StarTech.com LTULOCKKEY Handleiding

StarTech.com slot LTULOCKKEY

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com LTULOCKKEY (2 pagina's) in de categorie slot. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 27, 2019 2:49 PM

Product Diagram (LTULOCKKEY)

Components Function

1Adapter Slot • Used to house the Adapter.

2Keyhole • Used to lock and unlock the from a Lock Lock

Slot.

3Key • Used to lock or unlock the .Keyed Laptop Lock

4Security Cable • Used to secure a to a secure stationary Device

object.

5Locking Hook • Used to connect the to a Lock Lock Port.

6Adapter

• Used to change the Lock head to

accommodate dierent lock slots.

• = 3x7 mm slotStandard Slot

• = 3.2x4.5 mm slotWedge Slot

• = 2.5x6 mm slotNano Slot

Universal Keyed Laptop Lock | Pivot and Rotate Hinge

Requirements

For the latest requirements, please visit www.startech.com/LTULOCKKEY

Installing a Lock Adapter

1. Select the that ts the on the you are securing.Adapter Lock Slot Device

2. With the in an unlocked state, insert the into the on the Lock Adapter Adapter Slot

Lock Lock Adapter Adapter , making sure that the is pushed all the way into the

Slot Lock and ush with the .

Note: The does not lock into the until the is inserted into Adapter Adapter Slot Lock

a and the is engaged (pressed).Lock Slot Lock Button

Securing a Device

Using the Key

1. Wrap the around a secure stationary object and pull the Security Cable Keyed

Laptop Lock Security Cable through the loop on the .

Security Cable

2. Insert the into the . Push and turn the counter-clockwise until the Key Lock Key

lock mechanism disengages the on a or other Lock Slot Laptop, Docking Station,

compatible . Device

3. Remove the from the Key Lock.

Using the Push-to-Lock Function

Note: In order to use this function the lock must be in the unlocked state.

1. Insert the into a on the .Locking Hook Lock Slot Device

2. Push the button (key hole) to engage the locking mechanism.Lock

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Unlocking a Device

1. Insert the into the . Push and turn the clockwise to disengage the lock Key Lock Key

mechanism from the Lock Slot.

2. Gently pull the out of the Lock Lock Slot.

3. Turn the a quarter turn counter-clockwise and remove it from the .Key Lock

Removing a Lock Adapter

1. Using the unlock the and remove it from the .Key, Keyed Laptop Lock Device

2. With the unlocked, pull the out of the .Keyed Laptop Lock Adapter Adapter Slot

Product specificaties

Merk:	StarTech.com
Categorie:	slot
Model:	LTULOCKKEY
Kleur van het product:	Black, Stainless steel
Gewicht:	130 g
Breedte:	26.6 mm
Hoogte:	12 mm
Snoerlengte:	2 m
Gewicht verpakking:	135 g
Breedte verpakking:	124 mm
Diepte verpakking:	220 mm
Hoogte verpakking:	17 mm
Kabelslot sleuf type:	Kensington
Certificering:	TAA, RoHS
Aantal toetsen:	2 toetsen
Beste gebruik:	Notebook
(Buitenste) hoofdverpakking hoogte:	260 mm
(Buitenste) hoofdverpakking breedte:	245 mm
(Buitenste) hoofdverpakking lengte:	510 mm
Hoeveelheid per (buitenste) hoofdverpakking:	50 stuk(s)
Code geharmoniseerd systeem (HS):	83014090
Slot type:	2 toetsen
Type beveiligingssleufanker:	Nano, Wedge-shaped