StarTech.com POEEXT1GAT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com POEEXT1GAT (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 02/25/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
1x Gigabit Power over Ethernet Extender
1x Instruction Manual
System Requirements
RJ45 terminated CAT5 or higher Ethernet cabling (“Solid” UTP cable
recommended)
10/100/1000 Mbps compatible Power over Ethernet network and/or
devices (PoE/PoE+)
PoE devices must comply with IEEE 802.3at or 802.3af standards
Note: Total extension distances can often be shorter due to power
delivery voltage-drop on the connected cables. Maximum distances can
vary based on the quality of the UTP cables and the environment.
Product Overview
Input Side
Output Side
POEEXT1GAT
Gigabit Power over Ethernet Extender 802.3at / 802.3af - 330ft (100m)
LEDs
10/100/1000
PoE+ RJ45
Input Port
10/100/1000
PoE+ RJ45
Output Port
LED Indicators
LED Indication
PoE IN (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PSE is
connected)
Port Function
IN Port (Input)
Connect the PoE IN port from a
802.3at / 802.3af Power Sourcing
Equipment (PSE) device through CAT5
or higher Ethernet cabling:
PoE injector
PoE injector hub
PoE switch
Another POEEXT1GAT in a daisy
chain conguration
OUT Port (Output)
Connect the PoE OUT port to a 802.3at
/ 802.3af PoE powered device (PD)
through CAT5 or higher Ethernet
cabling:
PoE camera
PoE wireless access point
PoE splitter
Another POEEXT1GAT in a daisy
chain conguration
Installation
The PoE Extender supports 10Mbps, 100Mbps and 1000Mbps network
speeds and will automatically detect the speed of the incoming
connection.
Before installation, check your network infrastructure. If there are any
IEEE 802.3at / 802.3af devices that require power, the PoE Extender
can provide power and data Ethernet connectivity conveniently, and
easily.
The PoE Extender should be installed between the PSE (Power Source
Equipment) and the PD (Powered Device). It is powered by PSE and
forwards the Ethernet data and remaining PoE power to the PD.
The PoE extender does not require an external power supply and
will inject power to the PDs without aecting data transmission
throughput.
Port Connections
There are two RJ45 ports on the PoE Extender. The IN port functions
as “PoE (Data and Power) input” and the “OUT port functions as “PoE
(Data and Power) output”.
LNK/ACT (Green)
Solid: Indicates that a port link is
established (PSE link is detected)
Blinking: Indicates that the PoE
Extender is actively sending or
receiving data over the IN port
(activity)
PoE OUT (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PD is
connected)
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the users authority to operate the equipment.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (A)/NMB-3(A)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Multiple Unit Installation
The PoE Extender supports multiple units in a daisy chain
conguration. They can be connected in series to extend power and
Ethernet data connectivity to your remote PoE powered devices at
longer distances.
1. Using RJ45 cable, connect the “OUT” port on the rst PoE Extender
unit to the “IN” port on the second PoE Extender unit.
2. The “PoE OUT” LED on the rst PoE Extender unit should light up
solid to show it is providing power to the second PoE Extender unit.
3. The “PoE IN LED on the second PoE Extender unit should also
light up solid to show it is receiving power from the rst PoE
Extender unit.
4. Using RJ45 cable, connect your remote PoE powered device to the
“OUT” port on the second PoE Extender Unit, or connect to a third
PoE Extender unit.
Note: You may daisy chain up to 4 PoE Extender units total to a
maximum of 500m (the 4th unit will supply IEEE 802.3af up to 12W
output).
Single Unit Installation
1. Using RJ45 cable, connect your Power Sourcing Equipment (PSE)
device to the “IN” port on the PoE Extender. The “PoE IN LED
should light up solid.
2. Using RJ45 cable, connect your PoE Powered Device (PD) to the
“OUT” port on the PoE Extender. The “PoE OUT” LED should light
up solid.
Note: According to the IEEE 802.3at / 802.3af standard, the PoE
Extender will not inject power to the connected RJ45 cable if not
connected to a standard IEEE 802.3at / 802.3af device.
Each PoE Extender unit requires ~3.2 Watts maximum to power
the unit itself. Check the total power consumption of your devices
and the PoE Extender units before setting up in a daisy chain
conguration. If the overall power consumption is overloaded, the
local PSE could shut-down the entire power system.
Each cable segment is limited in 100m using standard RJ45
terminated CAT5 or higher Ethernet cable. Any other non-standard
cable or distances above 100m could result in unstable connections.
Wall-Mounting
The PoE Extender features two mounting holes on the bottom side
of the unit. The mounting holes provide the option to wall-mount
the PoE Extender as desired.
Refer to the diagram below for the maximum supported power
output at each distance.


Product specificaties

Merk: StarTech.com
Categorie: Wifi-repeater
Model: POEEXT1GAT
Kleur van het product: Zwart
Gewicht: 193 g
Breedte: 69 mm
Diepte: 94 mm
Hoogte: 25 mm
Gewicht verpakking: 343 g
Breedte verpakking: 135 mm
Diepte verpakking: 205 mm
Hoogte verpakking: 70 mm
Soort: Netwerkrepeater
Gebruikershandleiding: Ja
Materiaal behuizing: Staal
LED-indicatoren: Activity, Link, PoE
Vermogensverbruik (max): 3.2 W
Certificering: CE, FCC, TAA, REACH
Duurzaamheidscertificaten: RoHS
Plug and play: Ja
Bekabelingstechnologie: 10/100/1000Base-T(X)
Netwerkstandaard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag: -10 - 85 °C
Mean time between failures (MTBF): 50000 uur
Power over Ethernet (PoE): Ja
Jumbo Frames ondersteuning: Nee
Maximaal bereik: 100 m
Overdrachtssnelheid: 2000 Mbit/s
Auto MDIX IEEE: Ja
Auto-negotiation: Ja
AC-ingangsspanning: 52 - 56 V
Bedrijfstemperatuur (T-T): 0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
Code geharmoniseerd systeem (HS): 85176990
Hoeveelheid Power over Ethernet (PoE) ports: 2
Duplex systeem: Full, Half

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com POEEXT1GAT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wifi-repeater StarTech.com

Handleiding Wifi-repeater

Nieuwste handleidingen voor Wifi-repeater