Sony Vaio VGN-Z46MD Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Sony Vaio VGN-Z46MD (206 pagina's) in de categorie Laptop. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/206
N
Operating Instructions - Hardware Guide
Personal Computer
VGN-Z Series
2
n N
Contents
Before Use.......................................................................... 4
Finding More about Your VAIO Computer .................... 5
Ergonomic Considerations ............................................ 7
Getting Started.................................................................... 9
Locating Controls and Ports........................................ 10
About the Indicator Lights ........................................... 16
Connecting a Power Source ....................................... 17
Using the Battery Pack................................................ 18
Shutting Down Your Computer Safely ........................ 26
Updating Your Computer ............................................ 27
Using Your VAIO Computer.............................................. 28
Using the Keyboard..................................................... 29
Using the Touch Pad................................................... 31
Using Special-function Buttons ................................... 32
Using the Built-in Camera ........................................... 33
Using the Optical Disc Drive ....................................... 34
Using the Memory Stick .............................................. 42
Using Other Modules / Memory Cards........................ 47
Using the Internet........................................................ 53
Using the Network (LAN) ............................................ 55
Using the Wireless LAN .............................................. 56
Using the Bluetooth Function ...................................... 63
Using Fingerprint Authentication .................................68
Using the TPM.............................................................75
Using Peripheral Devices..................................................81
Connecting a Docking Station .....................................82
Connecting External Speakers or Headphones ..........90
Connecting an External Display ..................................91
Selecting Display Modes ...........................................100
Using the Multiple Monitors Function ........................102
Connecting an External Microphone .........................105
Connecting a USB Device .........................................106
Connecting an i.LINK Device.....................................108
Customizing Your VAIO Computer..................................110
Selecting Performance Modes ..................................111
Setting the Password.................................................113
Using the VAIO Control Center .................................125
Using the Power Saving Modes ................................126
Using the VAIO Power Management.........................131
Configuring Your Modem...........................................133
Protecting the Hard Disk............................................134
Upgrading Your VAIO Computer.....................................135
Adding and Removing Memory .................................136
3
n N
Precautions..................................................................... 141
Handling the LCD Screen ......................................... 142
Using the Power Source ........................................... 143
Handling Your Computer........................................... 144
Handling the Built-in Camera .................................... 147
Handling Discs .......................................................... 148
Using the Battery Pack.............................................. 149
Using Headphones.................................................... 150
Handling the Memory Stick ....................................... 151
Handling the Built-in Storage Device ........................ 152
Using Fingerprint Authentication ............................... 153
Using the TPM .......................................................... 154
Troubleshooting .............................................................. 155
Computer .................................................................. 157
System Security ........................................................ 165
Battery....................................................................... 166
Built-in Camera ......................................................... 168
Internet ...................................................................... 170
Networking ................................................................ 172
Bluetooth Technology ............................................... 177
Optical Discs ............................................................. 181
Display ...................................................................... 185
Printing ...................................................................... 190
Microphone ............................................................... 191
Speakers ...................................................................192
Touch Pad .................................................................193
Keyboard ...................................................................194
Floppy Disks ..............................................................195
Audio/Video ...............................................................196
Memory Stick.............................................................200
Peripherals ................................................................201
Docking Station .........................................................202
Trademarks .....................................................................203
Notice ..............................................................................205
4
n N
Before Use >
Before Use
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing experience.
!
External views illustrated in this manual may look slightly different from those of your computer.
Information in the supplied manuals including this User Guide is intended for users of the VAIO computers with the Microsoft
® Windows Vista®
32-bit operating system. You may find differences in the information when your computer comes preinstalled with the 64-bit operating system.
How to find specifications
Some features, options, and supplied items may not be available on your computer.
To find out about the configuration of your computer, see the Specifications (supplied with your computer).
5
n N
Before Use >
Finding More about Your VAIO Computer
Finding More about Your VAIO Computer
This section provides support information about your VAIO computer.
1. Printed Documentation
❑Quick Start Guide — An overview of components connection, set-up information, etc.
❑Specifications — The hardware configurations of your VAIO computer.
❑Troubleshooting and Recovery Guide
❑Safety Regulations
2. On-screen Documentation
❑VAIO Manual — General information and technical assistance for your VAIO computer.
To access VAIO Manual VAIO Manual, double-click on the desktop.
❑Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you
learn to use your computer.
To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows
key and press the F1 key.
6
n N
Before Use >
Finding More about Your VAIO Computer
3. Support Web Sites
If you have any problem with the computer, you can visit the following VAIO online web sites for troubleshooting:
❑http://www.sony-asia.com/support/vaio/ (English)
❑http://scs.sony.co.kr/ (Korean)
❑http://service.sony.com.tw/ (Traditional Chinese)
Before contacting VAIO Helpdesk by telephone, try to solve the problem by reading the supplied documentation and visiting
other Sony web sites.
❑For other Sony products, visit the web site at http://www.sony.net .
❑For available optional accessories, visit the following web sites:
❑http://vaio-online.sony.com/ (English)
❑http://vaio-online.sony.co.kr/ (Korean)
❑http://www.sonystyle.com.tw/vaio/ (Traditional Chinese)
7
n N
Before Use >
Ergonomic Considerations
Ergonomic Considerations
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:
❑Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your
wrists in a neutral, comfortable position (3) while using the keyboard or the pointing device. Let your upper arms hang
naturally at your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes,
muscles, or tendons.
❑Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.
8
n N
Before Use >
Ergonomic Considerations
❑Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.
❑Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect
lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.
❑Positioning an external display – When using an external display, set the display at a comfortable viewing distance.
Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.
9
n N
Getting Started >
Getting Started
This section describes how to get started using your VAIO computer.
❑Locating Controls and Ports (page 10)
❑About the Indicator Lights (page 16)
❑Connecting a Power Source (page 17)
❑Using the Battery Pack (page 18)
❑Shutting Down Your Computer Safely (page 26)
❑Updating Your Computer (page 27)
10
n N
Getting Started >
Locating Controls and Ports
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
!
The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some
countries or areas.
Front
ABuilt-in MOTION EYE camera (page 33)
BBuilt-in MOTION EYE camera indicator (page 16)
CNum lock indicator (page 16)
DCaps lock indicator (page 16)
EScroll lock indicator (page 16)
FLCD screen (page 142)
GBuilt-in speakers (stereo)
HKeyboard (page 29)
ITouch pad (page 31)
JFingerprint sensor (page 68)
11
n N
Getting Started >
Locating Controls and Ports
ASTAMINA mode indicator (page 16)
BPerformance selector switch (page 111)
CSPEED mode indicator (page 16)
DS1/S2 buttons (page 32)
EDrive eject button (page 32)
FCharge indicator (page 16)
GDisc drive indicator (page 16)
HMedia Access indicator (page 16)
IWIRELESS indicator (page 16)
JSD memory card slot (page 49)
KMemory Stick slot* (page 42)
LWIRELESS switch (page 56), (page 63)
MBuilt-in microphone (monaural)
* Your computer supports both the standard-size Memory Stick and the Duo-
size Memory Stick.
12
n N
Getting Started >
Locating Controls and Ports
Back
ABattery connector (page 18)
13
n N
Getting Started >
Locating Controls and Ports
Right
AOptical disc drive (page 34)
BOptical disc drive indicator (page 16)
CManual eject hole (page 181)
DSubstitute drive eject button (page 34)
EHDMI output port*1 (page 96)
FHi-Speed USB (USB 2.0) port*2 (page 106)
GMonitor port*3 (page 92)
HPower button/Power indicator (page 16)
*1 Functional only when your computer is in SPEED mode.
*2 Supports high-/full-/low- speeds.
*3 Not accessible when your computer is attached to the docking station.
14
n N
Getting Started >
Locating Controls and Ports
Left
ADC IN port (page 17)
BNetwork (Ethernet) port (page 55)
CAir vent
DExpressCard/34 slot (page 47)
ESecurity slot
FModem port (page 53)
GHi-Speed USB (USB 2.0) port* (page 106)
Hi.LINK 4-pin (S400) port (page 108)
IMicrophone jack (page 105)
JHeadphones jack (page 90)
* Supports high-/full-/low- speeds.
15
n N
Getting Started >
Locating Controls and Ports
Bottom
ADocking station connector (page 84)
BAir vents
CMemory module compartment cover (page 136)
16
n N
Getting Started >
About the Indicator Lights
About the Indicator Lights
Your computer is equipped with the following indicator lights:
Indicator Functions
Power 1Illuminates in green when the computer is on, blinks slowly in orange while the computer is in Sleep mode, and
turns off when the computer is off or in Hibernate mode.
Charge Illuminates while the battery pack is charging. See Charging the Battery Pack (page 21) for more information.
Media Access Illuminates while data is being read from or written to a memory card, such as the Memory Stick and the SD
memory card. (Do not place the computer into Sleep mode or turn it off when this indicator is lit.) When the
indicator is unlit, the memory card is not in use.
Built-in MOTION EYE camera Illuminates while the built-in camera is in use.
STAMINA mode Illuminates while the computer is in STAMINA mode to conserve battery power.
SPEED mode Illuminates while the computer is in SPEED mode to provide faster performance.
Optical disc drive Illuminates while the drive is reading or writing data. When the indicator is unlit, the optical disc media is not in
use.
Disc drive Illuminates while the built-in storage device or the optical disc drive is running to read or write data.
Do not place the computer into Sleep mode or turn it off when this indicator is lit.
Num lock Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.
The numeric keypad is not active when the indicator is unlit.
Caps lock Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is lit. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is unlit.
Scroll lock Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator is unlit. The Scr Lk key functions differently depending on the program you are using and does not
work with all programs.
WIRELESS Illuminates when one or more wireless options are enabled.
17
n N
Getting Started >
Connecting a Power Source
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer.
Using the AC Adapter
✍
Use only the supplied AC adapter for your computer.
To use the AC adapter
1Plug one end of the power cord (1) into the AC adapter (3).
2Plug the other end of the power cord into an AC outlet (2).
3Plug the cable connected to the AC adapter (3) into the DC IN port (4) on the computer or on the optional docking station.
!
The shape of the DC In plug varies depending on the AC adapter.
✍
To disconnect your computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 129).
18
n N
Getting Started >
Using the Battery Pack
Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
Installing the Battery Pack
To install the battery pack
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switch (1) inward.
19
n N
Getting Started >
Using the Battery Pack
3Slide the battery pack diagonally into the battery compartment until the projections (2) on either side of the battery
compartment fit into the U-shaped cuts (3) on either side of the battery pack.
20
n N
Getting Started >
Using the Battery Pack
4Push the battery pack down into the compartment until it clicks into place.
5Slide the battery LOCK switch outward to secure the battery pack on the computer.
✍
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance
standards and supplied by Sony for your VAIO computer. Some VAIO computers may operate only with genuine Sony battery packs.
21
n N
Getting Started >
Using the Battery Pack
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1 Install the battery pack.
2 Connect the computer to a power source with the AC adapter.
The charge indicator light turns on while the battery pack is charging. When the battery pack charges close to the
maximum charge level you selected with the battery charge functions, the charge indicator turns off. To select your desired
maximum charge level, see Using the Battery Charge Functions (page 23).
!
Charge the battery pack as described in this manual from your first battery charge.
Charge indicator status Meaning
Lit in orange The battery pack is charging.
Blinks along with the green power
indicator
The battery pack is running out of power. (Normal
mode)
Blinks along with the orange power
indicator
The battery pack is running out of power. (Sleep mode)
Blinks fast in orange A battery error has occurred due to a failed battery
pack or an unlocked battery pack.
22
n N
Getting Started >
Using the Battery Pack
✍
Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and
install a fully charged battery pack.
Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect
the life of battery.
While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life
is short. To avoid loss of data when using battery power, you should save your data frequently and manually activate a power management mode, such
as Sleep or Hibernate.
If the battery pack wears out when the computer enters Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
23
n N
Getting Started >
Using the Battery Pack
Using the Battery Charge Functions
You can customize the current battery charging method using the Battery Charge Functions. To make the life of battery
longer, enable the battery care function.
To enable the battery care function
1Click Start, All Programs, and VAIO Control Center.
2Click Power Management and then Battery Charge Functions.
3Click Advanced.
4Click to select the Enable Battery Care Function check box.
5Select the desired maximum charge level.
6Click OK.
To check the battery charge capacity
Follow steps 1 to 3 in To enable the battery care function above and check detailed information. If the battery charge
capacity is low, replace the battery pack with a new genuine Sony battery pack.
24
n N
Getting Started >
Using the Battery Pack
Using the Battery Life Conserving Wallpaper
You can conserve your battery life just by setting the specific wallpaper as your desktop background.
To set the battery life conserving wallpaper
1 Click Start, All Programs, and VAIO Control Center.
2 DisplayClick and then Long Battery Life Wallpaper Setting.
3 Click Set Long Battery Life Wallpaper.
At the confirmation prompt, click OK.
25
n N
Getting Started >
Using the Battery Pack
Removing the Battery Pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
To remove the battery pack
1 Turn off the computer and close the LCD screen lid.
2 Slide the battery LOCK switch (1) inward.
3 Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and
lift the battery pack in the direction of the arrow, and then slide it away from the computer.
26
n N
Getting Started >
Shutting Down Your Computer Safely
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1 Turn off any peripherals connected to the computer.
2 Click Start, the arrow next to the Lock button, and then Shut Down.
3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
27
n N
Getting Started >
Updating Your Computer
Updating Your Computer
Be sure to install the latest updates on your computer with the following software applications so that the computer can run
more efficiently.
❑Windows Update
Click Start, All Programs, and Windows Update and then follow the on-screen instructions.
❑VAIO Update 4
Click Start, All Programs, VAIO Update 4, and Go to VAIO Web Support and then follow the on-screen instructions.
!
Your computer must be connected to the Internet to download the updates.
28
n N
Using Your VAIO Computer >
Using Your VAIO Computer
This section describes how to get the most out of using your VAIO computer.
❑Using the Keyboard (page 29)
❑Using the Touch Pad (page 31)
❑Using Special-function Buttons (page 32)
❑Using the Built-in Camera (page 33)
❑Using the Optical Disc Drive (page 34)
❑Using the Memory Stick (page 42)
❑Using Other Modules / Memory Cards (page 47)
❑Using the Internet (page 53)
❑Using the Network (LAN) (page 55)
❑Using the Wireless LAN (page 56)
❑Using the Bluetooth Function (page 63)
❑Using Fingerprint Authentication (page 68)
❑Using the TPM (page 75)
29
n N
Using Your VAIO Computer >
Using the Keyboard
Using the Keyboard
Your keyboard has additional keys that perform model-specific tasks.
Combinations and Functions with the Fn Key
✍
Some keyboard functions can be used only after the operating system is finished launching.
Combinations/Feature Functions
Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.
Fn + 2 (F3/F4): volume Changes the volume level.
To increase the volume, press the Fn+F4 keys and then the M , or key, or keep pressing the
Fn F4+ keys.
To decrease the volume, press the Fn+F3 keys and then the m or < key, or keep pressing the
Fn F3+ keys.
Fn + 8 (F5/F6): brightness control Changes the LCD brightness of your computer screen.
To increase lighting intensity, keep pressing the Fn F6+ keys or press the Fn+F6 keys and then
the M or , key.
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then
the m or < key.
Fn + /T (F7): display output Toggles among your computer screen, an external display, and simultaneous output to both.
Fn + / (F9/F10): zoom Changes the size of an image or a document displayed on some software.
To make the view look smaller and further away (zoom out), press the Fn+F9 keys.
To make the view look bigger and closer (zoom in), press the Fn+F10 keys.
See the help file included with the VAIO Control Center for more information.
30
n N
Using Your VAIO Computer >
Using the Keyboard
Fn + (F12): hibernate Provides the lowest level of power consumption. When you execute this command, the states
of the system and the connected peripheral devices are saved to the built-in storage device and
the system power is turned off. To return the system to its original state, use the power button
to turn on the power.
For details on power management, see Using the Power Saving Modes (page 126).
Combinations/Feature Functions
31
n N
Using Your VAIO Computer >
Using the Touch Pad
Using the Touch Pad
You can point to, select, drag, and scroll objects on the screen using the touch pad.
✍
You can disable/enable the touch pad while a mouse is connected to your computer. To change the touch pad settings, use the VAIO Control Center.
!
Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the
keyboard for pointer operations.
Action Description
Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object.
Click Press the left button (3) once.
Double-click Press the left button twice in a row.
Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
Drag Slide your finger on the touch pad while pressing the left button.
Scroll Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll
horizontally (the scroll function is available only with applications that support a touch pad scroll feature).
32
n N
Using Your VAIO Computer >
Using Special-function Buttons
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
Special-function button Functions
S1/S2 buttons Execute the task that is assigned to each button by default.
You can change the default assignment with the VAIO Control Center.
✍
You can assign VAIO Presentation Support to the S1 button. In Presentation mode, some functions of the computer that
may disturb a presentation are disabled, such as a screen saver, the power saving modes, and system message generation.
In addition, you can use handy functions for the presentation, for example, displaying a document for quick reference and
the mirror image of the external display simultaneously on the computer. To bring the computer back into Normal mode,
press this button once again.
To change the Presentation mode settings, click Start, Control Panel, Mobile PC, and Adjust settings before giving a
presentation under Windows Mobility Center, and change the settings in the Presentation Settings window.
Drive eject button Ejects the optical disc drive tray.
If this button does not work, try the substitute drive eject button on the optical disc drive.
33
n N
Using Your VAIO Computer >
Using the Built-in Camera
Using the Built-in Camera
Your computer is equipped with a built-in MOTION EYE camera.
With the preinstalled image capture software, you can perform the following operations:
❑Capturing still images and movies
❑Sensing and capturing object movements for monitoring purposes
❑Editing captured data
✍
Turning on the computer activates the built-in camera.
Video conference is possible with the appropriate software.
!
Launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in camera.
Do not place your computer into Sleep or Hibernate mode while you are using the built-in camera.
You cannot operate the built-in camera with the Microsoft Windows Movie Maker software.
To use the preinstalled image capture software
1Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2.
2Click the desired icon in the main window.
For detailed information on how to use the software, see the help file included with the software.
✍
When capturing an image or a movie in a dark place, click the Capture icon or the Record icon in the main window, and then click the WebCam Settings
icon and select the low light or low light compensation option in the properties window.
34
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
Using the Optical Disc Drive
Your computer is equipped with an optical disc drive.
Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
To insert a disc
1 Turn on the computer.
2 Press the disc drive eject button (1) to open the drive.
The drive tray slides out.
!
If the power supply to the optical disc drive is disabled by the VAIO Power Management, it will take a while to eject the drive tray with the drive eject
button.
✍
If the drive eject button does not work, try the substitute drive eject button on the optical disc drive. The substitute drive eject button, however, is not
functional if the power supply to the optical disc drive is disabled by the VAIO Power Management.
35
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
3Place a disc in the middle of the drive tray with the label side facing upward and gently push it down until the disc clicks
into place.
!
Do not exert pressure on the drive tray. Be sure to hold the bottom of the drive tray when placing/removing a disc onto/from the tray.
4Close the drive tray by pushing it in gently.
!
Do not remove the optical disc when your computer is in a power saving mode (Sleep or Hibernate). Be sure to bring the computer back into Normal
mode before removing the disc.
36
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
Supported Disc Media
Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased.
See the reference chart below to find out which type of optical disc drive supports which types of media.
PR: playable and recordable
P: playable but not recordable
–: not playable or recordable
CD-
ROM
Video
CD
Music
CD
CD
Extra
CD-R/
RW
DVD-
ROM
DVD-
Video
DVD-R/
RW
DVD+R/
RW
DVD+R DL
(Double
Layer)
DVD-R DL
(Dual
Layer)
DVD-
RAM*1 *2
BD-
ROM
BD-R/RE*3
DVD±RW/
±R DL/RAM
P P P P PR P P PR PR PR PR PR – –
Blu-ray Disc P P P P PR P P PR PR P P PR P PR*4
Blu-ray Disc
Combo
PPPPPR*5 P P PR PR PR PR PR P P
*1 The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge.
*2 Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.
DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.
*3 The Blu-ray Disc drive on your computer does not support BD-RE Disc media in Version 1.0 format and Blu-ray Disc media with a cartridge.
*4 Supports writing data to BD-R Version 1.1/1.2/1.3 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and BD-RE Version
2.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB).
*5 Writing data to Ultra Speed CD-RW discs is not supported.
37
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
!
This product is designed to play back discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Be aware that the audio side (non-DVD
side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
When you buy pre-recorded or blank discs for use with your VAIO computer, be sure to read the notices on the disc package carefully to check both
playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO optical disc drives
with discs that are not compliant with the official "CD," "DVD," or "Blu-ray Disc" standard. USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE
TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.
✍
8 cm disc writing is not supported.
!
To play copyright protected Blu-ray Disc media continually, update the AACS key. The AACS key update requires Internet access.
As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc media playback. VAIO computers may not support
movie playback on packaged media recorded in AVC or VC1 formats at high bit rates.
Region settings are required for some contents on DVD and BD-ROM Disc media. If the region setting on the optical disc drive does not match the
region coding on the disc, playback is not possible.
Unless your external display is compliant with the High-bandwidth Digital Content Protection (HDCP) standard, you cannot play or view the contents
on copyright protected Blu-ray Disc media.
Some contents may restrict video output to standard definition or prohibit analog video output. It is strongly recommended that a digital HDCP
compliant environment be implemented for optimum compatibility and viewing quality.
Do not use memory-resident utility software when playing or writing a disc. This may cause the computer to malfunction.
38
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
Notes on Using the Optical Disc Drive
Notes on writing data to a disc
❑Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc
drive.
❑Do not strike or shake your computer while the optical disc drive is writing data to a disc.
❑Do not plug or unplug the AC adapter while the optical disc drive is writing data to a disc.
❑Do not attach or disconnect your computer to or from the docking station (optional) while the optical disc drive is writing
data to a disc.
Notes on playing discs
To achieve optimum performance when playing discs, you should follow these recommendations:
❑Some CD players and computer optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW
media.
❑Some DVD players and computer optical disc drives may not be able to play DVDs created with the DVD+R DL, DVD-R
DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM media.
❑You may not be able to play some of Blu-ray Disc contents on your computer, or the computer may become unstable
during Blu-ray Disc playback. To play such contents normally, download and install the latest updates for the WinDVD BD
using the VAIO Update.
For information on how to use the VAIO Update, see Updating Your Computer (page 27).
❑Depending on system environment, you may find sound interruptions and/or dropped frames during AVC HD playback.
❑Do not place your computer into either of the power saving modes while your computer is playing a disc.
39
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
Notes on region codes
❑Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you
can play the disc. If the region code indicates "all," you can play this disc in most regions of the world. If the region code
for your residence area is different from the label, you cannot play the disc on your computer.
To find out the region code for your residence area, see the following table.
If it is your first time to play a DVD video on your computer, follow these steps before inserting the disc:
1Click Start and Computer.
2Right-click the optical disc drive icon and select Properties.
3Click the Hardware tab.
4Select your optical disc drive from the All disk drives list and click Properties.
5Click the DVD Region tab.
6Select an appropriate region from the list and click OK.
Residence area Region code Residence area Region code Residence area Region code
Australia* 4 China 6 Hong Kong* 3
India* 5 Indonesia* 3 Japan* 2
Korea 3 Kuwait* 2 Malaysia* 3
New Zealand* 4 Philippines* 3 Saudi Arabia* 2
Singapore* 3 South Africa* 2 Taiwan 3
Thailand* 3 United Arab Emirates* 2 Vietnam 3
* A region code is not assigned to your computer's optical disc drive by default.
40
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
!
You can change the region code only a limited number of times. When you have exceeded this number, the drive's region code is permanently assigned
and you will not be able to change it again. Reconfiguring your computer does not reset this count.
If you change the region code while the WinDVD or WinDVD BD software is running, restart the software or eject the disc and re-insert it to make the
new setting effective.
41
n N
Using Your VAIO Computer >
Using the Optical Disc Drive
Playing Discs
To play a disc
1Insert a disc into the optical disc drive.
!
Connect the AC adapter to the computer and close all running software applications before playing a disc.
2If nothing appears on the desktop, click Start, All Programs, and the desired software to play the disc.
For instructions on how to use the software, see the help file included with the software.
Copying Files to Discs
To copy files to a disc
1Insert a recordable disc into the optical disc drive.
!
Connect the AC adapter to the computer and close all running software applications before copying files to a disc.
2If nothing appears on the desktop, click Start, All Programs, and the desired disc burning software to copy files to the
disc.
For instructions on how to use the software, see the help file included with the software.
42
n N
Using Your VAIO Computer >
Using the Memory Stick
Using the Memory Stick
The Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing
digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable,
it can be used for external data storage.
Before You Use the Memory Stick
The Memory Stick slot on your computer can accommodate both standard- and Duo-size media and supports Memory Stick
PRO, Memory Stick PRO Duo, and Memory Stick PRO-HG Duo with high-speed data transfer and large data capacity
capabilities.
For the latest information about the Memory Stick, visit the Memory Stick web site at http://www.memorystick.com/en/ .
43
n N
Using Your VAIO Computer >
Using the Memory Stick
Inserting and Removing a Memory Stick
To insert a Memory Stick
1 Locate the Memory Stick slot.
2 Hold the Memory Stick with the arrow facing upward and pointing toward the slot.
3 Carefully slide the Memory Stick into the slot until it clicks into place.
✍
The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed. If nothing appears on the desktop,
click Start, Computer, and double-click the Memory Stick icon.
44
n N
Using Your VAIO Computer >
Using the Memory Stick
✍
You can insert a Duo-size Memory Stick directly into the Memory Stick slot without using a Memory Stick Duo adaptor.
!
Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the
media, do not force the Memory Stick into the slot if you cannot insert it smoothly.
Before using a Memory Stick Micro (M2), be sure to insert it into an M2 Standard-size adaptor or M2 Duo adaptor. If you insert the media directly into
the Memory Stick slot without the adaptor, you may not be able to remove it from the slot.
The Memory Stick Micro in an M2 Duo adaptor may not operate properly if it is additionally inserted into a Memory Stick Duo adaptor.
To remove a Memory Stick
!
Do not remove the Memory Stick while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to
load, so make sure the indicator is unlit before removing the Memory Stick.
1 Check that the Media Access indicator light is unlit.
2 Push in the Memory Stick toward the computer and release.
The Memory Stick ejects.
3 Pull the Memory Stick out of the slot.
!
Always remove the Memory Stick gently, or it may pop out unexpectedly.
45
n N
Using Your VAIO Computer >
Using the Memory Stick
Formatting a Memory Stick
To format a Memory Stick
The Memory Stick has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.
!
Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media.
Formatting the Memory Stick erases the entire data on the media. Before formatting the media, make sure that it does not contain your valuable data.
Do not remove the Memory Stick from the slot while formatting. This could cause a malfunction.
1 Carefully slide the Memory Stick into the slot until it clicks into place.
2 Click Start and Computer to open the Computer window.
3 Right-click the Memory Stick icon and select Format.
4 Click Restore device defaults.
!
The size of the allocation unit and file system may change.
Do not select NTFS from the File system drop-down list as it may cause a malfunction.
✍
The formatting process will be completed more quickly if you select Quick Format in Format options.
5 Click Start.
6 Follow the on-screen instructions.
!
It may take time to format the Memory Stick depending on the media type.
46
n N
Using Your VAIO Computer >
Using the Memory Stick
Notes on Using the Memory Stick
❑Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that
are available as of January 2009. However, not all the Memory Stick that meet the same specifications as the compatible
media are guaranteed of compatibility.
❑Inserting a Memory Stick with multiple conversion adaptors is not guaranteed of compatibility.
❑MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick with the
MagicGate logo to use this feature.
❑Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior
consent from the respective copyright holders. Accordingly, the Memory Stick with such copyrighted data can be used
only within the law.
❑The Memory Stick slot on your computer does not support 8-bit parallel data transfer (high-speed data transfer).
❑Do not insert more than one Memory Stick into the slot. Improper insertion of the media may damage both your computer
and the media.
47
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
Using Other Modules / Memory Cards
Using the ExpressCard Module
Your computer is equipped with an ExpressCard/34 slot* for transferring data among digital cameras, camcorders, music
players, and other audio/video devices. This slot can only accommodate an ExpressCard/34 (34 mm wide) module*.
* Referred to as the ExpressCard slot and the ExpressCard module in this manual.
To insert an ExpressCard module
1Locate the ExpressCard slot.
2Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.
✍
If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Make sure you use the most recent driver software provided by the ExpressCard module manufacturer.
48
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
To remove an ExpressCard module
✍
To remove the ExpressCard module when your computer is off, skip steps 1 to 4.
1 Double-click the Safely Remove Hardware icon on the taskbar.
2 Select the hardware you want to unplug.
3 Click Stop.
4 Follow the on-screen instructions to remove the ExpressCard module.
5 Push in the ExpressCard module toward the computer so that the module pops out.
6 Gently take hold of the ExpressCard module and pull it out of the slot.
49
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
Using the SD Memory Card
Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras,
camcorders, music players, and other audio/video devices.
Before you use the SD memory card
The SD memory card slot on your computer supports the following memory cards:
❑SD memory card
❑SDHC memory card
❑MultiMediaCard (MMC)
For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 5) to visit the
appropriate support web site.
50
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
To insert an SD memory card
1 Locate the SD memory card slot.
2 Hold the SD memory card with the arrow facing upward and pointing toward the slot.
3 Carefully slide the SD memory card into the slot until it clicks into place.
Do not force the card into the slot.
✍
If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
51
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
To remove an SD memory card
1 Check that the Media Access indicator light is unlit.
2 Push in the SD memory card toward the computer and release.
The SD memory card ejects.
3 Pull the SD memory card out of the slot.
52
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
Notes on Using Memory Cards
General notes on using the memory card
❑Be sure to use memory cards that are compliant with the standards supported by your computer.
❑Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid
damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.
❑Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.
❑Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.
❑Do not attempt to insert an memory card or memory card adaptor of a different type into the memory card slot. An
incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage
to your computer.
Notes on using the SD memory card
❑Your computer has been tested and found compatible only with major memory cards available as of January 2009.
However, not all memory cards that meet the same specifications as the compatible media are guaranteed of
compatibility.
❑SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested
and found compatible with your computer.
❑The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory
card and the SDHC memory card.
53
n N
Using Your VAIO Computer >
Using the Internet
Using the Internet
Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for
connecting your computer to the Internet.
The following types of Internet connection services may be available from your ISP:
❑Fiber to the Home (FTTH)
❑Digital Subscriber Line (DSL)
❑Cable modem
❑Satellite
❑Dial-up
For detailed information on devices required for the Internet and how to connect your computer to the Internet, ask your ISP.
✍
To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN
(page 56) for more information.
!
When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.
If your computer is not equipped with a built-in modem, you may need to connect an external modem device, for example a USB telephone modem, a
DSL modem, or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the manual that
came with your modem.
54
n N
Using Your VAIO Computer >
Using the Internet
To connect a telephone cable
!
The following procedure applies to models with a built-in modem only.
1 Plug one end of the phone cable (1) into the modem port on the computer.
2 Plug the other end into the wall jack (2).
!
Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the built-in modem.
If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.
To set up a dial-up connection to the Internet
!
The following procedure applies to models with a built-in modem only.
1 Click Start and Control Panel.
2 Click Network and Internet.
3 Click Network and Sharing Center.
4 Click Set up a connection or network in the left pane.
5 Click Set up a dial-up connection and Next.
6 Follow the on-screen instructions.
55
n N
Using Your VAIO Computer >
Using the Network (LAN)
Using the Network (LAN)
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with an Ethernet network cable.
Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer or the optional docking
station and the other end to your network. For detailed settings and devices needed to connect to the network, ask your
network administrator.
✍
Your computer can be connected to the network with the default settings.
When your computer is attached to the optional docking station, you need to select which network (Ethernet) port to use. Follow the on-screen
instructions.
!
Do not plug a telephone cable into the network (Ethernet) port on your computer.
If the network (Ethernet) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage,
overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- Private branch exchange (PBX)
56
n N
Using Your VAIO Computer >
Using the Wireless LAN
Using the Wireless LAN
Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other
through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio)
connection.
The WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming. You can still access
information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to
another.
You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network.
✍
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN function, read the Safety Regulations carefully.
WLAN uses the IEEE 802.11a
*/b/g standard or the IEEE 802.11n
* draft standard, which specifies the type of technology used. The standard includes
the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access
(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based on interoperable security
enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with
the IEEE 802.11i specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication using
802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between clients and access points. Besides
that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks,
and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and is also designed to secure
all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n draft standard, multi-band and multi-mode. In addition, based on
the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and Technology
(NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.
* See the specifications to find out about the configuration of your computer.
57
n N
Using Your VAIO Computer >
Using the Wireless LAN
The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications
than the IEEE 802.11b standard.
The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band.
The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band.
Wireless LAN devices using the 2.4 GHz band cannot communicate with devices using the 5 GHz band because the frequencies are different.
The 2.4 GHz band used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from
other devices that use the same band are employed on wireless LAN compatible devices, such interference may cause lower communication speed,
narrower communication range, or broken wireless connections.
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.
Actual communication speed may not be as fast as the one displayed on your computer.
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with
IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase
the communication speed.
58
n N
Using Your VAIO Computer >
Using the Wireless LAN
Communicating without an Access Point (Ad-hoc)
An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller
or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network
easily at home.
59
n N
Using Your VAIO Computer >
Using the Wireless LAN
To communicate without an access point (ad-hoc)
!
The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc
networks.
1 Turn on the WIRELESS switch.
2 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
3 Click Start and Control Panel.
4 Click View network status and tasks under Network and Internet.
5 Click Set up a connection or network in the left pane.
The Set up a connection or network window appears.
6 Select an option to specify the ad-hoc network settings and click Next.
7 Follow the on-screen instructions.
60
n N
Using Your VAIO Computer >
Using the Wireless LAN
Communicating with an Access Point (Infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless
LAN network. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
The access point will select which channel to use on an infrastructure network.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
61
n N
Using Your VAIO Computer >
Using the Wireless LAN
To connect to a wireless network
1 Make sure an access point is set up.
See the manual that came with your access point for more information.
2 Turn on the WIRELESS switch.
3 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
!
Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. To enable
5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands on the WLAN tab in the VAIO
Smart Network settings window.
4 Right-click or on the taskbar and select Connect to a network.
5 Select the desired access point and click Connect.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be a text string between 8 and
63 characters in length or a hexadecimal string of 64 characters.
62
n N
Using Your VAIO Computer >
Using the Wireless LAN
Stopping Wireless LAN Communications
To stop wireless LAN communications
Click the button next to or above the WLAN icon in the VAIO Smart Network window.
!
Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
63
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Using the Bluetooth Function
You can establish wireless communications between your computer and other Bluetooth ® devices such as another computer
or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area.
Notes on using the Bluetooth function
❑The data transfer rate varies, depending on the following conditions:
❑Obstacles, such as walls, located between devices
❑Distance between devices
❑Material used in walls
❑Proximity to microwaves and cordless telephones
❑Radio frequency interference and other environmental conditions
❑Device configuration
❑Type of software application
❑Type of operating system
❑Use of both wireless LAN and Bluetooth functions at the same time on your computer
❑Size of file being exchanged
❑Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and
electromagnetic interference in the environment.
❑All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may
not be possible in all situations.
64
n N
Using Your VAIO Computer >
Using the Bluetooth Function
❑Video and audio may not be synchronized if you play videos on your computer with audio output from a connected
Bluetooth device. This is a frequent occurrence with Bluetooth technology and is not a malfunction.
❑The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in
reduced communication speeds and distances than the standard values.
❑The Bluetooth function may not work with other devices, depending on the manufacturer or the software version employed
by the manufacturer.
❑Connecting multiple Bluetooth devices to your computer may cause channel congestion, resulting in poor performance
of the devices. This is normal with Bluetooth technology and is not a malfunction.
65
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Bluetooth Security
The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your
computer.
The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
66
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Communicating with Another Bluetooth Device
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
To communicate with another Bluetooth device
To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the
Bluetooth function, search for Bluetooth information using Windows Help and Support.
1 Turn on the WIRELESS switch.
2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
67
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Stopping Bluetooth Communications
To stop Bluetooth communications
1 Turn off the Bluetooth device that is communicating with your computer.
2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window.
68
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
Using Fingerprint Authentication
Your computer is equipped with a fingerprint sensor to provide you with additional convenience.
Once you have registered your fingerprint(s), the fingerprint authentication function offers:
❑A substitute for password entry
❑Logging onto Windows (page 72)
If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for
password entry when logging onto Windows.
❑Power-on Security feature (page 72)
If you have set the power-on password , you can substitute (page 114) and/or the hard disk password (page 119)
fingerprint authentication for password entry when starting your computer.
❑Password Bank for quick web site access (page 73)
You can substitute fingerprint authentication for entering information (user accounts, passwords, etc.) required to access
the password-protected web sites.
❑File Safe feature to encrypt/decrypt data (page 73)
With the File Safe feature, you can encrypt files and folder to create an encrypted archive. To decrypt or access such
encrypted archives, you can use the fingerprint authentication or enter the password you specified for encryption.
❑Application launcher function for quick application access (page 73)
Once you have assigned an application to your finger, you can then swipe the finger across the fingerprint sensor to
launch the assigned application.
69
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
Registering a Fingerprint
To use the fingerprint authentication function, you must register your fingerprint(s) in your computer.
✍
Set the Windows password on your computer before registration. See Adding the Windows Password (page 123) for the detailed instructions.
To register a fingerprint
✍
Up to 10 fingerprints can be registered for each user and up to 21 fingerprints can be registered for logging onto your system using the Power-on
Security feature. You can also select the fingerprint you want to use for the Power-on Security feature later.
1 Click Start, All Programs, Protector Suite QL, and Control Center.
2 Click Fingerprints and Initialize.
3 Follow the on-screen instructions.
✍
For detailed information, see the help file.
70
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
If you have failed to register a fingerprint, follow these steps to try again.
1 Place the top joint of your finger on the fingerprint sensor (1).
71
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
2 Swipe your finger perpendicularly across the fingerprint sensor.
!
Place your fingertip flat in the center of the fingerprint sensor.
Scan your fingerprint from the top joint of the finger to the fingertip.
Keep your finger in contact with the fingerprint sensor while swiping.
Fingerprint registration may fail if you move your finger too fast or too slow. Let the fingerprint sensor take about one second to scan your fingerprint.
You may not be able to register and/or have your fingerprint(s) recognized if your finger is excessively dry or wet, wrinkled, injured, dirty, etc.
Register more than one fingerprint in case that the fingerprint sensor fails to recognize the fingerprint.
Be sure to clean your fingertip(s) and the fingerprint sensor before swiping in order to keep good recognition performance.
72
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
Logging Onto Your System
To use the fingerprint authentication function in place of password entry to log onto your system, you need to set the power-
on, hard disk, and Windows passwords and configure your computer for fingerprint authentication.
For setting the power-on, hard disk, and Windows passwords, see Setting the Password (page 113).
For detailed information, see the help file included with the Protector Suite QL.
Logging onto Windows
If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for Windows
password entry. To log onto Windows, swipe the registered finger across the fingerprint sensor when the Windows log-on
screen appears.
Power-on Security feature
If you have set the power-on password (page 114) and/or the hard disk password (page 119), you can substitute fingerprint
authentication for password entry when starting your computer.
73
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
Using the Password Bank
Once you have registered your user information (user accounts, passwords, etc.) for web sites in the Password Bank, you
can substitute fingerprint authentication for entering information required to access the password-protected web sites.
For detailed information, see the help file included with the Protector Suite QL.
!
You may not be able to use the Password Bank feature depending on the web site you access.
Using the File Safe Feature
With the File Safe feature, you can create an encrypted archive to include a file and/or folder for protection against
unauthorized access. The encrypted archive can be decrypted or unlocked for included file/folder access by swiping your
finger across the fingerprint sensor or entering the backup password you specified for encryption.
For detailed information, see the help file included with the Protector Suite QL.
Using the Application Launcher
The application launcher feature is available on your computer for launching your preferred application (executable file) that
is assigned to one of your fingers with a registered fingerprint. Once you have assigned an application to your finger, you can
launch the assigned application simply by swiping the finger across the fingerprint sensor.
For detailed information, see the help file included with the Protector Suite QL.
Using Fingerprint Authentication with the TPM
With the TPM data encryption feature, using fingerprint authentication can strengthen computer security. For instructions on
how to use the TPM, see Using the TPM (page 75).
For detailed information, see the help file included with the Protector Suite QL.
74
n N
Using Your VAIO Computer >
Using Fingerprint Authentication
Erasing the Registered Fingerprints
Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprint
data registered on the fingerprint sensor after erasing the data stored on your built-in storage device.
To erase the registered fingerprints
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < or , key to select Security to display the tab.Security
4 Press the m key to select Clear Fingerprint Data and press the Enter key.
5 At the confirmation prompt, select Continue and press the Enter key.
The fingerprint data registered on the fingerprint sensor is erased automatically after your system restarts.
75
n N
Using Your VAIO Computer >
Using the TPM
Using the TPM
The embedded Trusted Platform Module (TPM) is embedded in your computer to provide basic security functions. In
combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate
access.
TPMs are defined by Trusted Computing Group (TCG) and also called security chips.
76
n N
Using Your VAIO Computer >
Using the TPM
Important Notice
❑Do not encrypt the files containing keys to be used for encryption and the folders that include such files.
Encrypting the files in the folders containing basic user keys and others, using the Encrypting File System (EFS) will
disable you to launch your TPM software and decrypt the encrypted data in the following cases:
❑The TPM software has been installed.
❑The platform has been initialized.
❑The EFS function has been enabled in user initialization process.
With the default settings, the files in the folders below cannot be encrypted because they have system attributes.
Do not change the system attributes of the files in the folders below.
!
The following folders are invisible by default.
❑Folders containing basic user keys and others
C:\<username>\All Users\Infineon\TPM Software 2.0\BackupData
C:\<username>\All Users\Infineon\TPM Software 2.0\PlatformKeyData
C:\<username>\All Users\Infineon\TPM Software 2.0\RestoreData
(C:\<username>\All Users is a shortcut to C:\ProgramData.)
C:\<username>\<account>\AppData\Roaming\Infineon\TPM Software 2.0\UserKeyData
77
n N
Using Your VAIO Computer >
Using the TPM
❑Do not encrypt any one of the following archive, backup, or token files. There will be no way to restore them if you
carelessly encrypt them.
Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and
folders including them.
❑Automatic backup file
Default file name: SPSystemBackup.xml
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)
❑Storage folder for automatic backup data
Default folder name: SPSystemBackup
The folder is created as the subfolder for the SPSystemBackup.xml file.
❑Token file for restoring the TPM configuration
Default file name: SPEmRecToken.xml
Default path: Removable media (FD, USB memory, etc.)
❑Key and certificate backup file
Default file name: SpBackupArchive.xml
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)
❑PSD backup file
Default file name: SpPSDBackup.fsb
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)
78
n N
Using Your VAIO Computer >
Using the TPM
❑Do not encrypt any one of the following password reset token or secret files. There will be no way to reset the password
if you carelessly encrypt them.
Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and
folders including them.
❑Password reset token file
Default file name: SPPwdResetToken.xml
Default path: Removable media (FD, USB memory, etc.)
❑Password reset secret file
Default file name: SPPwdResetSecret.xml
Default path: Removable media (FD, USB memory, etc.)
79
n N
Using Your VAIO Computer >
Using the TPM
Configuring the TPM
To use the embedded TPM, you need to:
1 Enable the TPM in the BIOS setup screen.
2 Install the Infineon TPM Professional Package.
3 Initialize and configure the TPM.
To enable the TPM in the BIOS setup screen
1 Turn on your computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < , or key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
4 Press the M or m key to select Enable and then the Enter key.
5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
6 After your system restarts, select Execute in the confirmation window and then press the Enter key.
✍
You can also disable the TPM and clear the TPM configuration in the BIOS setup screen.
!
Before enabling the TPM, be sure to set the power-on and hard disk passwords to protect against unauthorized modification of the TPM configuration.
If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.
You will not be able to access any TPM-protected data if you clear the TPM ownership. Before clearing the TPM configuration, be sure to make backup
copies of the TPM-protected data.
80
n N
Using Your VAIO Computer >
Using the TPM
To install the Infineon TPM Professional Package
Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click setup.exe in the C:\Infineon folder to install the
package.
To install this package, you must have administrative rights on the computer.
!
You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore
any TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people.
To initialize and configure the TPM
See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon
Security Platform Solution, and Help.
!
The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out
of your data maintenance and management.
81
n N
Using Peripheral Devices >
Using Peripheral Devices
You can add functionality to your VAIO computer by using the various ports on the computer.
❑Connecting a Docking Station (page 82)
❑Connecting External Speakers or Headphones (page 90)
❑Connecting an External Display (page 91)
❑Selecting Display Modes (page 100)
❑Using the Multiple Monitors Function (page 102)
❑Connecting an External Microphone (page 105)
❑Connecting a USB Device (page 106)
❑Connecting an i.LINK Device (page 108)
82
n N
Using Peripheral Devices >
Connecting a Docking Station
Connecting a Docking Station
Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external
display.
A docking station is not supplied with your computer and is available as an optional accessory.
83
n N
Using Peripheral Devices >
Connecting a Docking Station
Locating Ports on the Docking Station
!
The docking station can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the docking station
and the AC outlet while using the docking station. This may cause data damage or hardware malfunctions.
Simultaneous use of the HDMI output port on your computer and the DVI-D port or the MONITOR port on the docking station is not possible.
ADC IN indicator
Illuminates when the docking station is powered.
BIN USE indicator (page 87)
CUNDOCK button (page 87)
DDC IN port (page 84)
ENetwork (Ethernet) port (1000BASE-T / 100BASE-TX /
10BASE-T) (page 55)
FHi-Speed USB (USB 2.0) ports *1 (page 106)
GDVI-D port *2 (page 92)
HMONITOR port (page 92)
*1 Support high-/full-/low- speeds.
*2 Functional only when your computer is in SPEED mode.
84
n N
Using Peripheral Devices >
Connecting a Docking Station
Attaching Your Computer to the Docking Station
!
Be sure to install the battery pack before attaching your computer to the docking station.
To attach your computer to the docking station
!
Use the AC adapter supplied with your computer.
Do not move your computer while it is attached to the docking station. This may detach the docking station and cause damage to both units.
1 Disconnect all peripherals from the computer.
2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the docking station (4).
4 Unfold the docking station cover.
85
n N
Using Peripheral Devices >
Connecting a Docking Station
5 Slide open the docking station connector cover on the bottom of the computer.
6 Align the rear bottom corners of the computer with the guides on the docking station.
86
n N
Using Peripheral Devices >
Connecting a Docking Station
7 Gently push down the computer until it clicks into place.
8 Turn on the computer.
87
n N
Using Peripheral Devices >
Connecting a Docking Station
Disconnecting Your Computer from the Docking Station
!
Make sure that no devices connected to the docking station are in use before disconnecting your computer.
Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator
is lit may result in loss of unsaved data or a failure of the computer.
When the battery pack is running out of power, disconnecting your computer from the docking station may result in loss of unsaved data.
Do not disconnect your computer from the docking station during video playback. Be sure to close video playback software before disconnection.
Once you have completed the steps in To disconnect your computer from the docking station (page 88), be sure to take your computer off the docking
station. Use of the computer while on the docking station may cause unstable operations.
88
n N
Using Peripheral Devices >
Connecting a Docking Station
To disconnect your computer from the docking station
1 Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off.
✍
If the IN USE indicator is unlit, you do not have to press the UNDOCK button.
Pressing the UNDOCK button while your computer is in a power saving mode brings the computer to Normal mode first, and then initiates the
disconnection process.
!
Once you have placed your computer back in Normal mode, be sure to take your computer off the docking station. Use of the computer while on the
docking station may cause unstable operations.
89
n N
Using Peripheral Devices >
Connecting a Docking Station
2 Lift the computer off the docking station.
3 Close the docking station connector cover on the bottom of the computer.
Alternatively, you can disconnect the computer from the docking station as follows:
1 Click Start, the arrow next to the Lock button, and Undock.
2 Make sure that a message balloon appears and the IN USE indicator light turns off. Then lift the computer off the docking
station.
3 Close the docking station connector cover on the bottom of the computer.
!
It is extremely important that you close the docking station connector cover after disconnecting your computer from the docking station. If the cover
is left open, dust may get inside and damage the computer.
✍
To disconnect the docking station completely from AC power, unplug the AC adapter.
90
n N
Using Peripheral Devices >
Connecting External Speakers or Headphones
Connecting External Speakers or Headphones
You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.
To connect external speakers
✍
Make sure your speakers are designed for computer use.
!
Turn down the volume of the speakers before you turn them on.
Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).
91
n N
Using Peripheral Devices >
Connecting an External Display
Connecting an External Display
You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.
!
While your computer is in SPEED mode (using the NVIDIA video controller), the window stating that an external display is detected does not appear
when you connect the external display to the computer for the first time. To change the display output to the external display, press the Fn+F7 keys.
The screen resolution of your external display may change when you switch between the performance modes.
✍
Connect the power cord of your external display after connecting all other cables.
92
n N
Using Peripheral Devices >
Connecting an External Display
Connecting a Computer Display
You can connect a computer display (monitor) either directly to your computer or via the optional docking station.
To connect a computer display
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
The HDMI output port on your computer and the DVI-D port on the docking station are functional only when your computer is in SPEED mode.
If you connect an HDMI cable to the HDMI output port on your computer or a display cable to the DVI-D port on the docking station when your computer
is in STAMINA mode, a confirmation window appears. Follow the on-screen instructions to change the performance mode to SPEED mode.
1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 If you want to connect an analog monitor, plug the display cable (2) into the monitor port (3) a on the computer or on the
docking station.
93
n N
Using Peripheral Devices >
Connecting an External Display
3 If you want to connect a TFT/DVI monitor, plug the display cable (2) to an HDMI to DVI-D adapter (3) and plug one end
of the HDMI cable (4) to the HDMI to DVI-D adapter (3) and the other end to the HDMI output port (5) on the computer,
or plug the display cable(2) into the DVI-D port on the docking station.
4 If the external computer display is equipped with an HDMI input port, plug one end of an HDMI cable to the HDMI output
port on the computer and the other end to the HDMI input port on the computer display.
!
Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of
copyright protection, which enables you to play and view a wide variety of copyright protected, high-quality contents. To view the copyright protected
contents, connect an HDCP-compliant monitor to the HDMI output port on your computer or the DVI-D port on the docking station. If your computer
has a non-compliant monitor connected, you will not be able to play or view any copyright protected contents.
✍
DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI port that supports only digital video signals (no analog video signals). It has 24 pins.
A DVI-I (Digital Visual Interface - Integrated) port supports digital video and analog video signals. It has 29 pins.
94
n N
Using Peripheral Devices >
Connecting an External Display
Connecting a Multimedia Computer Display
You can connect a multimedia computer display that includes built-in speakers and a microphone either directly to your
computer or via the optional docking station.
To connect a multimedia computer display
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
1 Plug the power cord of your multimedia computer display (1) into an AC outlet.
2 Plug the display cable (2) into the monitor port (3) a on the computer or on the docking station.
3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
4 Plug the microphone cable (6) into the microphone jack (7) m on the computer.
95
n N
Using Peripheral Devices >
Connecting an External Display
96
n N
Using Peripheral Devices >
Connecting an External Display
Connecting a TV
You can connect a TV with an HDMI input port to your computer.
To connect a TV to your computer
!
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For the detailed instructions, see
How do I change the sound output device? (page 197).
The HDMI output port is functional only when your computer is in SPEED mode.
If you connect an HDMI cable to the HDMI output port when your computer is in STAMINA mode, a confirmation window appears. Follow the on-screen
instructions to change the performance mode to SPEED mode.
1 Plug the power cord of your TV (1) into an AC outlet.
2 Plug one end of an HDMI cable (2) to the HDMI output port (3) on the computer and the other end to the TV.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.
97
n N
Using Peripheral Devices >
Connecting an External Display
!
If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device
driver provided by Sony for updates.
✍
See the manual that came with your TV for more information on installation and use.
The HDMI cable carries both video and audio signals.
98
n N
Using Peripheral Devices >
Connecting an External Display
Additionally, you can connect a high-quality home theater receiver or other surround sound decoder devices between your
computer and TV using an HDMI connection.
To connect a high-quality digital sound output device between your computer and a TV
!
Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or
surround sound decoder device first.
To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For the detailed instructions, see
How do I change the sound output device? (page 197).
The HDMI output port is functional only when your computer is in SPEED mode.
If you connect an HDMI cable to the HDMI output port when your computer is in STAMINA mode, a confirmation window appears. Follow the on-screen
instructions to change the performance mode to SPEED mode.
1 Turn on the TV and set its input to the HDMI input.
2 Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.
3 Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device
and the other end to the HDMI output port on the computer.
4 Press the Fn F7+ keys to change the display output to the connected TV.
✍
You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video? (page 187) for the detailed
procedure.
With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of
any connected devices.
99
n N
Using Peripheral Devices >
Connecting an External Display
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking
station.
To connect a projector
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug a display cable (2) into the monitor port (3) a on the computer or on the docking station.
3 Plug an audio cable (4) into the headphones jack (5) i on the computer.
4 Plug the display cable and the audio cable into the port and jack on the projector (6).
100
n N
Using Peripheral Devices >
Selecting Display Modes
Selecting Display Modes
When an external display is connected, you can select either your computer screen or the connected display to use as the
primary monitor.
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors
Function (page 102) for more information.
101
n N
Using Peripheral Devices >
Selecting Display Modes
To select a display
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
The screen resolution of your external display may change when you switch between the performance modes.
✍
For selecting a video controller, see Selecting Performance Modes (page 111).
You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.
Turn on the external display before turning on your computer.
❑When using the Intel Graphics Media Accelerator (STAMINA mode)
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
3 Follow the on-screen instructions to change the settings.
❑When using the NVIDIA video controller (SPEED mode)
1 Click Start and Control Panel.
2 Click Additional Options.
3 Click NVIDIA Control Panel.
4 Select the display setup option under Display.
5 Follow the on-screen instructions to change the settings.
102
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display connected to the monitor port, your computer screen and the external display can function as a
single desktop.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
103
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
To use the Multiple Monitors function
!
The monitor port on your computer is not accessible when the computer is attached to the docking station.
The screen resolution of your external display may change when you switch between the performance modes.
✍
For selecting a video controller, see Selecting Performance Modes (page 111).
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function. Otherwise, the computer
may not return to Normal mode.
If you set different colors on each display, do not expand a single window across two displays. Otherwise, your software may not work properly.
Set fewer colors or a lower resolution for each display.
104
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
❑When using the Intel Graphics Media Accelerator (STAMINA mode)
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
3 Follow the on-screen instructions to change the settings.
❑When using the NVIDIA video controller (SPEED mode)
1 Click Start and Control Panel.
2 Click Adjust screen resolution under Appearance and Personalization.
3 2Right-click the number monitor and select Attached.
4 Click OK.
At the confirmation prompt, click Yes.
✍
You can also change one of the button assignments to activate the Multiple Monitors function with the S VAIO Control Center. For details on the S
buttons, see Using Special-function Buttons (page 32).
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors function.
105
n N
Using Peripheral Devices >
Connecting an External Microphone
Connecting an External Microphone
If you use a sound input device (for example, to chat over the Internet), you need to connect an external microphone (not
supplied).
To connect an external microphone
Plug the microphone cable (1) into the microphone jack (2) m.
✍
Make sure your microphone is designed for computer use.
106
n N
Using Peripheral Devices >
Connecting a USB Device
Connecting a USB Device
You can connect a Universal Serial Bus (USB) device to your computer, such as a mouse, floppy disk drive, speaker, and
printer.
To connect a USB device
1 Choose the USB port (1) you prefer to use.
2 Plug the USB device cable (2) into the USB port.
107
n N
Using Peripheral Devices >
Connecting a USB Device
Notes on connecting a USB device
❑You may need to install the driver software supplied with your USB device before use. See the manual that came with the
USB device for more information.
❑Be sure to use a USB printer compatible with your version of Windows to print documents.
❑For information on how to remove a USB device, see the manual that came with the device.
❑To protect your computer and/or USB devices from damage, observe the following:
❑When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact.
❑Do not put the computer into a bag or carrying case when it has USB devices connected.
❑The optional USB floppy disk drive may not be available in some countries or regions.
108
n N
Using Peripheral Devices >
Connecting an i.LINK Device
Connecting an i.LINK Device
Your computer is equipped with an i.LINK port which you can use to connect an i.LINK device, such as a digital video
camcorder.
✍
i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK
connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK
connection can communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating
conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm
their operating system compatibility and required operating conditions.
Notes on connecting i.LINK devices
❑The i.LINK port on your computer does not supply power to an external device. If the external device requires external
power, be sure to connect it to a power source.
❑The i.LINK port supports transfer rates up to 400 Mbps. However, the actual transfer rate depends on the transfer rate of
the external device.
❑The optional i.LINK cables may not be available in some countries or regions.
❑An i.LINK connection with other compatible devices is not fully guaranteed.
❑The i.LINK connection may not be available depending on the software applications, operating system, and i.LINK-
compatible devices you use. See the manual that came with your software for more information.
❑Check the working conditions and operating system compatibility of i.LINK-compatible PC peripherals (for example, an
HDD or a CD-RW drive) before you connect them to your computer.
109
n N
Using Peripheral Devices >
Connecting an i.LINK Device
Connecting a Digital Video Camcorder
To connect a digital video camcorder
Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/
Out port (3) on the digital video camcorder.
✍
The connection procedure varies depending on your compatible i.LINK device. See the manual that came with the device for more information.
You cannot access the pictures stored on a Memory Stick when using an i.LINK connection.
Switch the video format between NTSC and PAL with the software that you use.
110
n N
Customizing Your VAIO Computer >
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn
how to use and customize the look of your Sony software and utilities.
❑Selecting Performance Modes (page 111)
❑Setting the Password (page 113)
❑Using the VAIO Control Center (page 125)
❑Using the Power Saving Modes (page 126)
❑Using the VAIO Power Management (page 131)
❑Configuring Your Modem (page 133)
❑Protecting the Hard Disk (page 134)
111
n N
Customizing Your VAIO Computer >
Selecting Performance Modes
Selecting Performance Modes
Your computer is equipped with the performance selector switch (1) to select a performance mode for lower power
consumption or faster performance.
!
While your computer is in SPEED mode (using the NVIDIA video controller), the window stating that an external display is detected does not appear
when you connect the external display to the computer for the first time. To change the display output to the external display, press the Fn+F7 keys.
Be sure to close all open applications before changing a performance mode. If not, you may lose any unsaved data.
During the switching process, your computer screen becomes dark and may temporarily show some noise or flicker. This is normal and does not
indicate a malfunction.
To cancel the switching process, set the performance selector switch back to its original position.
112
n N
Customizing Your VAIO Computer >
Selecting Performance Modes
❑STAMINA mode
Uses the Intel Graphics Media Accelerator and disables some hardware devices on your computer to conserve battery
power.
❑SPEED mode
Uses the NVIDIA video controller to provide faster performance.
!
The HDMI output port on your computer and the DVI-D port on the docking station are functional only when the computer is in SPEED mode.
✍
You can find the current performance mode by the indicator lights on either side of the performance selector switch.
113
n N
Customizing Your VAIO Computer >
Setting the Password
Setting the Password
In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer:
the power-on password and the hard disk password.
The hard disk password is not available on models with two built-in solid state drives in RAID configuration.
See the specifications to find out about configuration of your computer.
Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start
your computer. The power-on password allows you to protect your computer from unauthorized access.
The hard disk password provides additional security for the data stored on your built-in storage device. If you set the hard
disk password, other users will not be able to access the data without knowing the password, even if the password-protected
built-in storage device is removed from your computer and is installed in another computer.
114
n N
Customizing Your VAIO Computer >
Setting the Password
Adding the Power-on Password
The power-on password is provided to protect your computer from unauthorized access.
There are two types of the power-on passwords: the machine password and the user password. The machine password is
provided for users with administrative rights on the computer to change all the setup options in the BIOS setup screen, as
well as to start the computer. The user password is provided for the standard users to allow for changing some of the BIOS
setup options, as well as starting the computer. To set the user password, you must first set the machine password.
!
Once you have set the power-on password, you cannot start your computer without entering the password. Be sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for service to reset the password.
✍
If you have set the power-on password in conjunction with the fingerprint authentication function, you can substitute fingerprint authentication for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 68).
115
n N
Customizing Your VAIO Computer >
Setting the Password
To add the power-on password (machine password)
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < , or key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
4 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5 Select Password when Power On under Security and press the Enter key.
6 Change the setting from Disabled to Enabled.
7 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
116
n N
Customizing Your VAIO Computer >
Setting the Password
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Enter the machine password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
117
n N
Customizing Your VAIO Computer >
Setting the Password
Changing/Removing the Power-on Password
To change or remove the power-on password (machine password)
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Enter the machine password and press the Enter key.
4 Press the < , or key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
118
n N
Customizing Your VAIO Computer >
Setting the Password
To change or remove the power-on password (user password)
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Enter the user password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
119
n N
Customizing Your VAIO Computer >
Setting the Password
Adding the Hard Disk Password
The hard disk password provides additional security for the data stored on your built-in storage device. If you enable the hard
disk password, this adds an extra level of security.
When adding the hard disk password, you must set both the master and user passwords. The master password is provided
for users with administrative rights on the computer to reset the user password in the BIOS setup screen. The user password
is provided to lock your built-in storage device. Once you set the user password, you will have to enter the password along
with the power-on password (if set), after the VAIO logo appears.
!
You cannot start your computer with the master password.
If you forget the master password or the keyboard fails, which is critical to password entry, no bypass is possible and the data stored on the built-in
storage device will not be accessible. There is NO RESET of this password. You will have to replace the built-in storage device at your own expense and
lose all the data originally stored on the device. Be sure to write down the master password and keep it safe and private from other people.
✍
If you have set the hard disk password in conjunction with the fingerprint authentication function, you can substitute fingerprint authentication for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 68).
120
n N
Customizing Your VAIO Computer >
Setting the Password
To add the hard disk password
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4 Select Enter Master and User Passwords and press the Enter key.
5 Select Continue on the warning screen and press the Enter key.
6 Enter the master password twice and press the Enter key.
The password should be up to 32 alphanumeric characters (including spaces) long.
7 Enter the user password twice and press the Enter key.
The password should be up to 32 alphanumeric characters (including spaces) long.
8 At the confirmation prompt, press the Enter key.
9 Press the Esc key and then the < or , key to select the tab.Exit
10 Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
121
n N
Customizing Your VAIO Computer >
Setting the Password
Changing/Removing the Hard Disk Password
To change the hard disk password
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4 Select Change Master Password or Change User Password and press the Enter key.
5 Enter the current password once and then a new password twice.
6 Press the Enter key.
7 Press the Enter key when the success message appears.
8 Press the Esc key and then the < or , key to select the tab.Exit
9 Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
122
n N
Customizing Your VAIO Computer >
Setting the Password
To remove the hard disk password
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4 Select Enter Master and User Passwords and press the Enter key.
5 Enter the current password for Enter Current Hard Disk Master Password and press the Enter key.
6 Press the Enter key without entering any letter for the remaining fields.
7 Press the Enter key when the success message appears.
8 Press the Esc key and then the < or , key to select the tab.Exit
9 Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
123
n N
Customizing Your VAIO Computer >
Setting the Password
Adding the Windows Password
The Windows password comes in handy when you have to share a single computer with other people. By setting the Windows
password, you can protect your user account from unauthorized access.
Entry of the Windows password will be prompted after you select your user account.
!
Be sure not to forget the password. Write down your password and keep it safe and private from other people.
✍
If you have set the Windows password in conjunction with the fingerprint authentication function, you can substitute fingerprint authentication for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 68).
To add the Windows password
1 Click Start and Control Panel.
2 Click User Accounts and Family Safety or User Accounts.
3 Click User Accounts.
4 Click Create a password for your account under Make changes to your account.
5 In the New password and Confirm new password fields, enter the password for your account.
6 Click Create password.
✍
See Windows Help and Support for more information on the Windows password.
124
n N
Customizing Your VAIO Computer >
Setting the Password
Changing/Removing the Windows Password
To change the Windows password
1Click Start and Control Panel.
2Click User Accounts and Family Safety or User Accounts.
3Click User Accounts.
4Click Change your password.
5In the Current password field, enter your current password.
6In the New password and Confirm new password fields, enter a new password.
7Click Change password.
To remove the Windows password
1Click Start and Control Panel.
2Click User Accounts and Family Safety or User Accounts.
3Click User Accounts.
4Click Remove your password.
5In the Current password field, enter the current password that you want to remove.
6Click Remove password.
125
n N
Customizing Your VAIO Computer >
Using the VAIO Control Center
Using the VAIO Control Center
The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.
To use the VAIO Control Center
1Click Start, All Programs, and VAIO Control Center.
2Select the desired control item and change the settings.
3Once finished, click OK.
The setting of the desired item has been changed.
✍
For more information about each option, see the help file included with the VAIO Control Center.
Some of the control items will not be visible if you open the VAIO Control Center as a standard user.
Using the VAIO Status Monitor
The VAIO Status Monitor utility allows you to check various settings, such as the power management settings, security
settings, and current usage of devices, in the VAIO Status Monitor window.
To display the VAIO Status Monitor window
1Click Start, All Programs, and VAIO Control Center.
2Click System Information and VAIO Status Monitor.
3Click Advanced in the right pane.
✍
You can change the settings for certain items in the VAIO Status Monitor window. To change the settings, select the desired item and click Settings.
126
n N
Customizing Your VAIO Computer >
Using the Power Saving Modes
Using the Power Saving Modes
You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode,
your computer has two distinct power saving modes: Sleep and Hibernate. When using battery power, you should be aware
that the computer will automatically enter Hibernate mode if the remaining battery life becomes short, regardless of the power
management setting you select.
!
If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and
install a fully charged battery pack.
Using Normal Mode
This is the normal state of the computer when it is in use. The green power indicator light is lit in this mode.
127
n N
Customizing Your VAIO Computer >
Using the Power Saving Modes
Using Sleep Mode
Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption
mode. The orange power indicator light blinks slowly in this mode.
!
If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or
turn it off.
To activate Sleep mode
Click Start, the arrow next to the Lock button, and Sleep.
✍
When your computer is in Sleep mode, you cannot insert a disc.
Your computer comes out of Sleep mode quicker than out of Hibernate mode.
Sleep mode uses more power than Hibernate mode.
!
If the battery runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
To return to Normal mode
❑Press any key.
❑Press the power button on your computer.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.
✍
You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming
preference will be lost if you remove both the AC adapter and the battery pack. See Using the VAIO Control Center (page 125).
128
n N
Customizing Your VAIO Computer >
Using the Power Saving Modes
If the computer is not used for a certain period of time, it will enter Sleep mode. To modify this, you can change the Sleep
mode settings.
To change the Sleep mode settings
1Right-click the power status icon on the taskbar and select Power Options.
2Click Change plan settings under the current power plan.
3Change the time to place the computer into Sleep mode and click Save Changes.
129
n N
Customizing Your VAIO Computer >
Using the Power Saving Modes
Using Hibernate Mode
In Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the
battery runs out of power, no data will be lost. The power indicator light is unlit in this mode.
✍
If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode.
To activate Hibernate mode
Press the Fn F12+ keys.
The computer enters Hibernate mode.
Alternatively, you can click Start, the arrow next to the Lock button, and Hibernate to place the computer into Hibernate
mode.
✍
When your computer is in Hibernate mode, you cannot insert a disc.
Hibernate mode requires more time than Sleep mode to be activated.
Hibernate mode uses less power than Sleep mode.
!
Do not move your computer before its power indicator light turns off.
130
n N
Customizing Your VAIO Computer >
Using the Power Saving Modes
To return to Normal mode
Press the power button.
The computer returns to its normal state.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically.
✍
It takes more time to return to Normal mode from Hibernate mode than from Sleep mode.
You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming
preference will be lost if you remove both the AC adapter and the battery pack. See Using the VAIO Control Center (page 125).
131
n N
Customizing Your VAIO Computer >
Using the VAIO Power Management
Using the VAIO Power Management
Power management helps you set up power plans for running on AC or battery power to suit your requirements for power
consumption.
The VAIO Power Management is a software application developed exclusively for VAIO computers. With this software
application, you can enhance the Windows power management functions to ensure better operation of your computer and
longer battery life. See the help file included with the software for more information.
Selecting a Power Plan
When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you
are using at that time, for example, AC power. Click this icon to display the window that shows your power status.
The VAIO Power Management function is added to the Windows Power Options.
To select a power plan
1Right-click the power status icon on the taskbar and select Power Options.
2Select your desired power plan.
To change the power plan settings
1Click Change plan settings under your desired power plan in the Power Options window.
Change the Sleep mode and display settings as needed.
2If you need to change the advanced settings, click Change advanced power settings and go to step 3.
Otherwise, click Save changes.
3Click the VAIO Power Management tab.
Change the settings for each item.
4Click OK.
132
n N
Customizing Your VAIO Computer >
Using the VAIO Power Management
VAIO Power Management Viewer
You can view performance with the power plan that was modified with the VAIO Power Management.
To start the VAIO Power Management Viewer
1Click Start, All Programs, and VAIO Control Center.
2Click Power Management and VAIO Power Management Viewer.
133
n N
Customizing Your VAIO Computer >
Configuring Your Modem
Configuring Your Modem
Follow the steps below to make the settings before using the built-in modem.
1Click Start and Control Panel.
2Click Hardware and Sound.
3Click Phone and Modem Options.
The Location Information window appears.
4Enter the required information, and then click OK.
The Phone and Modem Options window appears.
5Select your location on the Dialing Rules tab and click Edit.
The Edit Location window appears.
6Select your location under Country/region.
7Select Tone or Pulse for Dial using.
✍
Pulse dial may not be supported in some counties or regions.
8Enter an area code (if there is one).
In some countries or regions, you do not need to enter an area code.
If you need to dial a special number before accessing an outside line, enter the number for both To access an outside
line for local calls, dial and To access an outside line for long-distance calls, dial.
9Click OK.
The Phone and Modem Options window appears.
10 Click OK.
134
n N
Customizing Your VAIO Computer >
Protecting the Hard Disk
Protecting the Hard Disk
If your computer is equipped with a built-in hard disk drive, then it has the VAIO HDD Protection utility preinstalled for
customizing your settings for protecting your hard disk drive against shock hazards. You can select the sensitivity level of the
built-in shock sensor to set the appropriate protection level.
See the specifications to find out about the configuration of your computer.
!
Be aware that the solid state drive is not included in the scope of the VAIO HDD Protection utility.
Activating VAIO HDD Protection
To protect your hard disk drive against shock hazards, you must first activate the VAIO HDD Protection.
To activate VAIO HDD Protection
1Click Start, All Programs, and VAIO Control Center.
2Click Security and Hard Disk Drive Protection Settings.
3Select the Activate hard disk drive protection check box.
4Select one of the desired sensitivity level.
5Click OK.
For more information, see the help file included with the software.
!
The VAIO HDD Protection is designed to minimize possibilities of damage to hard disk drives and user data. It does not ensure 100% data protection
under any circumstances.
Hard disk drive protection is disabled before Windows launches, and during a shift to Hibernate or Sleep mode, system recovery, and system shutdown.
135
n N
Upgrading Your VAIO Computer >
Upgrading Your VAIO Computer
Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid
invalidation of the warranty during your product warranty period, we recommend that:
❑You should contact your dealer to install a new memory module.
❑You should not install it yourself, if you are not familiar with upgrading memory on a computer.
❑You should not touch the connectors or open the memory module compartment cover.
Contact VAIO Helpdesk if you need assistance.
The type of module and the amount of memory installed on your computer may differ depending on the model you purchased.
See the specifications to find out about the configuration of your computer.
136
n N
Upgrading Your VAIO Computer >
Adding and Removing Memory
Adding and Removing Memory
If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional
memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages.
Notes on adding/removing memory modules
❑Be sure to place your computer on a flat surface before adding or removing memory modules.
❑Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This
damage may void your manufacturer's warranty.
❑Only use memory modules that are compatible with your computer. If a memory module is not detected by the computer
or the Windows operating system becomes unstable, contact the sales dealer or the manufacturer of your memory
module.
❑Electrostatic discharge (ESD) can damage electronic components. Before touching a memory module, ensure the
following:
❑The procedures described in this document assume user familiarity with the general terminology associated with
personal computers and with the safety practice and regulatory compliance requirements for using and modifying
electronic equipment.
❑Turn off your computer and disconnect it from its power sources (battery pack and AC adapter) and from any
telecommunication links, networks, or modems before you remove any cover or panel from the computer. Failure to
do so may result in personal injury or equipment damage.
❑ESD can damage memory modules and other components. Install the memory module only at an ESD workstation.
If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold
static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal
portion of the chassis while performing the procedure.
137
n N
Upgrading Your VAIO Computer >
Adding and Removing Memory
❑Do not open the memory module package before you are ready to change the module. The package protects the
module from ESD.
❑Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD.
❑Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your
computer will result in damage to the computer and any repair costs will not be covered by the warranty.
❑Do not place the memory module in a location subject to:
❑Heat sources such as radiators or air ducts
❑Direct sunlight
❑Excessive dust
❑Mechanical vibration or shock
❑Strong magnets or speakers that are not magnetically shielded
❑Ambient temperature of more than 35°C or less than 5°C
❑High humidity
❑Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the
components and circuit boards inside your computer.
138
n N
Upgrading Your VAIO Computer >
Adding and Removing Memory
Removing and Installing a Memory Module
To change or add a memory module
1Shut down the computer and disconnect all peripheral devices.
2Unplug the computer and remove the battery pack.
3Wait about an hour until the computer cools down.
4Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module
compartment cover.
5Touch a metal object to discharge static electricity.
6Remove the currently installed memory module as follows:
❑Pull the latches in the direction of the arrows (1).
The memory module is released.
❑Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).
139
n N
Upgrading Your VAIO Computer >
Adding and Removing Memory
7Remove the new memory module from its packaging.
8Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any other components on the motherboard.
If you want to install only one memory module, be sure to use the lower slot.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.
9Replace the memory module compartment cover.
10 Tighten the screw on the bottom of the computer.
11 Reinstall the battery pack and turn on the computer.
140
n N
Upgrading Your VAIO Computer >
Adding and Removing Memory
Viewing the Amount of Memory
To view the amount of memory
1Turn on the computer.
2Click Start, All Programs, and VAIO Control Center.
3Click System Information and System Information.
You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the
installation procedure and restart the computer.
141
n N
Precautions >
Precautions
This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.
❑Handling the LCD Screen (page 142)
❑Using the Power Source (page 143)
❑Handling Your Computer (page 144)
❑Handling the Built-in Camera (page 147)
❑Handling Discs (page 148)
❑Using the Battery Pack (page 149)
❑Using Headphones (page 150)
❑Handling the Memory Stick (page 151)
❑Handling the Built-in Storage Device (page 152)
❑Using Fingerprint Authentication (page 153)
❑Using the TPM (page 154)
142
n N
Precautions >
Handling the LCD Screen
Handling the LCD Screen
❑Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using your computer
near a window.
❑Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a malfunction.
❑Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a
malfunction. When the computer returns to normal temperature, the screen returns to normal.
❑A residual image may appear on the LCD screen if the same image is displayed for a long period of time. The residual
image disappears after a while. You can use a screen saver to prevent residual images.
❑The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.
❑The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright
points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing
process and does not indicate a malfunction.
❑Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the surface of the LCD screen.
❑Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options
available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising
from changes to the settings.
❑Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it.
143
n N
Precautions >
Using the Power Source
Using the Power Source
See the specifications to find out about the configuration of your computer.
❑Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder.
❑You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by
sudden power surges, in an electrical storm, for example.
❑Do not place heavy objects on the power cord.
❑To disconnect the cord, pull it out by holding the plug. Never pull the cord itself.
❑Unplug your computer from the AC outlet if you are not planning to use the computer for a long period of time.
❑Make sure that the AC outlet is easily accessible.
❑When the AC adapter is not used, unplug it from the AC outlet.
❑Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may
cause a malfunction.
144
n N
Precautions >
Handling Your Computer
Handling Your Computer
❑Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your
computer.
❑If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery
pack. You may want to have the computer checked by qualified personnel before operating it again.
❑Do not drop your computer or place any objects on top of the computer.
❑Do not place your computer in a location subject to:
❑Heat sources, such as radiators or air ducts
❑Direct sunlight
❑Excessive dust
❑Moisture or rain
❑Mechanical vibration or shock
❑Strong magnets or speakers that are not magnetically shielded
❑Ambient temperature of more than 35°C or less than 5°C
❑High humidity
❑Do not place electronic equipment near your computer. The electromagnetic field of the equipment may cause the
computer to malfunction.
❑Use your computer on a solid, stable surface.
❑Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as
rugs, blankets, couches, or beds, or near draperies that may block its air vents.
145
n N
Precautions >
Handling Your Computer
❑Do not use your computer directly on your lap. The temperature of the base of the unit will rise during normal operation
and over time could result in discomfort or burns.
❑Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs,
relocate the computer a suitable distance away from the set.
❑Use only specified peripheral equipment and interface cables. Otherwise, problems may occur.
❑Do not use cut or damaged connection cables.
❑If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In
this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact
VAIO Helpdesk.
❑Make sure you disconnect the AC adapter and remove the battery pack before cleaning your computer.
❑To avoid losing data when your computer is damaged, back up your data regularly.
146
n N
Precautions >
Handling Your Computer
❑Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD
screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to
malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry
the computer with the lid open, be sure to hold the computer with both hands.
❑Use a carrying case specially designed to carry your computer.
147
n N
Precautions >
Handling the Built-in Camera
Handling the Built-in Camera
❑Do not touch the lens protection cover of the built-in camera, as it may cause scratches on the cover and such scratches
will appear on the captured images.
❑Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may
cause the camera to malfunction.
❑The built-in camera is disabled while videos or still images are imported from an i.LINK-compatible device connected to
the i.LINK port.
❑Clean the lens protection cover of the built-in camera with a blower brush or a soft brush. If the cover is extremely dirty,
wipe it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure.
148
n N
Precautions >
Handling Discs
Handling Discs
❑Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole,
as shown below:
❑Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,
commercially available cleaners, or anti-static spray) which may cause damage to the disc.
❑For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out.
❑If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from
the center out. Wipe off any remaining moisture with a dry soft cloth.
❑Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage.
149
n N
Precautions >
Using the Battery Pack
Using the Battery Pack
❑Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight.
❑Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
❑Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time.
❑For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that
meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function
with a genuine Sony battery pack.
❑While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for
concern.
❑Keep the battery pack away from all sources of heat.
❑Keep the battery pack dry.
❑Do not open or try to disassemble the battery pack.
❑Do not expose the battery pack to any mechanical shock, such as dropping it on a hard surface.
❑If you are not using your computer for a long period of time, remove the battery pack from the computer to prevent damage
to the battery pack.
❑If you have not used the battery pack for a considerable amount of time, the remaining battery life may become short.
However, this is normal and does not indicate a malfunction, because the battery pack will gradually discharge over time
even when not in use. Connect the AC adapter to your computer and recharge the battery pack before using the computer
again.
❑You do not need to discharge the battery pack before recharging.
❑If the battery pack quickly runs out of power after fully charged, it may be reaching the end of its life and should be
replaced.
150
n N
Precautions >
Using Headphones
Using Headphones
❑Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at
pedestrian crossings.
❑Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
151
n N
Precautions >
Handling the Memory Stick
Handling the Memory Stick
❑Do not touch the Memory Stick connector with your finger or metallic objects.
❑Use only the adhesive label supplied with the Memory Stick as a label.
❑Do not bend, drop, or expose the Memory Stick.
❑Do not disassemble or modify the Memory Stick.
❑Do not let the Memory Stick get wet.
❑Do not use or store the Memory Stick in a location subject to:
❑Static electricity
❑Electrical noise
❑Extremely high temperatures, such as in a car parked in the sun
❑Direct sunlight
❑High humidity
❑Corrosive substances
❑Use the storage case supplied with the Memory Stick.
❑Be sure to make a backup copy of your valuable data.
❑Keep the Memory Stick and the Memory Stick adaptors out of reach of children. There is a risk of swallowing them.
❑When using the Memory Stick Duo, do not use a fine-tipped pen to write on the label adhered to the Memory Stick Duo.
Exerting pressure on the media may damage internal components.
152
n N
Precautions >
Handling the Built-in Storage Device
Handling the Built-in Storage Device
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be
restored. To prevent losing data, you should be careful when handling your computer.
Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
To avoid damaging your hard disk drive
❑Do not subject your computer to sudden movements.
❑Keep your computer away from magnets.
❑Do not place your computer in a location subject to mechanical vibration or in an unstable position.
❑Do not move your computer while the power is on.
❑Do not turn off the power or restart your computer while reading or writing data to the hard disk drive.
❑Do not use your computer in a place subject to extreme changes in temperature.
❑Do not remove the hard disk drive from your computer.
To avoid damaging your solid state drive
❑Do not turn off the power or restart your computer while reading or writing data to the solid state drive.
❑Do not remove the solid state drive from your computer.
153
n N
Precautions >
Using Fingerprint Authentication
Using Fingerprint Authentication
❑The fingerprint authentication technology does not ensure complete user authentication or complete protection of your
data and hardware.
Sony assumes no liability for any problems and damages arising out of your use of or inability to use the fingerprint sensor.
❑The fingerprint recognition rate depends on your operating conditions and varies among individuals as well.
❑Be sure to make a backup copy of the data stored on the built-in storage device, especially in the encrypted archives
created with the File Safe feature, before sending your computer for repair.
Sony assumes no liability for any loss or modification of your data that might have occurred during the course of repair.
❑In case the built-in storage device has to be initialized, for example after the repair work, the fingerprint templates will be
lost. You will have to register them all over again.
❑The maintenance and management of data concerning fingerprint authentication must be carried out at your own risk.
Sony assumes no liability for any defects arising out of your data maintenance and management.
❑Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprint
data registered on the fingerprint sensor after erasing the data stored on your built-in storage device. See Erasing the
Registered Fingerprints (page 74) for the detailed procedure.
❑A fingerprint sensor may malfunction or be damaged if you scratch its surface with:
❑a solid or sharp-pointed object
❑fine objects, for example swiping a finger covered with dirt across the fingerprint sensor
❑Discharge static electricity from your finger by touching a metallic object especially during dry seasons (e.g. winter) before
scanning your fingerprint. Static electricity may cause the fingerprint sensor to malfunction.
154
n N
Precautions >
Using the TPM
Using the TPM
❑Although your computer is provided with the TPM security functions, these functions do not ensure complete protection
of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of the
functions.
❑After you have installed the Infineon TPM Professional Package, you need to set a few TPM passwords on your
computer. Without these passwords, you will not be able to restore any TPM-protected data. Be sure to write down the
passwords and keep them safe and private from other people.
❑Be sure to make backup copies of the latest emergency recovery archive file, emergency recovery token file, password
reset token file, and personal secret file and keep them safe and private from other people before sending your computer
for repair. The data stored in the TPM that is embedded on the motherboard may be lost or corrupted during the course
of repair.
❑During the course of repair, the TPM will also be replaced if the motherboard needs replacement. In such a case, use the
backup copies of the emergency recovery archive file, emergency recovery token file, password reset token file, and
personal secret file to restore the TPM configuration.
❑Be sure to make a backup copy of the data stored on the built-in storage device before sending your computer for repair.
The built-in storage device may be initialized and returned after the repair work and, in such a case, you will not be able
to restore the data on the device using the backup copies of the emergency recovery archive file, emergency recovery
token file, password reset token file, and personal secret file.
❑Make sure you set up the automatic backup operations after completing the TPM initialization wizard. If the window
containing the Run automatic backup now check box is displayed after the setup, select the check box and update the
backup files. The restore process using the backup files may fail if you do not set up the automatic backup operations.
❑The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability
for any defects arising out of your data maintenance and management.
156
n N
Troubleshooting >
❑Audio/Video (page 196)
❑Memory Stick (page 200)
❑Peripherals (page 201)
❑Docking Station (page 202)
157
n N
Troubleshooting >
Computer
Computer
What should I do if my computer does not start?
❑Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑Make sure the battery pack is installed properly and charged.
❑Disconnect all connected USB devices (if any), and then restart your computer.
❑Remove any extra memory modules you may have installed since purchase, and then restart your computer.
❑If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS
is plugged into a power source and turned on.
❑If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness
and contrast controls are adjusted correctly. See the manual that came with your display for more information.
❑Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC
adapter, and then press the power button to turn on your computer.
❑Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.
❑Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery
pack and AC adapter, which are supplied by Sony for your VAIO computer.
158
n N
Troubleshooting >
Computer
What should I do if the green power indicator light turns on but my screen remains blank?
❑Press the Alt+F4 keys several times to close the application window. An application error may have occurred.
❑Press the Ctrl+ +Alt Delete keys and click the arrow next to the Shut down button and Restart.
❑Press and hold the power button for more than four seconds to shut down your computer. Unplug the AC adapter and
leave the computer for about five minutes. Then plug the AC adapter and turn on the computer again.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
What should I do if my computer or software stops responding?
❑If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application
window.
❑If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and to turn off your computer.Shut Down
❑If your computer does not turn off, press the Ctrl+ +Alt Delete keys and click the arrow next to the Shut down button and
Shut Down.
If the Windows Security window appears, click Shut Down.
❑If your computer still does not turn off, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
❑Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC
adapter, and then press the power button to turn on your computer.
❑Try reinstalling the software.
❑Contact the software publisher or designated provider for technical support.
159
n N
Troubleshooting >
Computer
Why doesn't my computer enter Sleep or Hibernate mode?
Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or
Hibernate mode.
To restore your computer to Normal mode
1Close all open programs.
2Click Start, the arrow next to the Lock button, and Restart.
3If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and
Restart.
4If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
What should I do if the charge indicator light is blinking fast and my computer does not
start?
❑This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer
and remove the battery pack. Then reinstall the battery pack to the computer again. For details, see Installing the
Battery Pack (page 18).
❑If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the
battery pack and contact VAIO Helpdesk.
160
n N
Troubleshooting >
Computer
What should I do if a message appears notifying of either incompatibility or the improper
installation of the battery pack and my computer then enters Hibernate mode?
❑This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer
and remove the battery pack. Then reinstall the battery pack to the computer again. For details, see Installing the
Battery Pack (page 18).
❑If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the
battery pack and contact VAIO Helpdesk.
Why does the System Properties window display a slower CPU speed than the
maximum?
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation
purposes, System Properties may display the current CPU speed instead of the maximum speed.
What should I do if my computer does not accept my password and returns a message,
Enter Onetime Password?
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and
Windows will not start. Press and hold the power button for more than four seconds to check that the power indicator light
turns off. Wait for 10 or 15 seconds, then restart your computer and enter the correct password. When entering the password,
check that the Num lock and Caps lock indicators are unlit. If both or either of the lights is lit, press the Num Lk (or Num Lock)
key or the Caps Lock key to turn off the indicator before entering the password.
161
n N
Troubleshooting >
Computer
What should I do if my game software does not work or it keeps crashing?
❑Check the web site of the game if there are any patches or updates to download.
❑Make sure you have installed the latest video driver software.
❑On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is
not guaranteed.
What should I do if I cannot remember the power-on password?
If you have forgotten the power-on password, contact VAIO Helpdesk to reset it. A reset fee will be charged.
Why doesn't my screen turn off after the automatic turn-off time has passed?
The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your
screen to turn off.
Select a screen saver other than the VAIO original screen saver.
162
n N
Troubleshooting >
Computer
How can I change the boot device order?
You can use one of the BIOS functions to change the boot device order. Follow these steps:
1Turn on your computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3Press the < or , key to select Boot.
4Press the M or m key to select the drive whose boot device order you want to change.
5Press the F5 or F6 key to change the boot device order.
6Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
What should I do if I cannot boot my computer from the USB floppy disk drive connected
to the computer?
To boot your computer from the USB floppy disk drive, you need to change the boot device.
Turn on your computer and press the F11 key when the VAIO logo appears.
163
n N
Troubleshooting >
Computer
How do I reduce the volume of the recovery partition?
Your built-in storage device contains the recovery partition where the data for the system recovery is stored. If your computer
includes a solid state drive, you might want to reduce the volume of the recovery partition by following these steps:
1Insert a recovery disc into the optical disc drive while your computer is on, turn off the computer, and then turn it on once
again.
!
Use recovery disc(s) you created upon delivery of your computer.
2Select your keyboard layout from the drop-down list and click Next.
3Select your operating system and click Next.
4Click VAIO Recovery Center.
5Click Restore Complete System and Start.
6Select Skip and click Next.
You will be prompted to select whether or not to keep the VAIO Value-added contents.
7Select No and click Next.
8Follow the on-screen instructions.
!
The above procedure involves system recovery. The applications and data you added on the storage drive before reducing the volume of the recovery
partition will all be lost.
Once you have reduced the volume of the recovery partition, you need the recovery disc(s) for later system recovery.
164
n N
Troubleshooting >
Computer
How do I check the volume of the recovery partition?
Your built-in storage device contains the recovery partition where the data for the system recovery is stored. To check the
volume of the recovery partition, follow these steps:
1Click Start, right-click Computer, and select Manage.
2Click Disk Management under Storage in the left pane.
The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane.
165
n N
Troubleshooting >
System Security
System Security
How can I protect my computer against security threats, such as viruses?
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against
security threats, such as viruses, is to download and install the latest Windows updates regularly.
You can get important Windows updates by doing the following:
!
Your computer must be connected to the Internet to download the updates.
1Connect to the Internet.
2Double-click the Windows Security Alerts icon on the taskbar.
3Follow the on-screen instructions to set up automatic or scheduled updates.
How do I keep my antivirus software updated?
You can keep the McAfee software program current with the latest updates from McAfee, Inc.
To download and install the latest security updates, follow these steps:
!
Your computer must be connected to the Internet to download the updates.
1Click Start, All Programs, McAfee, and McAfee SecurityCenter.
2Click the button located at the upper left corner of the window to update the software.
3Follow the on-screen instructions to download updates.
See the help file included with your software program for more information.
166
n N
Troubleshooting >
Battery
Battery
How do I find the battery charging status?
You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 21) for more
information.
When is my computer using AC power?
When your computer is directly connected to the AC adapter, it uses AC power, even if the battery pack is installed.
When should I recharge the battery pack?
❑When the battery charge level falls below 10%.
❑When both the charge and power indicator lights blink.
❑When you have not used the battery pack for a long period of time.
When should I replace the battery pack?
If the battery pack quickly runs out of power after fully charged, it may be reaching the end of its life and should be replaced.
To check the battery charge capacity, see To check the battery charge capacity (page 23).
Should I be concerned that the installed battery pack is warm?
No, it is normal for the battery pack to be warm when it is powering your computer.
167
n N
Troubleshooting >
Battery
Can my computer enter Hibernate mode while using battery power?
Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices
prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering
Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 129) for information on
how you can manually activate Hibernate mode.
How can I conserve battery power when my computer is in Sleep mode?
The wake function of the Ethernet controller on your computer is enabled at the time of delivery. To conserve battery power
when the computer is in Sleep mode, you need to disable this function. Follow these steps:
1Click Start, Control Panel, Hardware and Sound, and Device Manager.
2Double-click the network adapters and Gigabit Network Connection.
3Click the tab for the power management settings and cancel the check box that allows the device to wake the computer.
4Click OK.
168
n N
Troubleshooting >
Built-in Camera
Built-in Camera
Why does the viewfinder show no images or poor-quality images?
❑The built-in camera cannot be shared by more than one software application. Exit the current application before launching
another.
❑The viewfinder may show some noise, for example horizontal streaks, if you view a rapid-moving object. This is normal
and does not indicate a malfunction.
❑If the problem persists, restart your computer.
Why are captured images poor in quality?
❑The images captured under the fluorescent light may show reflections of light.
❑A dark portion in captured images may appear as a noise.
❑If the lens protection cover is dirty, you cannot take a clear shot. Clean the cover. See Handling the Built-in Camera
(page 147).
What should I do if captured images contain dropped frames and audio interruptions?
❑The effect settings on your software application may cause dropped frames. See the help file included with your software
application for more information.
❑There may be more software applications running than your computer can handle. Exit the applications that you are not
currently using.
❑The power management function of your computer may be active. Check the CPU performance.
169
n N
Troubleshooting >
Built-in Camera
What should I do if movie playback shows dropped frames when my computer is running
on the battery?
The battery pack is running out of power. Connect your computer to an AC power source.
What should I do if captured images flicker?
This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output
frequency and shutter speed.
To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software
applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate
flicker noise.
Why is the video input from the built-in camera suspended for a few seconds?
The video input may be suspended for a few seconds if:
❑a shortcut key with the Fn key is used.
❑the CPU load increases.
This is normal and does not indicate a malfunction.
What should I do if my computer becomes unstable when it enters a power saving mode
while the built-in camera is in use?
If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting. To
change the setting, see Using the Power Saving Modes (page 126).
170
n N
Troubleshooting >
Internet
Internet
What should I do if my modem does not work?
❑Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack.
❑Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.
❑Make sure that the telephone number the program is dialing is correct.
❑Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are
compatible.)
❑Make sure the modem is the only device connected to your telephone line.
❑Follow these steps to check the settings:
1 Click Start and Control Panel.
2 Click Hardware and Sound.
3 Click Phone and Modem Options.
4 On the Modems tab, check that your modem is listed.
5 On the Dialing Rules tab, check the location information is correct.
171
n N
Troubleshooting >
Internet
Why is my modem connection slow?
Your computer is equipped with a V.92/V.90 compatible modem. Many factors may influence modem connection speed,
including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think
your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, do any of the following:
❑Ask your telephone company to verify your telephone line is free of any line noise.
❑If your problem is fax-related, make sure there are no problems with the fax machine you are calling and that it is
compatible with fax modems.
❑If you are having a problem connecting with your ISP, make sure the ISP is not experiencing technical problems.
❑If you have a second telephone line, try connecting the modem to that line.
172
n N
Troubleshooting >
Networking
Networking
What should I do if my computer cannot connect to a wireless LAN access point?
❑Connection capability is affected by distance and obstructions. You may need to move your computer away from
obstructions or closer to any access point you may be using.
❑Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.
❑Make sure power to the access point is on.
❑If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use
the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected on the WLAN tab in the VAIO Smart Network settings
window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models
only, is disabled by default.
❑Follow these steps to check the settings:
1Click Start and Control Panel.
2Click View network status and tasks under Network and Internet.
3Click Connect to a network to confirm that your access point is selected.
❑Make sure the encryption key is correct.
173
n N
Troubleshooting >
Networking
❑Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. To change the settings, follow these steps:
1Right-click the power status icon on the taskbar and select Power Options.
2Click Change plan settings under the current power plan.
3Click Change advanced power settings.
4Select the Advanced settings tab.
5Double-click Wireless Adapter Settings and Power Saving Mode.
6Select Maximum Performance from the drop-down list both for On battery and Plugged in.
174
n N
Troubleshooting >
Networking
What should I do if I cannot access the Internet?
❑Check the access point settings. See the manual that came with your access point for more information.
❑Make sure your computer and the access point are connected to one another.
❑Move your computer away from obstacles or closer to any access point you may be using.
❑Make sure your computer is properly configured for Internet access.
❑Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
connect to a wireless LAN access point? (page 172) to change the settings.
Why is the data transfer speed slow?
❑The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,
move your computer away from obstacles or closer to any access point you may be using.
❑If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other
devices are communicating via the access point.
❑If your access point interferes with other access points, change the access point channel. See the manual that came with
your access point for more information.
❑Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
connect to a wireless LAN access point? (page 172) to change the settings.
175
n N
Troubleshooting >
Networking
How do I avoid data transfer interruptions?
❑When your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or
the computer is placed in close proximity to microwaves and cordless telephones.
❑Move your computer closer to the access point.
❑Make sure the access point connection is intact.
❑Change the access point channel. See the manual that came with your access point for more information.
❑Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
connect to a wireless LAN access point? (page 172) to change the settings.
What are channels?
❑Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point
channels may be preset to different channels from Sony devices.
❑If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your
access point.
Why does the network connection stop when I change the encryption key?
Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed.
You can either change the encryption key back to the original profile or re-enter the key on both computers so the key
matches.
176
n N
Troubleshooting >
Networking
How do I display the VAIO Smart Network window?
To display the VAIO Smart Network window on the desktop, follow these steps:
1Click Start, All Programs, and VAIO Control Center.
2Click Network Connections and VAIO Smart Network.
3Click Advanced in the right pane.
✍
For information on the VAIO Smart Network software, see the help file included with the software.
177
n N
Troubleshooting >
Bluetooth Technology
Bluetooth Technology
What should I do if other Bluetooth devices cannot find my computer?
❑Make sure both devices have the Bluetooth function enabled.
❑Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.
❑You cannot use the Bluetooth function when your computer is in a power saving mode. Bring the computer back to Normal
mode, then turn on the WIRELESS switch.
❑Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within
10 meters of each other.
What should I do if I cannot find the Bluetooth device I want to communicate with?
❑Check that the Bluetooth function of the device you want to communicate with is on. See the other device's manual for
more information.
❑If the device you want to communicate with is already communicating with another Bluetooth device, it may not be found
or it may not be able to communicate with your computer.
❑To allow other Bluetooth devices to communicate with your computer, follow these steps:
1Click Start, Control Panel, Hardware and Sound, Bluetooth Devices Bluetooth Settings, and .
2Click the Options tab and select the Allow Bluetooth devices to find this computer check box.
178
n N
Troubleshooting >
Bluetooth Technology
What should I do if other Bluetooth devices cannot connect to my computer?
❑Check the suggestions in What should I do if I cannot find the Bluetooth device I want to communicate with? (page
177).
❑Make sure the other devices are authenticated.
❑The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on
radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer
to each other.
Why is my Bluetooth connection slow?
❑The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave
quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each
other.
❑The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth
devices incorporate technology that minimizes interference from other devices using the same wavelength, however,
communication speed and connection range may be reduced. Interference from other devices may also stop
communications altogether.
❑Connection capability is affected by distance and obstructions. You may need to move your computer away from obstacles
or closer to the device to which it is connected.
❑Identify and remove obstacles between your computer and the device to which it is connected.
Why can't I use the services supported by the connected Bluetooth device?
Connection is only possible for services also supported by the computer with the Bluetooth function. For more details, search
for Bluetooth information using Windows Help and Support.
179
n N
Troubleshooting >
Bluetooth Technology
Can I use a device with Bluetooth technology on airplanes?
With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and
airplanes, may have restrictions on use of Bluetooth devices to avoid radio interference. Check with facility staff to see if use
of the Bluetooth function on the computer is permitted.
Why can't I use the Bluetooth function when I log onto my computer as a user with a
standard user account?
The Bluetooth function may not be available to a user with a standard user account on your computer. Log onto the computer
as a user with administrative rights.
Why can't I use the Bluetooth devices when I switch users?
If you switch users without logging off your system, the Bluetooth devices will not work. Be sure to log off before switching
users. To log off your system, click Start, the arrow next to the Lock button, and Log Off.
Why can't I exchange business card data with a mobile phone?
The business card exchange function is not supported.
180
n N
Troubleshooting >
Bluetooth Technology
What should I do if I do not hear sound from my headphones or audio/video controller?
Check the SCMS-T settings. If your headphones or audio/video controller does not support SCMS-T content protection, you
need to connect the device using the Advanced Audio Distribution Profile (A2DP). Follow these steps:
1Click Start, Control Panel, Hardware and Sound, and Bluetooth Devices.
2Right-click the icon for the device that you want to connect using the A2DP and select Control.
3Click to cancel the Connect to a device only if it supports SCMS-T content protection check box under SCMS-T
Settings.
182
n N
Troubleshooting >
Optical Discs
What should I do if I cannot play a disc properly on my computer?
❑Make sure the disc is inserted into the optical disc drive with the label facing upward.
❑Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑If a disc is dirty or damaged, your computer will stop responding. Follow these steps:
1Press the Ctrl+ +Alt Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
!
Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.
2Remove the disc from the optical disc drive.
3Check the disc for dirt or damage. If you need to clean the disc, see Handling Discs (page 148) for instructions.
❑If you are playing a disc and cannot hear sound, do any of the following:
❑The volume may have been turned off by the Fn F2+ keys. Press them once again.
❑The volume may have been minimized by the Fn F3+ keys. Keep pressing the Fn F4+ keys to turn up the volume loud
enough to hear sound.
❑Right-click the volume icon on the taskbar and click Open Volume Mixer to check the settings.
❑Check the volume setting in the audio mixer.
❑If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
❑Make sure the correct driver software is installed. Follow these steps:
1Click Start and Control Panel.
2Click System and Maintenance.
3Click System.
183
n N
Troubleshooting >
Optical Discs
4Click Device Manager in the left pane.
The Device Manager window appears with a listing of your computer's hardware devices.
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the driver
software.
5Double-click the optical disc drive device to open a list of the optical disc drives of your computer.
6Double-click the desired drive.
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.
7Click OK to close the window.
❑Make sure an adhesive label is not affixed to a disc. Adhesive labels can come off while the disc is in the optical disc drive
and damage the drive or cause it to malfunction.
❑If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the package to make
sure the region code is compatible with the optical disc drive.
❑If you notice condensation on your computer, do not use the computer for at least one hour. Condensation can cause the
computer to malfunction.
❑Make sure your computer is running on the AC power supply and try the disc again.
184
n N
Troubleshooting >
Optical Discs
What should I do if I cannot play Blu-ray Disc media or my computer becomes unstable
during Blu-ray Disc playback?
You may not be able to play some Blu-ray Disc contents on your computer, or the computer may become unstable during
Blu-ray Disc playback. To play such contents normally, download and install the latest updates for the WinDVD BD using the
VAIO Update.
For information on how to use the VAIO Update, see Updating Your Computer (page 27).
What should I do if I cannot write data to CD media?
❑Make sure you neither launch any software application nor allow any to launch automatically, not even a screen saver.
❑If you are using a CD-R/RW disc with an adhesive label affixed, replace it with one with no affixed adhesive label. Using
a disc with an affixed adhesive label could cause a write error or other damage.
What should I do if I cannot write data to DVD media?
❑Make sure you are using the correct DVD recordable media.
❑Check which DVD recordable format is compatible with your optical disc drive. Some brands of DVD recordable media do
not work.
Why can't I write data to Blu-ray Disc media?
❑Check if your optical disc drive supports the Blu-ray Disc writing function.
❑BD-R Disc media are not rewritable. You cannot add or erase data to or from the BD-R Disc media.
185
n N
Troubleshooting >
Display
Display
Why did my screen go blank?
❑Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the
Power Saving Modes (page 126) for more information.
❑Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑If your computer is using battery power, make sure the battery pack is installed properly and is charged. See Using the
Battery Pack (page 18) for more information.
❑If the display output is directed to the external display, press the Fn F7+ keys. See Combinations and Functions with
the Fn Key (page 29) for more information.
❑During the switching process, your computer screen becomes dark and may temporarily show some noise or flicker. This
is normal and does not indicate a malfunction.
186
n N
Troubleshooting >
Display
What should I do if I do not see proper images or videos?
❑Be sure to select Highest (32 bit) for the display colors before using video/image software or starting DVD playback.
Selecting any other option may prevent such software from displaying images successfully. To change the display colors,
follow these steps:
1Right-click on the desktop and select Personalize.
2Click Display Settings.
3Select Highest (32 bit) under Colors.
❑Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause
unsuccessful playback/display or unstable system operations.
Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is
enabled, it may be activated during DVD playback and prevent it from running successfully. Some screen savers have
been found to even change the display resolution and colors.
What should I do if no image is displayed on my TV screen or external display connected
to the HDMI output port?
❑The HDMI output port is disabled when your computer is in STAMINA mode. Change the performance mode to SPEED
mode before connecting an external device to the HDMI output port. See Selecting Performance Modes (page 111) for
mode selection.
❑Make sure you are using an HDCP-compliant display. The copyright protected contents are not displayed on a non-HDCP
compliant display. See Connecting a Computer Display (page 92) for more information.
187
n N
Troubleshooting >
Display
Why doesn't my screen display a video?
❑If the display output is directed to the external display and the external display is disconnected, you cannot display a video
on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video
playback. See Selecting Display Modes (page 100) for changing the display output. Alternatively, you can press the
Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 29) for more
information.
❑The video memory of your computer may be insufficient for displaying high resolution videos. In this case, lower the
resolution of the LCD screen.
To change the screen resolution, follow these steps:
1Right-click on the desktop and select Personalize.
2Click Display Settings.
3Move the slider under Resolution to the left to reduce or to the right to increase the screen resolution.
✍
You can check the total amount of the graphics and video memory available. Right-click on the desktop, select Personalize, and click Display Settings,
Advanced Settings, and the Adaptor tab. The displayed value may be different from the actual amount of memory on your computer.
What should I do if my screen is dark?
Press the Fn F6+ keys to brighten your computer screen.
188
n N
Troubleshooting >
Display
What should I do if the LCD brightness of my screen changes?
The LCD brightness setting, adjusted with the keys, is temporary and may be restored to the original setting when Fn F5 F6+ /
your computer returns to Normal mode from Sleep or Hibernate mode. To save your preference for the brightness, follow
these steps:
1Right-click the power status icon on the taskbar and select Power Options.
2Click Change plan settings under the current power plan.
3Click Change advanced power settings.
4Select the Advanced settings tab.
5Double-click Display.
6Adjust the LCD brightness setting in the item for brightness adjustment.
What should I do if the external display remains blank?
If you cannot change the display output with the Fn F7+ keys, you need to change the settings for the external display with
the VAIO Control Center. To change the settings, launch the VAIO Control Center, select the control item for the external
display, and then click to select the check box for changing the options to detect the external display. Then, use the Fn F7+
keys to change the display output.
189
n N
Troubleshooting >
Display
How do I run Windows Aero?
To run Windows Aero, follow these steps:
1Click Start and Control Panel.
2Click Customize colors under Appearance and Personalization.
3Click Open classic appearance properties for more color options.
4Select Windows Aero from the Color scheme options on the Appearance tab.
5Click OK.
For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support.
190
n N
Troubleshooting >
Printing
Printing
What should I do if I cannot print a document?
❑Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer.
❑Make sure your printer is compatible with the Windows operating system installed on your computer.
❑You may need to install the printer driver software before you use your printer. See the manual that came with your printer
for more information.
❑If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart
the computer.
❑If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may
enable printing. Follow these steps:
1Click Start and Control Panel.
2Click Printer under Hardware and Sound.
3Right-click the printer icon and select Properties.
4Click the Ports tab.
5Click to cancel the Enable bidirectional support check box.
6Click OK.
This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and
remote panel.
When your printer is connected to the optional docking station, check to see if the docking station is connected to an AC
power source.
191
n N
Troubleshooting >
Microphone
Microphone
What should I do if my microphone does not work?
If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone
jack on your computer.
How can I prevent microphone feedback?
Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker.
To prevent this problem:
❑Keep the microphone away from a sound output device.
❑Turn down the volume of the speakers and the microphone.
192
n N
Troubleshooting >
Speakers
Speakers
What should I do if I do not hear sound from the built-in speakers?
❑If you are using a program that has its own volume control, make sure the volume control is properly set. See the
program's help file for more information.
❑The volume may have been turned off by the Fn+F2 keys. Press them once again.
❑The volume may have been minimized by the Fn F3+ keys. Keep pressing the Fn F4+ keys to turn up the volume loud
enough to hear sound.
❑Check the Windows volume controls by clicking the volume icon on the taskbar.
What should I do if my external speakers do not work?
❑Check the suggestions in What should I do if I do not hear sound from the built-in speakers? (page 192).
❑Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.
❑Make sure your speakers are designed for computer use.
❑If your speakers have a muting button, set the button to off.
❑If your speakers require external power, make sure the speakers are connected to a power source. See the manual that
came with your speakers for more information.
193
n N
Troubleshooting >
Touch Pad
Touch Pad
What should I do if the touch pad does not work?
❑You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad (page 31).
❑Make sure that a mouse is not connected to your computer.
❑If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.
❑If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the
M m or key, and press the Enter key to restart your computer.
❑If your computer does not restart, press the Ctrl+ +Alt Delete keys, select the arrow next to the Shut down button with the
m , and keys and then Restart with the M or m key, and press the Enter key to restart your computer.
❑If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
194
n N
Troubleshooting >
Keyboard
Keyboard
What should I do if the keyboard configuration is wrong?
The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard
when you complete the Windows setup, the key configuration will be mismatched.
To change the keyboard configuration, follow these steps:
1Click Start and Control Panel.
2Click Clock, Language, and Region, and click Regional and Language Options.
3Change the settings as desired.
What should I do if I cannot enter certain characters with the keyboard?
If you cannot enter U I O P J K L M, , , , , , , , and so on, the Num Lk key may be activated. Check that the Num lock indicator
light is unlit. If the Num lock indicator is lit, press the Num Lk key to turn it off before entering these characters.
195
n N
Troubleshooting >
Floppy Disks
Floppy Disks
Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is
connected?
Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB
port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does
not appear, follow these steps:
1Close all programs that are accessing the floppy disk drive.
2Wait until the indicator light on the floppy disk drive turns off.
3Push the eject button to remove the disk, and disconnect the USB floppy disk drive from your computer.
4Reconnect the floppy disk drive by plugging the USB cable into the USB port.
5Restart the computer by clicking Start, the arrow next to the Lock button, and Restart.
What should I do if I cannot write data to a floppy disk?
❑Make sure the floppy disk is properly inserted in the drive.
❑If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can
either use a floppy disk that is not write-protected or disable the write-protect feature.
Product specificaties
| Merk: | Sony |
| Categorie: | Laptop |
| Model: | Vaio VGN-Z46MD |
Heb je hulp nodig?
Als je hulp nodig hebt met Sony Vaio VGN-Z46MD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laptop Sony
17 Juni 2023
16 Juni 2023
13 Juni 2023
13 Juni 2023
12 Juni 2023
10 Juni 2023
9 Juni 2023
9 Juni 2023
8 Juni 2023
5 Juni 2023
Handleiding Laptop
- Laptop HP
- Laptop Samsung
- Laptop Xiaomi
- Laptop Panasonic
- Laptop LG
- Laptop Huawei
- Laptop Asus
- Laptop Medion
- Laptop Toshiba
- Laptop Acer
- Laptop Airis
- Laptop Alienware
- Laptop Apple
- Laptop Dell
- Laptop Denver
- Laptop Emachines
- Laptop Ematic
- Laptop Evga
- Laptop Fellowes
- Laptop Fujitsu
- Laptop Gigabyte
- Laptop Goclever
- Laptop Haier
- Laptop Hannspree
- Laptop Hercules
- Laptop Honor
- Laptop Hyundai
- Laptop Ibm
- Laptop Kogan
- Laptop Lenovo
- Laptop Lexibook
- Laptop Micromax
- Laptop Microsoft
- Laptop Mpman
- Laptop MSI
- Laptop Nec
- Laptop Packard Bell
- Laptop Peaq
- Laptop Pyle
- Laptop Razer
- Laptop Ricatech
- Laptop Schneider
- Laptop Sylvania
- Laptop Targa
- Laptop Thomson
- Laptop Trekstor
- Laptop Viewsonic
- Laptop Vizio
- Laptop Zebra
- Laptop Jay-tech
- Laptop Odys
- Laptop Olidata
- Laptop Oregon Scientific
- Laptop Naxa
- Laptop Aplic
- Laptop ADATA
- Laptop Humanscale
- Laptop Hamilton Buhl
- Laptop Compaq
- Laptop SIIG
- Laptop Tripp Lite
- Laptop SPC
- Laptop Prixton
- Laptop Coby
- Laptop AORUS
- Laptop Hähnel
- Laptop XPG
- Laptop ECS
- Laptop Inovia
- Laptop Ergotron
- Laptop Atdec
- Laptop Getac
- Laptop Vulcan
- Laptop System76
- Laptop General Dynamics Itronix
- Laptop CTL
- Laptop Everex
- Laptop Dynabook
- Laptop TechBite
- Laptop Schenker
Nieuwste handleidingen voor Laptop
2 April 2025
28 Maart 2025
27 Maart 2025
26 Maart 2025
4 Maart 2025
10 Februari 2025
10 Februari 2025
10 Februari 2025
5 Februari 2025
5 Februari 2025