StarTech.com LTLOCK4D Handleiding

StarTech.com slot LTLOCK4D

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com LTLOCK4D (2 pagina's) in de categorie slot. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (LTLOCK4D)
Components Function
1Security Cable Used to secure a to a secure stationary Device
object.
2Bumper Spacers Prevents the from scratching the Lock
connected Device.
3Locking Hook Used to connect the to a Lock Lock Slot.
4Release Button Used to release the from the .Lock Lock Slot
5Dials Used to enter the combination.Lock’s
6Guide Line
Used to enter a combination on the . Dials
Align the combination digits with the Guide
Line.
7Reset Screw
Used to set a new combination.
Note: Once the combination is changed, if you
lose the new combination you will not be able to
reset the combination.
4-Digit Combination Laptop Lock
1
Requirements
For the latest requirements, please visit www.startech.com/LTLOCK4D.
= 0-0-0-0Default Combination
Setting a New Combination
1. Align the numbers on the with the using the default combination Dial Guide Line
0-0-0-0.
2. Insert a (sold separately) into the and push the Flathead Screwdriver Reset Screw
Reset Screw Lock in toward the .
3. With the pushed in, turn the clockwise 90 degrees. Reset Screw Reset Screw
4. Rotate each of the to the desired number.Dials
5. Insert the into the and turn the Flathead Screwdriver Reset Screw Reset Screw
counter-clockwise 90 degrees moving the , back to its original position. Reset Screw
The will pop back out once it is in the original position.Reset Screw
Note: Be sure to write down the new combination and keep it in a secure location
away from the lock.
6. To set a new combination follow steps 1 - 5 using the new combination set up in
Step 4 instead of the default combination.
Locking a Device
1. Wrap the around a secure stationary object and pull the Security Cable Lock
through the loop on the .Security Cable
Security Cable
2. Press and hold the and insert the into the Release Button Locking Hooks Lock Slot
on a or any other compatible .Laptop, Docking Station, Device
2
3
4
5
6
7
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
If product has an exposed circuit board, do not touch the product under power.
Mesures de sécuri
Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください
Misure di sicurezza
Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
3. Release the to engage the lock and rotate the .Release Button Dials
Unlocking a Device
1. Enter the new combination that was created in the Setting a New Combination
section.
2. Press and hold the . The locking mechanism will disengage from the Release Button
Lock Slot Device on the .
3. Pull the out of the .Lock Lock Slot


Product specificaties

Merk: StarTech.com
Categorie: slot
Model: LTLOCK4D
Kleur van het product: Zwart, zilver
Gewicht: 128 g
Breedte: 55.1 mm
Hoogte: 16 mm
Snoerlengte: 2 m
Breedte verpakking: 130 mm
Diepte verpakking: 220 mm
Hoogte verpakking: - mm
Gebruikershandleiding: Ja
Met slot: Ja
Materiaal: Zink staal
Duurzaamheidscertificaten: CE, RoHS
Aantal per verpakking: 1 stuk(s)
Beste gebruik: Notebook
(Buitenste) hoofdverpakking hoogte: 235 mm
(Buitenste) hoofdverpakking breedte: 300 mm
(Buitenste) hoofdverpakking lengte: 325 mm
Hoeveelheid per (buitenste) hoofdverpakking: 40 stuk(s)
Code geharmoniseerd systeem (HS): 83014090
Slot type: Combinatieslot

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com LTLOCK4D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding slot StarTech.com

Handleiding slot

Nieuwste handleidingen voor slot