Sony LMD-1541W Handleiding

Sony Monitor LMD-1541W

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony LMD-1541W (43 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 117 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/43

LCD Monitor

Operating Instructions

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

LMD-2341W

LMD-2041W

LMD-1541W

4-256-703-18(1)

Owner’s Record

The model and serial numbers are located at the rear.

Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your

Sony dealer regarding this product.

Model No.____________________

Serial No.____________________

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete

outlet.

• Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

• Only use attachments/accessories specified by the

manufacturer.

• Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

• Unplug this apparatus during lightning storms or

when unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

WARNING

THIS APPARATUS MUST BE EARTHED.

WARNING

When installing the unit, incorporate a readily

accessible disconnect device in the fixed wiring, or

connect the power plug to an easily accessible socket-

outlet near the unit. If a fault should occur during

operation of the unit, operate the disconnect device to

switch the power supply off, or disconnect the power

plug.

Attention-when the product is installed in Rack:

1. Prevention against overloading of branch

circuit

When this product is installed in a rack and is supplied

power from an outlet on the rack, please make sure that

the rack does not overload the supply circuit.

2. Providing protective earth

When this product is installed in a rack and is supplied

power from an outlet on the rack, please confirm that the

outlet is provided with a suitable protective earth

connection.

Important Safety Instructions

This symbol is intended to alert the user to

the presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the

appliance.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the rack

is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous condition

due to uneven mechanical loading.

5. Install the equipment while taking the

operating temperature of the equipment into

consideration

For the operating temperature of the equipment, refer to

the specifications of the Operation Manual.

6. When performing the installation, keep the

following space away from walls in order to

obtain proper exhaust and radiation of heat.

Upper and lower : 4.4 cm (1 3/4 inches) or

Rear : 10.0 cm (4 inches) or more

CAUTION

This LCD monitor should only be used with a specified

monitor stand. For information on suitable stands, refer

to "Specifications." Installation of the LCD monitor on

any other stand may result in instability, possibly

leading to injury.

CAUTION

The apparatus shall not be exposed to dripping or

splashing. No objects filled with liquids, such as vases,

shall be placed on the apparatus.

CAUTION

The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even

if the unit itself has been turned off.

WARNING

Excessive sound pressure from earphones and

headphones can cause hearing loss.

In order to use this product safely, avoid prolonged

listening at excessive sound pressure levels.

For the customers in the U.S.A.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

WARNING:

Using this unit at a voltage other than 120 V may require

the use of a different line cord or attachment plug, or

both. To reduce the risk of fire or electric shock, refer

servicing to qualified service personnel.

For the customers in Canada

This Class A digital apparatus complies with Canadian

ICES-003.

For the customers in Europe

This product with the CE marking complies with the

EMC Directive issued by the Commission of the

European Community.

Compliance with this directive implies conformity to the

following European standards:

• EN55103-1 : Electromagnetic

Interference(Emission)

• EN55103-2 : Electromagnetic

Susceptibility(Immunity)

This product is intended for use in the following

Electromagnetic Environments:

E1 (residential), E2 (commercial and light industrial),

E3 (urban outdoors), E4 (controlled EMC environment,

ex. TV studio).

For the customers in Europe

This product has been manufactured by or on behalf of

Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. Inquiries related to product compliance

based on European Union legislation shall be addressed

to the authorized representative, Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters, please

refer to the addresses provided in the separate service or

guarantee documents.

Product specificaties

Merk:	Sony
Categorie:	Monitor
Model:	LMD-1541W
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
LED-indicatoren:	Stroom
Bluetooth:	Nee
Beeldscherm:	LCD
Beeldschermdiagonaal:	15 "
Resolutie:	1280 x 768 Pixels
Touchscreen:	Nee
Ethernet LAN:	Ja
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Meegeleverde kabels:	AC
Inclusief AC-adapter:	Ja
Aantal HDMI-poorten:	1
DVI-poort:	Nee
Bevestigingsmogelijkheid voor kabelslot:	Nee
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	0.5 W
Stroomverbruik (in standby):	- W
Vermogensverbruik (max):	50 W
Aantal luidsprekers:	1
Beeldscherm, aantal kleuren:	16.78 miljoen kleuren
HDCP:	Ja
3D:	Nee
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Display technologie:	LCD
Responstijd:	- ms
Ondersteunde grafische resoluties:	1280 x 768
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
Helderheid (typisch):	- cd/m²
Beeldverhouding:	15:9
Geïntegreerde TV Tuner:	Nee
Diepte ( zonder voet ):	70.4 mm
Hoogte (zonder voet ):	265.5 mm
Breedte ( zonder voet ):	373.2 mm
Gewicht (zonder voet):	5100 g
Plug and play:	Ja
Breedte apparaat (met standaard):	373.2 mm
Diepte apparaat (met standaard):	171.4 mm
Hoogte apparaat (met standaard):	283.5 mm
Gewicht (met standaard):	5300 g
Backlight type:	CCFL
Thin client geïnstalleerd:	Nee
Temperatuur bij opslag:	-20 - 60 °C
Gebruikershandleiding op CD-ROM:	Ja
Soort paneel:	TFT
Luchtvochtigheid bij opslag:	0 - 90 procent
BNC input ports:	3
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 85 procent