Snow Joe ION100V-24SB-CT Handleiding

Snow Joe Sneeuwblazer ION100V-24SB-CT

Lees hieronder de 📖 handleiding in het Nederlandse voor Snow Joe ION100V-24SB-CT (76 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/76

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model iON100V-24SB-CT Form No. SJ-iON100V-24SB-CT-880E-MR1

CORDLESS SNOW BLOWER

– TOOL ONLY

100V MAX*| 24-INCH | SELF-PROPELLED | 2-STAGE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol used in this m

manual to draw your attention to a WARNING given

along with the particular operating instruction. This

means that the operation requires special ATTENTION,

CAUTION, and AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Also use safety footwear, snug-tting Use safety glasses –

clothing, protective gloves, hearing and head protection.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Always disengage both triggers, and

disconnect the battery packs; wait for all movement to

stop before making any adjustments, inspecting, servicing,

changing accessories, cleaning the snow blower, or when

any other dangerous conditions present. Any such operation

should be performed after revolving parts inside the snow

blower stop completely. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, disconnect the

battery packs, and contact Snow Joe® + Sun Joe® customer

service center at 1-866-SNOWJOE (1-866-766-9563).

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the battery

packs before touching any parts other than the handles

and switch.

Electric Safety

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

1. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

2. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

3. When the battery packs are not in use, keep them away

from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can make

a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

4. Under abusive conditions, liquid may be ejected from the

batteries; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

5. Do not use a battery pack or appliance that is damaged

or modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

6. Do not expose battery packs or appliance to re or

excessive temperature. Exposure to re or temperature

above 265°F (130°C) may cause explosion.

7. Follow all charging instructions and do not charge the

battery packs or appliance outside of the temperature

range specied in the instructions. Charging improperly

or at temperatures outside of the specied range may

damage the battery and increase the risk of re.

8. Do not modify or attempt to repair the appliance or the

battery packs (as applicable) except as indicated in the

instructions for use and care.

For all Snow Blowers

• Do not use on graveled surfaces unless the snow blower is

adjusted for such a surface in accordance with the manual.

• Keep children away. All visitors should be kept a safe

distance from work area.

• Dress properly. Do not wear loose clothing or jewelry. They

can be caught in moving parts.

• Wear rubber boots when operating the snow blower.

• Operation of the snow blower in the hand-held position is

unsafe, except in accordance with the special instructions

for such use provided in the operator's manual.

• Prevent unintentional starting – Ensure the switch is in the

o-position before connecting to battery packs, picking up

or carrying the appliance. Carrying the appliance with your

nger on the switch or energizing appliance that have the

switch on invites accidents.

• Disconnect the battery packs from the appliance before

making any adjustments, changing accessories, or storing

appliance. Such preventive safety measures reduce the risk

of starting the appliance accidentally.

• Keep hands away from moving parts.

• Keep guards in place and in working order.

• Do not force the snow blower. Use the snow blower at

the rate for which it was designed to ensure optimal

performance and safe operation.

• Do not overreach. Keep proper footing and balance at

all times.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower and remove the battery packs.

ii) Inspect for damage.

iii) Repair any damage before restarting and operating

the snow blower.

For Walk-behind Snow

Blowers

This snow blower is capable of amputating hands and feet

and throwing objects. Failure to observe the following safety

instructions could result in serious injury.

Training

1. Read, understand and follow all instructions on the

machine and in the manual before operating this unit. Be

thoroughly familiar with the controls and the proper use of

the equipment. Know how to stop the unit and disengage

the controls quickly.

2. Never allow children to operate the equipment. Never

allow adults to operate the equipment without proper

instruction.

3. Keep the area of operation clear of all persons, particularly

small children.

4. Exercise caution to avoid slipping or falling. Especially

when operating the snow blower in reverse.

Preparation

1. Thoroughly inspect the area where the equipment is to be

used and remove all doormats, sleds, boards, wires, and

other foreign objects.

2. Do not operate the equipment without wearing adequate

winter garments. Avoid loose tting clothing that can get

caught in moving parts. Wear footwear that will improve

footing on slippery surfaces.

3. Never attempt to make any adjustment while the motor

is running, except when specically recommended by

manufacturer.

4. Always wear safety glasses or eye shields during

operation or while performing an adjustment or repair

to protect eyes from foreign objects that may be thrown

from the machine.

Operation

1. Do not put hands or feet near or under rotating parts.

Keep clear of the discharge opening at all times.

2. Exercise extreme caution when operating on or crossing

gravel drives, walks, or roads. Stay alert for hidden

hazards or trac.

3. After striking a foreign object, stop the motor, remove

the batteries, thoroughly inspect the snow blower for any

damage, and repair the damage before restarting and

operating the snow blower.

4. If the unit start to vibrate abnormally, stop the motor and

check immediately for the cause. Vibration is generally a

warning of trouble.

5. Stop the motor whenever you leave the operating position,

before unclogging the auger/impeller housing or discharge

chute, and when making any repairs, adjustments or

inspection.

6. When cleaning, repairing, or inspecting the snow blower,

stop the motor and make sure the auger/impeller and all

moving parts have stopped.

7. Do not run the motor indoors, except when starting

the motor and for transporting the snow blower in or

out of the building. Open the outside doors. Exhaust

fumes are dangerous.

8. Exercise extreme caution when operating on slopes.

9. Never operate the snow blower without proper guards and

other safety protective devices in place and working.

10. Never direct the discharge toward people or areas

where property damage can occur. Keep children and

others away.

11. Do not overload the machine at high transport speeds

on slippery surfaces. Look behind and use care when

operating in reverse.

12. Do not overload the machine capacity by attempting to

clear snow at too fast a rate.

13. Disengage the power to the auger/impeller when snow

blower is transported or not in use.

14. Use only attachment and accessories approved by the

manufacturer of the snow blower.

15. Never operate the snow blower without good visibility or

light. Always be sure of your footing, and keep a rm hold

on the handle. Walk; Never run.

16. Never touch a hot motor.

Clearing a Clogged Discharge Chute

mWARNING! Rotating blades can cause serious injury.

Never attempt to unclog or clean unit while auger is running.

Hand contact with the rotating impeller/auger inside the

discharge chute is the most common cause of injury

associated with snow blowers. Never use your hand to clean

out the discharge chute.

To clean the chute:

1. SHUT THE MOTOR OFF AND REMOVE THE

BATTERY PACKS.

2. Wait 10 seconds to be sure the auger blades have

stopped completely.

3. Use the equipped chute clean-out tool to clear the

blockage.

Maintenance and Storage

1. Check shear bolts and other bolts at frequent intervals

for proper tightness to be sure the equipment is in safe

working condition.

2. Always refer to the operator's manual for important details

if the snow blower is to be stored for an extended period.

3. Maintain or replace safety and instruction labels,

as necessary.

4. Run the machine a few minutes after plowing snow to

prevent freeze-up of the auger/impeller.

Battery + Charger

Safety Instructions

NOTE: This unit is tool only. The batteries and the charger are

not included. They must be purchased separately.

Model iON100V-24SB-CT is compatible with the iONPRO100V

batteries (iON100V-5AMP or greater) and charger (iON100V-

RCH). See page 22 for more information.

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery packs can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement

batteries; other batteries may damage the cordless snow

blower and cause it to malfunction, which can lead to serious

personal injury.

mCAUTION! To reduce the risk of injury, charge

the iON100V-5AMP lithium-ion battery packs only in the

designated lithium-ion charger, the iON100V-RCH. Other types

of chargers present risk of re, personal injury and damage. Do

not wire a battery pack to a power supply plug or car cigarette

lighter. Such misuse will permanently disable or damage the

battery pack.

• Avoid dangerous environments – Do not charge the

battery packs in rain, snow or in damp or wet locations.

Do not use the battery packs or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is 32°F

(0°C) to 104°F (40°C). Do not charge the battery outside in

freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull

the plug, not the cord, from the receptacle to reduce the

risk of damage to the electrical plug and cord. Never carry

the charger by its cord or yank it by the cord to disconnect

it from the receptacle. Keep the cord away from heat, oil

Product specificaties

Merk:	Snow Joe
Categorie:	Sneeuwblazer
Model:	ION100V-24SB-CT

Heb je hulp nodig?

Als je hulp nodig hebt met Snow Joe ION100V-24SB-CT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer Snow Joe

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Snow Joe SJ618E Handleiding

3 Augustus 2023

Snow Joe 24V-SS10 Handleiding

16 Juni 2023

Snow Joe ION18SB-CT-RM Handleiding

16 Juni 2023

Snow Joe 323 Handleiding

12 Juni 2023

Snow Joe 24V-SS11-RM Handleiding

29 Mei 2023

Snow Joe SJ-SHLV20 Handleiding

26 Mei 2023

Snow Joe SJCVR-21 Handleiding

25 Mei 2023

Snow Joe SJ620-RM Handleiding

21 Mei 2023

Snow Joe 24V-SS11 Handleiding

14 Mei 2023

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Texas SBX2020 Handleiding

9 December 2024

Einhell Royal ESF 1839 Handleiding

4 December 2024

Einhell Royal MSF 570 Handleiding

4 December 2024

Hurricane Snow Schuffel Handleiding

16 November 2024

Gude GESF 260 Handleiding

15 November 2024

NAC JZ7818 Handleiding

5 November 2024

Anova QN156T Handleiding

5 September 2024

Ryobi RY40809 Handleiding

22 Augustus 2024

Worx WG471E Handleiding

4 Mei 2024

Honda HSS760A Handleiding

21 Februari 2024