StarTech.com LTULOCK4D Handleiding

StarTech.com slot LTULOCK4D

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com LTULOCK4D (2 pagina's) in de categorie slot. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 30, 2019 4:34 PM

Product Diagram (LTULOCK4D)

Components Function

1Security Cable • Used to secure a to a secure stationary Device

object.

2Bumper Spacers • Prevents the from scratching the Lock

connected Device.

3Locking Hook • Used to connect the to a Lock Lock Slot.

4Adapter

• Used to change the Lock head to

accommodate dierent lock slots.

• = 3x7 mm slotStandard Slot

• = 3.2x4.5 mm slotWedge Slot

• = 2.5x6 mm slotNano Slot

5Adapter Slot • Used to house the Adapter.

6Guide Line

• Used to enter a combination on the . Dials

• Align the combination digits with the Guide

Line.

Universal 4-Digit Combination Laptop Lock | Pivot and Rotate Hinge

7Release Button

• Used to release the from the .Lock Lock Slot

8Dials • Used to enter the combination.Lock’s

9Reset Screw

• Used to set a new combination.

Note: Once the combination is changed, if you

lose the new combination you will not be able to

reset the combination.

Requirements

For the latest requirements, please visit www.startech.com/LTULOCK4D.

• = 0-0-0-0Default Combination

Setting a New Combination

1. Align the numbers on the with the using the default combination Dial Guide Line

0-0-0-0.

2. Insert a (sold separately) into the and push the Flathead Screwdriver Reset Screw

Reset Screw Lock in toward the .

3. With the pushed in, turn the clockwise 90 degrees. Reset Screw Reset Screw

4. Rotate each of the to the desired number.Dials

5. Insert the into the and turn the Flathead Screwdriver Reset Screw Reset Screw

counter-clockwise 90 degrees, moving the back to its original position. Reset Screw

The will pop back out when it is in the original position.Reset Screw

Note: Be sure to write down the new combination and keep it in a secure location

away from the lock.

6. To set a new combination follow steps 1 - 5 using the new combination set up in

Step 4 instead of the default combination.

Installing a Lock Adapter

1. Select the that ts the on the you are trying to secure.Adapter Lock Slot Device

2. While pressing the button, insert the into the on the Release Adapter Adapter Slot

Lock Lock Adapter Adapter , making sure that the is pushed all the way into the

Slot Lock and ush with the .

3 4 5

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Unlocking a Device

1. Enter the new combination that was created in the Setting a New Combination

section.

2. Press and hold the . The locking mechanism will disengage from the Release Button

Lock Slot Device on the .

3. Pull the out of the and release the Button.Lock Lock Slot Release

Removing a Lock Adapter

• While pressing the button, remove the from the .Release Adapter Adapter Slot

Locking a Device

1. Wrap the around a secure stationary object and pull the through Security Cable Lock

the loop on the .Security Cable

Security Cable

2. Press and hold the and insert the into the Release Button Locking Hooks Lock Slot

on a or any other compatible .Laptop, Docking Station, Device

3. Release the to engage the lock and rotate the .Release Button Dials

Product specificaties

Merk:	StarTech.com
Categorie:	slot
Model:	LTULOCK4D
Kleur van het product:	Zwart, zilver
Gewicht:	155 g
Breedte:	49.6 mm
Hoogte:	16 mm
Snoerlengte:	2 m
Gewicht verpakking:	160 g
Breedte verpakking:	128 mm
Diepte verpakking:	220 mm
Hoogte verpakking:	50 mm
Gebruikershandleiding:	Ja
Kabelslot sleuf type:	Kensington
Duurzaamheidscertificaten:	RoHS, CE
Beste gebruik:	Universeel
(Buitenste) hoofdverpakking hoogte:	260 mm
(Buitenste) hoofdverpakking breedte:	240 mm
(Buitenste) hoofdverpakking lengte:	510 mm
Hoeveelheid per (buitenste) hoofdverpakking:	50 stuk(s)
Code geharmoniseerd systeem (HS):	83014090
Slot type:	Combinatieslot
Aantal combinaties:	10000