Snow Joe SJ627E-CVR Handleiding

Snow Joe Sneeuwblazer SJ627E-CVR

Lees hieronder de 📖 handleiding in het Nederlandse voor Snow Joe SJ627E-CVR (60 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/60

®, LLC

A Division of Snow Joe

®, LLC Model SJ627E-CVR Form No. SJ-SJ627E-CVR-880E-MR2

OPERATOR’S MANUAL

ELECTRIC SNOW THROWER

22-INCH | 15-AMP | LED LIGHTS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Any electrical appliance can be dangerous if used

incorrectly. Some of the safety precautions given in this

manual apply generally to many appliances. Other warnings

are specic to the use of this snow thrower. Keep this manual

for future reference.

General Safety WARNINGS!

You and any other operator of this snow thrower must read,

understand, and follow these instructions in their entirety, and

should reread them at the start of each snow season. Failure

to follow these instructions may result in ELECTRIC SHOCK,

FIRE, and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION,

and AWARENESS.

1. Keep work area clean and well lit. Cluttered, dark areas

invite accidents.

2. Do not operate the snow thrower in an explosive

atmosphere, such as in the presence of ammable

liquids, gases, or dust. Electrical appliances create sparks

that may ignite the dust or fumes.

3. Keep children, pets, and bystanders away from the

work area. Be aware that the normal noise of the

machine when turned on may make it dicult for you to

hear approaching people. Spectators should wear safety

glasses and be kept a safe distance away from the work

area. Do not let spectators touch the snow thrower or the

extension cord.

4. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

5. Avoid body contact with earthed or grounded surfaces

(i.e. upper and lower water pipes, radiators, ranges,

refrigerators, microwave ovens, and outer frames of

heating equipment). Take necessary precautions to avoid

electric shock. There is an increased risk of electric shock

if your body is earthed or grounded.

6. Do not abuse the cord. Keep the cord away from heat,

oil, sharp edges, or moving parts. Never carry the snow

thrower by its cord or yank the cord to disconnect it from

the electrical outlet. Damaged or entangled cords increase

the risk of electric shock.

7. Replace or properly repair damaged cords. If the cord

becomes damaged in any manner while plugged into the

wall receptacle, immediately pull the extension cord plug

from the receptacle.

8. Contact with water while operating the snow thrower

can result in electric shock and serious bodily injury.

Do not use the snow thrower in damp or wet locations or

expose to rain. Do not handle the plug or the appliance

with wet hands or while standing in water.

9. mWARNING – Use outdoor extension cords marked

SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A,

SJTW-A, or SJTOW-A. These cords are rated for outdoor

use and reduce the risk of electric shock.

10. Turnothepowerswitchanddisconnectthepower

cable before making any adjustments to the unit and

before inspecting, servicing, changing accessories, or

cleaning the snow thrower. Follow the same procedure

if any other dangerous conditions are present during

operation. Any adjustments to the unit should be

performed after revolving parts inside the snow thrower

stop completely. Such preventative safety measures

reduce the risk of starting the power tool accidentally.

11. Ifyoundthemainpowercableortheextensioncable

damaged, please pull out the plug from the socket and

disconnect the power immediately. Repair the cable or

replace it if necessary.

12. When replacing any parts, you must strictly observe

the instructions and procedures described in this

operator's manual. Special care should be paid to any

rubber parts, since these parts may increase the engine

load and decrease its mechanical power if damaged.

13. Do not move or transport the snow thrower when the

plug is connected to the power socket and the switch

is turned on.

14. If, during use, you notice that the unit runs unstably

or hear abnormal sounds from the motor, stop the

machine, disconnect the power immediately and

contact an authorized Snow Joe® + Sun Joe®

service center.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

the snow thrower. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

3. To reduce the risk of electric shock, this appliance has

a polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized UL-, CSA-, or

ETL-rated extension cord for outdoor, all-weather use.

The appliance plug will t into a polarized extension

cord only one way.

If the appliance plug does not t fully into the extension

cord, reverse the plug. If the plug still does not t, obtain

a correct polarized extension cord. A polarized extension

cord will require the use of a polarized wall outlet. The

extension cord plug will t into the polarized wall outlet

only one way. If the plug does not t fully into the wall

outlet, reverse the plug. If the plug still does not t,

contact a qualied electrician to install the proper wall

outlet. Do not modify the appliance plug, extension cord

receptacle, or extension cord plug in any way.

4. To prevent the appliance cord from disconnecting from the

extension cord during operation, use the on-board cord

restraint hook and/or make a knot with the two cords as

shown in Table 1.

5. Do not abuse the cord. Never pull the snow thrower by the

cord or yank the cord to disconnect it from the receptacle.

Keep the cord away from heat, oil, and sharp edges.

Extension Cord

Length

Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

14 12

m WARNING m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the electric snow thrower to

make contact with water while it is in operation. If the

appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA- or ETL-rated extension cord

for outdoor, all-weather use, such as the Snow Joe®+

Sun Joe® SJTW-A 14-gauge 50-foot extension cord

with lighted end (Model PJEXT50-B). Visit

snowjoe.com to purchase this extension cord online

or, to order by phone, call 1-866-SNOWJOE

(1-866-766-9563).

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

(B) Connect plug and receptacle

Cord set Appliance

cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Personal Safety

1. Stay alert – Watch what you are doing and use common

sense when operating the snow thrower. Do not use the

machine when tired, ill, or under the inuence of drugs,

alcohol, or medication. A moment of inattention may result

in serious personal injury.

2. Wear proper clothing – Wearing rubber boots oers

additional protection from electric shock. Do not wear

loose clothing or jewelry that may become caught in the

machine. Wear protective headgear to keep hair away

from revolving parts of the machine. Safety glasses oer

better protection than everyday eyeglasses.

Moving parts present risks – Keep your face, hair, clothing,

hands, and feet away from moving parts. All guards and

safety attachments must be installed properly before using

the unit. Shut o and disconnect the cord before touching

any parts other than the handles and the switch.

4. Surfaces – This snow thrower is intended for use on

paved surfaces. Do not use on gravel, stone, or other

unpaved surfaces unless the snow thrower is adjusted for

such surfaces according to the instructions given in this

operator’s manual.

5. Avoid accidental starting – Make sure the switch is in the

o position before plugging in the unit. Do not carry the

snow thrower with your nger on the switch.

6. Body position – Maintain proper footing and balance

at all times. Place heels rmly on the ground and tightly

grasp the handle bar. Watch for uneven surfaces and do

not overreach. In case you fall or collide with the snow

thrower, inspect the unit for any damage or cracks.

When stepping backwards, be careful to avoid obstacles

beneath your feet or behind you to avoid falling.

7. If the snow thrower strikes any object, immediately

stop the snow thrower, then inspect for damage –

Repair any damage before restarting and operating the

snow thrower.

Safety Instructions for Walk-Behind

Snow Throwers

• Readtheoperator’smanualcarefully–Learn your

snow thrower’s applications and limitations as well as the

specic potential hazards related to this machine. Do not

use this machine for any purpose other than the one for

which it was designed. Otherwise, it may cause mechanical

defaults, serious damage, or personal injury.

• Preliminaryunitinspection–Thoroughly inspect the unit

before use. Make sure all the parts are secure and installed

correctly. If you notice any abnormalities, do not use the

machine until it has been properly repaired.

Always perform a test run the rst time you use the snow

thrower or after replacing parts to ensure that the unit is

functioning properly.

•

Preliminary area inspection – Clear the area to be plowed

before each use. Remove all objects, such as rocks, broken

glass, nails, wire, or string, which can be thrown by or become

entangled in the snow thrower. Keep the area of operation

clear of all spectators, particularly children and pets.

• Excessiveforce–The snow thrower was designed to

respond at a certain rate for various snow conditions for

optimum safety and performance. Do not force it; keep

pressure constant.

• Malfunctioningswitch–Do not use the snow thrower

if the switch does not turn it on and o. Any electrical

appliance that cannot be controlled by the switch is not

safe to use and must be repaired.

• Hittinganobject–If the snow thrower accidentally strikes

an object, follow these steps:

i) Stop the snow thrower and unplug the unit

ii) Inspect for damage

iii) Repair or replace any damaged part before restarting

and operating the snow thrower.

• Discharge chute safety – Never direct the snow discharge

chute at the operator, at bystanders, at vehicles, or at

windows. The discharged snow stream and foreign objects

accidentally picked up by the snow thrower can cause

serious damage and personal injury. Do not use your hands

to unclog the discharge chute. Stop the motor before

removing debris.

• Hand-heldoperatingposition–Operation of the snow

thrower in the hand-held position is unsafe.

• Abnormaloperation–If you notice the snow thrower

running in an unstable state or hear abnormal sounds from

the engine, immediately stop the machine, disconnect the

power, and contact an authorized Snow Joe® + Sun Joe®

dealer or the Snow Joe® + Sun Joe® customer service

center at 1-866-SNOWJOE (1-866-766-9563).

• Noisecontrol–When using the snow thrower, you must

respect local laws and regulations regarding noise control

and environmental protection. To avoid noise disturbance,

you should carefully decide upon an appropriate operation

time and consider the surrounding conditions.

• Whenworkiscompleted–Disconnect the snow

thrower from the power source when not in use, when

changing accessories, and before performing any

maintenance function.

• Storesafely–Store the snow thrower indoors in a dry area

between uses. Keep it in a locked area, where children and

unauthorized users cannot gain access. Do not store the

machine while it is still connected to the power source as

this may result in damage and injury.

• Maintainforsafetyandlongevity–Check for

misalignment or binding of moving parts, breakage of

parts, and any other conditions that may aect the unit’s

operation. If damaged, repair or replace the damaged part

before use. Use only original replacement parts designed

specically for your model. When replacing any parts,

you must strictly observe the instructions and procedures

described in this manual. Special care should be paid to

any rubber parts, since these parts may increase the engine

load and decrease its mechanical power if damaged.

Always check that all bolts, nuts, and knobs are tight before

using the snow thrower!

Product specificaties

Merk:	Snow Joe
Categorie:	Sneeuwblazer
Model:	SJ627E-CVR

Heb je hulp nodig?

Als je hulp nodig hebt met Snow Joe SJ627E-CVR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer Snow Joe

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Snow Joe SJ618E Handleiding

3 Augustus 2023

Snow Joe 24V-SS10 Handleiding

16 Juni 2023

Snow Joe ION18SB-CT-RM Handleiding

16 Juni 2023

Snow Joe 323 Handleiding

12 Juni 2023

Snow Joe 24V-SS11-RM Handleiding

29 Mei 2023

Snow Joe SJ-SHLV20 Handleiding

26 Mei 2023

Snow Joe SJCVR-21 Handleiding

25 Mei 2023

Snow Joe SJ620-RM Handleiding

21 Mei 2023

Snow Joe 24V-SS11 Handleiding

14 Mei 2023

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Hurricane Snow Schuffel Handleiding

16 November 2024

Gude GESF 260 Handleiding

15 November 2024

NAC JZ7818 Handleiding

5 November 2024

Anova QN156T Handleiding

5 September 2024

Ryobi RY40809 Handleiding

22 Augustus 2024

Worx WG471E Handleiding

4 Mei 2024

Honda HSS760A Handleiding

21 Februari 2024

Honda HSS 760A T Handleiding

21 Februari 2024

Troy-Bilt Arctic Storm 34 Handleiding

31 Januari 2024

Troy-Bilt Storm 3090 Handleiding

31 Januari 2024