Soundmaster SCD 5404 Handleiding

Soundmaster CD-spelers/recorder SCD 5404

Lees hieronder de 📖 handleiding in het Nederlandse voor Soundmaster SCD 5404 (3 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

This symbol indicates the presence of dangerous

voltage inside the enclosure, sufficient enough to

cause electric shock.

This symbol indicates the presence of important

operating and maintenance instructions for the

device.

Safety, Environmental and Setup Instructions

• Use the device in dry indoor environments only.

• Protect the device from humidity.

• Do not open the device. RISK OF ELECTRIC SHOCK! Refer opening and servicing to qualified personnel.

• Connect this device to a properly installed and earthed wall outlet only. Make sure the mains voltage corresponds with the

specifications on the rating plate.

• Make sure the mains cable stays dry during operation. Do not pinch or damage the mains cable in any way.

• Disconnect device warning: Main plug is used as the connection, so it should always remain ready operate.

• The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

• A damaged mains cable or plug must immediately be replaced by an authorized service center.

• In case of lightning, immediately disconnect the device from the mains supply.

• Children should be supervised by parents when using the device.

• Clean the device with a dry cloth only.

Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS!

• Do not expose the device to direct sunlight or other heat sources.

• Install the device at a location with sufficient ventilation in order to prevent heat accumulation.

• Do not cover the ventilation openings!

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.

• It shall be not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the

apparatus.

• The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations or placed in dusty environment.

• Never attempt to insert wires, pins or other such objects into the vents or opening of the unit.

• Install the device at a safe and vibration-free location.

• No naked flame sources, such as lighted candles, should be placed on the apparatus.

• Install the device as far away as possible from computers and microwave units; otherwise radio reception may be disturbed.

• Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized service/ customer

center.

• The device is equipped with a “Class 1 Laser”. Avoid exposure to the laser beam as this could cause eye injuries.

• Only use mercury and cadmium-free batteries.

• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Used batteries are hazardous waste and NOT to be disposed of with the household waste!!! Return the batteries to your dealer or to

collection points in your community.

• Keep batteries away from children. Children might swallow batteries. Contact a physician immediately if a battery was swallowed.

• Check your batteries regularly to avoid battery leakage.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPENING

THE COVER

PRESSING THE SAFETY INTERLOCK. AVOID EXPOSURE TO THE LASER BEAM.

ENVIRONMENTAL PROTEC

TION

Do not dispose of this product with the normal household waste at the end

of its life cycle. Return it to a collection point for the recycling of electrical

and electronic devices. This is indicated by the symbol on the product,

user manual or packaging.

The materials are reusable according to their markings. By reusing, recycling or

other forms of utilization of old devices you make an important contribution to

the protection of our environment.

Please contact your local authorities for details about collection points.

WARNING

Risk of electric shock

Do not open

Caution: To reduce the risk of electric shock, do not remove the cover (or back). There

are no user serviceable parts inside. Refer servicing to qualified service personnel.

Used batteries are hazardous waste and NOT to be disposed

of with the household waste! As a consumer you are legally

obligated all batteries to return for environmentally responsible

recycling – no matter whether or not the batteries contain harmful

substances*).

Return batteries

free of charge

to public collection points in your

community or to shops selling batteries of the respective kind.

Only return fully discharged batteries.

*) marked Cd = cadmium, Hg = mercury, Pb = lead

ENGLISH

ENG 1

1. DBBS Bass Boost

2. Function Selector

3. Volume

4. Display

5. Cassette Keys

6. CD Door

7. Band Selector FM-ST/FM

8. Handle

9. Tuning Control

10. CD Program

11. CD Skip/Search back-/forward

12. CD Stop

13. CD Play/Pause

14. CD repeat one/all

15. Speakers

16. FM Telescopic Antenna

17. Battery Compartment

18. AC Mains

Specification：

FM Frequency 87,5 – 108 MHz

Power Consumption 15 W

AC Power Supply AC 230-240V ~ 50Hz

DC Power Supply 8x 1,5V Type UM-1/D

Power Supply

AC Operation

Before operation please ensure VOLTAGE on the set corresponds to VOLTAGE of your local area. Unravel AC Line Cord, insert one

end into AC jack on the set and the other end into a standard AC outlet.

Battery Operation (Batteries not incl.)

Disconnect AC Cord Set completely. Open the Battery Compartment (17) and insert 8x R20/UM-1 “D” size batteries making sure the

indicated battery polarity is observed.

• Do not mix old and new batteries, or different types of batteries.

• Always remove the batteries to prevent damage if there is a battery leakage.

Volume and DBBS

Adjust the sound with the Volume (3) and DBBS (1) controls.

Headphone operation: (Headphone not incl.)

Connect a headphone into the headphone jack (3.5mm Klinke). The sound output will be cut automatically .

Economic Saving Power Mode

If the unit is idle for 120mins, it will

automatically switch to Saving Power mode.

Press the >/II PLAY/PAUSE button to resume.

ENGLISH

ENG 2

Radio Operation

1. Slide the Function selector (2) to RADIO

2. Slide the Band selector (7) to a desired setting FM-ST/FM

3. Rotate the Tuning control (9) to find the desired stations

- Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong. FM operation:

Cassette Operation

1. Slide the Function Selector (2) to TAPE

2. Press STOP/EJECT ■ (5) to open the cassette door

3. Press PLAY (5) to start playback ◄

4. To interrupt playback press (5). To resume, press the key again ||

5. By pressing or on the set, fast winding of the tape is possible in both directions|<< >>|

6. To Stop the tape, press STOP/EJECT (5) ■

CD Operation

1. Slide the Function Selector (2) to CD

2. Open the CD door (6) and insert a CD/-R/-RW with the printed side facing up and close the CD door

3. Press PLAY/PAUSE on the set to start playback

4. Press (11) once briefly for the next track, or press repeatedly until the desired track number appears in the display >>|

5. Press (11) once briefly to return to the beginning of a current track |<<

6. Press (11) more than once briefly for a previous track |<<

7. To pause playback press PLAY/PAUSE (13) again

8. To stop CD playback, press STOP (12)

CD repeat

Press 1x REPEAT (14) to repeat the current track

Press 2x REPEAT (14) to repeat all tracks

Press 3x REPEAT (14) to cancel the function

Programming CD track numbers

1. In Stop mode press PROG (10), display shows „PROG“

2. Press (11) for select your desired track |<< >>|

3. When your chosen track number appears, press PROG (10) once to store the track. The display shows prog and prog briefly

followed by your selected track number

4. Repeat steps 2 and 3 to select and store all desired tracks in this way

5. To play your program, press PLAY/PAUSE (13) button

6. To erase a program, press twice STOP (12) button

Product specificaties

Merk:	Soundmaster
Categorie:	CD-spelers/recorder
Model:	SCD 5404

Heb je hulp nodig?

Als je hulp nodig hebt met Soundmaster SCD 5404 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder Soundmaster

Soundmaster SCD 6800MP3 Handleiding

12 Juni 2023

Soundmaster RCD1180 Handleiding

26 Mei 2023

Soundmaster CD9290 Handleiding

9 Mei 2023

Soundmaster KCD50 Handleiding

7 Mei 2023

Soundmaster MCD400 Handleiding

5 Mei 2023

Soundmaster RCD 1400 Handleiding

28 April 2023

Soundmaster C500BE Handleiding

27 April 2023

Soundmaster TS500BE Handleiding

24 April 2023

Soundmaster CD9180 Handleiding

16 April 2023

Soundmaster SCD1800 Handleiding

11 April 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Marantz SA-17S1 Handleiding

15 November 2024

Klipsch PD-10AE Handleiding

13 November 2024

Rotel Michi Q5 Handleiding

3 November 2024

Reflexion PCD520MF Handleiding

29 September 2024

Auna Reference 802 Handleiding

24 September 2024

Advance X-CD1000 EVO Handleiding

11 September 2024

Shanling EC mini Handleiding

7 Augustus 2024

Shanling CD80 Handleiding

7 Augustus 2024

Shanling SCD1.3 Handleiding

7 Augustus 2024

Shanling ET3 Handleiding

7 Augustus 2024