StarTech.com HB31C3A1CME Handleiding

StarTech.com USB Hub HB31C3A1CME

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com HB31C3A1CME (2 pagina's) in de categorie USB Hub. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 2, 2020

Product Diagram (HB31C3A1CME)

Front View

Rear View

Port Function

1USB-C Port

• SuperSpeed USB 10Gbps (USB 3.2 Gen 2)

• Supports USB BC 1.2 charging

• Supports surge and 15KV ESD (Electrostatic

Discharge) protection

• Connect to the USB-C Peripheral Devices Hub

2USB-A Ports (x 3)

• SuperSpeed USB 10Gbps (USB 3.2 Gen 2)

• Used to connect ( x 3) to USB-A Peripheral Devices

the .Hub

• Supports USB BC 1.2 charging

• Supports surge and 15KV ESD (Electrostatic

Discharge) protection

3Mounting Holes • Wall mount the Hub

• Mount the to the side/underside of a Hub Desk

4USB-C Host Port • SuperSpeed USB 10Gbps (USB 3.2 Gen 2)

• Connect the to a Hub Host Computer

52-Wire Terminal Block • Connect an external (+7 - 24V DC DC Power Source

Input) to the Hub

6Power Input Port • Connect a to power the DC 12V Power Source Hub

4-Port Industrial USB-C™ 10Gbps Hub - 3x USB-A + 1 USB-C - ESD + Surge Protection

Package Contents

• USB Hub x 1

• Universal Power Adapter (NA, JP, UK, EU, ANZ) x 1

• Terminal Block Connector x 1

• USB Type-C to Type-C Cable x 1

• USB Type-C to Type-A Cable x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit:

www.startech.com/HB31C3A1CME.

• Mounting Screws (x 2)

Tools

• Phillips or Flat Head Screwdriver

• Writing Utensil

• Level

Installation

Warning: Connect the after all the other installation steps Universal Power Adapter

have been completed.

Notes: There are two ways to power the . Hub

It is recommended to use an external or a DC Power Source Terminal Block Power

Source (+7 - 24V DC) 2-Wire Terminal Block connected to the to ensure full and

stable function.

Connect the USB Ports

1. Connect a (included) to the on theUSB Type-C to Type-C Cable USB-C Host Port

rear of the and to a on the . Hub USB-C Port Host Computer

2. The should detect the and automatically Host Computer’s Operating System Hub

install it.

3. Connect the to the and the (x3) USB Peripheral Devices USB-C Port USB-A Ports

on the front of the .Hub

Power the Hub

Power the Hub Using the 2-Wire Terminal Block

1. Remove the from the rear of the .Terminal Block Connector Housing Hub’s Casing

4 5 63 3

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

Wall Mounting

Note: It is recommended that are used when wall mounting this . Wall Studs Hub

1. Hold the in the desired mounting location. Hub

2. Mark the location of the , using a . Mounting Holes Writing Utensil

3. Draw a line connecting the two , using a .Mounting Holes Level

4. Hold the in the desired mounting location, aligning the on Hub Mounting Holes

the sides of the with the created in step 2. Hub Mounting Hole Marks

5. Insert the (x 2) through the and into the Mounting Screws Wall Mounting Holes

Wall.

6. Tighten the until the is securely fasten to the , using a Mounting Screws Hub Wall

Phillips Head Screwdriver.

2. Loosen the screws for the on the , using a Terminals Terminal Block Connector

Phillips or Flat Head Screwdriver.

3. Connect the and from the (+7 - 24V DC) to Power Ground Wires DC Power Source

the on the , the are marked on theTerminals Terminal Block Connector Terminals

Hub’s Casing.

Note: Ensure the polarity of the input power is correctly matched with the Terminal

Block Pins to ensure proper function.

Terminal Block Pins

4. Insert the back into the rear of the .Terminal Block Connector Housing Hub

Power the Hub Using the Universal Power Adapter

• Connect the to the on the rear of theUniversal Power Adapter Power Input Port

Hub AC Electrical Outletand to an .

Product specificaties

Merk:	StarTech.com
Categorie:	USB Hub
Model:	HB31C3A1CME
Kleur van het product:	Zwart
Gewicht:	281 g
Breedte:	59.6 mm
Diepte:	152 mm
Hoogte:	23.5 mm
Type stekker:	Type M
Gewicht verpakking:	1200 g
Breedte verpakking:	149 mm
Diepte verpakking:	290 mm
Hoogte verpakking:	70 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Staal
LED-indicatoren:	Link, Power
Stroom:	1 A
Meegeleverde kabels:	USB Type-A to USB Type-C, USB Type-C to USB Type-C
Duurzaamheidscertificaten:	CE, RoHS
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	100 - 240 V
Temperatuur bij opslag:	-10 - 55 °C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C:	1
Output current:	3 A
Spanning:	12 V
Hostinterface:	USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A:	3
Chipset:	VIA/VLI - VL822
(Buitenste) hoofdverpakking hoogte:	313 mm
(Buitenste) hoofdverpakking breedte:	390 mm
(Buitenste) hoofdverpakking lengte:	515 mm
Hoeveelheid per (buitenste) hoofdverpakking:	14 stuk(s)
Overdrachtssnelheid:	10000 Mbit/s
Stroomverbruik (typisch):	36 W
Bedrijfstemperatuur (T-T):	0 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 85 procent
Code geharmoniseerd systeem (HS):	84719000
Aantal poorten:	4
Klemmenblok inclusief:	Ja
Spanningsbeveiliging:	Ja
Inbegrepen soorten voedingsstekkers:	ANZ, EU, JP, UK, US
Hub-interfaces:	USB 3.2 Gen 2 (3.1 Gen 2) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Klemmenblokpoort:	Ja
UASP-ondersteuning:	Ja