receivers included with this kit. The included

HDBaseT receivers use 24V POC, mixing hardware with a

dierent HDBaseT kit can damage your equipment.

• Do not route the cables through any networking equipment.

• Your remote display with the lowest capabilities should be

routed to output #1.

6. Position the receivers near each of your remote displays.

7. Connect each of the CAT5e, CAT6 or CAT7 cables (not included)

to the CAT5e/6/7 IN ports on your remote HDBaseT displays or

receivers.

5 6 7

Receiver front view Receiver rear view

1. POWER LED

2. LINK LED

3. CAT5e/6/7 IN

4. Serial port (not in use)

5. IR IN port

6. IR OUT port

7. HDMI OUT port

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

8. Connect an HDMI cable (not included) to the port HDMI OUT

on each of the receivers and on the HDMI input on each of your

remote HDMI displays.

9. Power up your local display and each of your remote devices. The

image from your video source will now appear on each of your

displays. Setting the EDID operating mode

When a video source is connected to a display, EDID information

is shared between devices, enabling the source to know which

resolution and audio specication the display supports. However,

because this extender can be connected to four dierent displays,

each with potentially dierent EDID information, the best EDID

information that can be supported by all attached monitors must be

dened.

To maximize compatibility with your displays, this extender features

two dierent EDID modes. Please review the description of each

mode in this section, to determine which mode is optimal for your

setup. Then use the mode switch, to set the video extender to EDID

your desired mode.

STD mode (standard)

STD mode congures all EDID settings for a resolution of 1920x1080

at 60 Hz and an audio specication of 2-channel stereo. This mode is

ideal for most HD displays, and is the default setting of the extender.

TV mode

TV mode congures all of your displays to the EDID settings of the

display connected to the CAT5e/6/7 OUT port - output #1 port. This

mode is ideal for displays with high resolution support, such as 4K

monitors, or surround sound congurations with 5.1 or 7.1 audio

specications.

Note: In TV mode, it’s important to ensure the other connected

displays can support the same maximum resolution as the display

connected that’s connected to the CAT5e/6/7 OUT port - output #1

port.

Note: The resolution performance of this extender will vary

depending on the length of your network cabling. Please review the

chart below to determine the best solution for your setup. For best

results, StarTech.com recommends shielded CAT6 cable.

Distance Maximum resolution

35 m (115 ft.) or less 4K x 2K at 30 Hz

Up to 70 m (230 ft.) 1080p at 60 Hz

LED indicators

The extender has three green LED indicators that light up to notify

you of the extender’s status. Please review the table below to

interpret the LED activity on the receiver.

LED Status

Sync Lights up when the port on the receiver HDMI IN

has an active source connected.

Link Lights up when the extender and receiver are

actively connected to each other.

Power Lights up when extender or receiver has power

connected.

Product specificaties

Merk:	StarTech.com
Categorie:	AV extender
Model:	ST124HDBT
Gewicht:	1000 g
Breedte:	145 mm
Diepte:	200 mm
Hoogte:	30 mm
Gewicht verpakking:	2600 g
Breedte verpakking:	299 mm
Diepte verpakking:	363 mm
Hoogte verpakking:	98 mm
Soort:	AV-zender & ontvanger
LED-indicatoren:	Link, Power
Stroom:	1.5 A
Ondersteunde video-modi:	720p, 1080p, 2160p
Maximum resolutie:	4096 x 2160 Pixels
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Land van herkomst:	Taiwan
Certificering:	CE, FCC, TAA
Maximale refresh snelheid:	30 Hz
Aansluiting voor netstroomadapter:	Ja
Ondersteunde grafische resoluties:	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 4096 x 2160
Remote (IR) ingang:	1
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-10 - 60 °C
Rack-montage:	Ja
Output current:	2.7 A
Remote (IR) uitgang:	1
HDMI in:	1
RJ-45 uitgang ports:	3
Aantal HDMI-uitgangen:	4
RJ-45 invoer ports:	3
Operating voltage:	24 V
(Buitenste) hoofdverpakking hoogte:	319 mm
(Buitenste) hoofdverpakking breedte:	374 mm
(Buitenste) hoofdverpakking lengte:	510 mm
Hoeveelheid per (buitenste) hoofdverpakking:	5 stuk(s)
Maximaal bereik:	70 m
AC-ingangsspanning:	100 - 240 V
Stroomverbruik (typisch):	64.8 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
HDCP- & EDID-omzeiling:	Ja
Ondersteundende kabel types:	Cat5e, Cat6, Cat7
Inbegrepen soorten voedingsstekkers:	AU, EU, NA, UK
Inclusief IR-versterker:	Ja
Inclusief IR-ontvanger:	Ja
Doorgelust:	Ja
Audio support:	Ja