StarTech.com ST121WHDLR Handleiding

StarTech.com AV extender ST121WHDLR

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com ST121WHDLR (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 11, 2019 11:05 AM

Product Diagram (ST121WHDLR)

Note: The above image represents both and . The ports are Transmitter Receiver

located in the same position on both the and .Transmitter Receiver

Port/Button/LED/Part Function

Transmitter

1Pairing/Channel

Button

• Used to pair devices to the Pairing: Wireless

Transmitter.

Note: Press and hold for 5 seconds.

• For better transmission, use the Channel: Channel

Button to use another channel.

2Network LED • Solid red indicates that the network is connected.

3Video LED • Solid blue indicates that the is Display Device

connected.

4IR OUT Port • Connect an to transmit an IR signal.IR Blaster

HDMI over Wireless Extender |1080p | 200 m

5USB Port

• Used for rmware updates.

Note: For future rmware updates refer to the

rmware section on the Product Support tab www.

startech.com/ST121WHDLR.

6DC 5V Port • Powers the .Wireless Extender

7 HDMI IN Port • Connects the to the Video Source Device

Wireless Extender.

8IR Blaster • Used to transmit an infrared signal.

Receiver

1Pairing/Channel

Button

• Used to pair devices to the Wireless Pairing:

Receiver.

Note: Press and hold for 5 seconds.

• For better transmission, use the Channel: Channel

Button to use another channel.

2Network LED • Solid red indicates that the network is connected.

3Video LED • Solid blue indicates that the is Display Device

connected.

4IR IN Port • Connect an to receive an IR signal.IR Receiver

5USB Port

• Used for rmware updates

Note: For future rmware updates refer to the

rmware section on the Product Support tab www.

startech.com/ST121WHDLR.

6DC 5V Port • Powers the .Wireless Extender

7HDMI OUT Port • Connects the to the Display Device Wireless

Extender.

8IR Receiver • Used to receive an infrared signal.

Requirements

For the latest requirements, please visit .www.startech.com/ST121WHDLR

2 3

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

FCC ID: Y3H706120181227

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

IC ID: 11232A-7061

IC Radiation Exposure Statement

This equipment complies with IC RSS-247 radiation exposure limit set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 0.5cm

between the radiator and your body.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Notes: The maximum distance between the transmitter and the receiver is 600 ft. If

the wireless signal is obstructed by walls, or other interference the signal quality and

maximum distance will likely be reduced.

When extending infrared, this product can only support an IR signal in the 38kHz

carrier frequency.

Mounting the Transmitter/Receiver

The can be mounted using the included.Transmitter/Receiver Mounting Hardware

1. Align the with the on the back of the Mounting Hardware Mounting Hole

Transmitter/Receiver.

2. Screw the into the , being careful not to Mounting Hardware Mounting Hole

overtighten.

3. Loosen the on the .Adjustment Knob Mounting Hardware

4. Adjust the position the is facing.Transmitter/Receiver

5. Tighten the on the when the Adjustment Knob Mouting Hardware Transmitter/

Receiver is in the desired position.

LED Indicators

LED Display Function

HDMI

Transmitter

and

HDMI

Receiver

Network Solid Power is connected to the

Transmitter.

Slowly ashing red Connecting to a .Device

Video Solid Video transmission active.

Slowing ashing blue No video signal input.

Network &

Video

Flashes Indicates the Receiver is pairing.

Alternate ashing

(ash, pause, ash)

Channel switching in active.

Connecting the Extender

1. Position the near the (e.g. Computer, Wireless Transmitter Video Source Device

Blu-ray Player).

2. Connect an (sold separately) to the on the HDMI Cable HDMI IN Port Wireless

Transmitter Video Output Port Video Source Device and to the on the .

3. (Optional) Connect the to the on the , IR Blaster IR Out Port Wireless Transmitter

and position the directly in front of the IR sensor on your IR Blaster Video Source

Device.

Note: Check the manual of your for the IR sensor location.Video Source Device

4. Connect the to the on the Universal Power Adapter DC 5V Port Wireless

Transmitter AC Electrical Outlet and to an .

5. Position the near your (e.g. Television, Projector).Wireless Receiver Display Device

6. Connect an to the on the and to HDMI Cable HDMI Output Port Wireless Receiver

an HDMI port on the .Display Device

7. (Optional) Connect the to the on the , and IR Receiver IR In Port Wireless Receiver

position the in the area you would like to point your IR controller.IR Receiver

8. Connect the to the on the Universal Power Adapter DC 5V Port Wireless Receiver

and to an .AC Electrical Outlet

Product specificaties

Merk:	StarTech.com
Categorie:	AV extender
Model:	ST121WHDLR
Kleur van het product:	Zwart
Gewicht:	236 g
Breedte:	64 mm
Diepte:	110 mm
Hoogte:	25 mm
Gewicht verpakking:	1100 g
Breedte verpakking:	200 mm
Diepte verpakking:	260 mm
Hoogte verpakking:	90 mm
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
Montage gereedschap:	Ja
USB-connectortype:	Mini-USB B
Connectiviteitstechnologie:	Draadloos
Ondersteunde video-modi:	480p, 720p, 1080i, 1080p
Maximum resolutie:	1920 x 1080 Pixels
Meegeleverde kabels:	HDMI
Snelstartgids:	Ja
Aantal USB-aansluitingen:	2
Certificering:	REACH, CE, FCC
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Kunststof
Ondersteunde grafische resoluties:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1920 x 1080 (HD 1080)
Remote (IR) ingang:	1
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-20 - 80 °C
Output current:	2 A
Remote (IR) uitgang:	1
HDMI in:	1
Aantal HDMI-uitgangen:	1
Operating voltage:	5 V
Maximaal bereik:	200 m
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	25 - 60 procent
Inbegrepen soorten voedingsstekkers:	EU, NA, UK
Inclusief IR-versterker:	Ja
Inclusief IR-ontvanger:	Ja