Snow Joe 24V-X2-SB18-CT Handleiding

Snow Joe Sneeuwblazer 24V-X2-SB18-CT

Lees hieronder de 📖 handleiding in het Nederlandse voor Snow Joe 24V-X2-SB18-CT (56 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

®, LLC

A Division of Snow Joe®, LLC Model 24V-X2-SB18-CT Form No. SJ-24V-X2-SB18-CT-880E-MR1

OPERATOR’S MANUAL

CORDLESS SNOW BLOWER – TOOL ONLY

18-INCH | 48-VOLT MAX* | LED LIGHT

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol used in this m

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Keep bystanders away – All bystanders and pets should

be kept a safe distance away from the work area.

• Dress properly – lry. Do not wear loose clothing or jewe

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Also use safety footwear, snug-tting Use safety glasses –

clothing, protective gloves, hearing and head protection.

• Do not force the snow blower – Use the snow blower

at the rate for which it was designed to ensure optimal

performance and safe operation.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Do not overreach – Keep proper footing and balance at

all times.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Always disengage the switch lever and

remove the battery pack before making any adjustments,

inspecting, servicing, changing accessories, cleaning the snow

blower, or when any other dangerous conditions are present.

Any such operation should be performed after revolving parts

inside the snow blower stop completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts,

since these parts may increase the motor load and decrease

its mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the motor

when it is in use, immediately stop the machine, disconnect

the battery, and contact your service center.

• Surfaces – This snow blower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow blower is adjusted for

such surfaces according to the instructions given in the

operator’s manual.

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts.

All guards and safety attachments must be installed

properly before using the unit. Shut o and disconnect the

battery before touching any parts other than the handles

and switch.

• Avoid unintentional starting – Make sure the safety switch

and the switch lever are in the o position before inserting

the battery in the unit. Do not carry the snow blower with

the safety switch and the switch lever engaged.

• Do not overreach – Maintain proper footing and balance

at all times. Place heels rmly on the ground and tightly

grasp the handle bar. Watch for uneven surfaces and do not

overreach. In case you fall or collide with the snow blower,

inspect the unit for any damages or cracks. When stepping

backwards, be careful to avoid obstacles beneath your feet

or behind you to avoid falling.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower. Remove the battery.

ii) Inspect for damage.

iii) Repair any damage before restarting and operating

the snow blower.

Battery & Charger

Safety Instructions

NOTE: This unit is the tool only. The battery and the charger

are not included. They must be purchased separately.

Model 24V-X2-SB18-CT is compatible with the iON+ 24V

System batteries and chargers. See page 16 for more

information.

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury

mWARNING! Use only approved replacement batteries;

other batteries may damage the snow blower and cause it to

malfunction.

mCAUTION! To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery packs only in their designated

iON+ 24V lithium-ion charger. Other types of chargers present

risk of re, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

The safe temperature range for the battery is NOTE:

-4°F – 113ºF (-20°C – 45°C). Do not charge the battery

outside in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger,

pull the plug, not the cord, from the receptacle to reduce

the risk of damage to the electrical plug and cord.

Never carry the charger by its cord or yank it by the cord

to disconnect it from the receptacle. Keep the cord away

from heat, oil and sharp edges. Make sure the cord will not

be stepped on, tripped over or subjected to damage or

stress when the charger is in use. Do not use the charger

with a damaged cord or plug. Replace a damaged charger

immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Check the rated input for the charger before using –

The charger must be plugged into an appropriate

receptacle.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to remove

battery packs from unplugged chargers.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery packs – Battery packs

may explode, causing personal injury or damage.

Toxic fumes and materials are created when battery packs

are burned.

• Do not crush, drop or damage battery packs – Do not

use the battery pack or charger if they have sustained a

sharp blow, been dropped, run over or have been damaged

in any way (i.e. pierced with a nail, hit with a hammer,

stepped on, etc.).

• Disconnect the battery pack from the appliance before

making any adjustments, changing accessories,

or storing appliance – Such preventive safety measures

reduce the risk of starting the appliance accidentally.

• Avoid unintentional starting – Make sure the safety switch

and the switch lever are in the o position before inserting

the battery in the unit. Do not carry the snow blower with

the safety switch and the ON/OFF trigger engaged.

• When battery pack is not in use, keep it away from other

metal objects – like paper clips, coins, keys, nails, screws

or other small metal objects that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a re.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact – If contact accidentally

occurs, ush with water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the battery may

cause irritation or burns.

• Do not use a battery pack or appliance that is damaged

ormodied–Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

• Donotexposeabatterypackorappliancetoreor

excessive temperature – Exposure to re or temperature

above 130°C (265ºF) may cause explosion.

• Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature

rangespeciedintheinstructions–Charging improperly

or at temperatures outside of the specied range may

damage the battery and increase the risk of re.

• Haveservicingperformedbyaqualiedrepairperson

using only identical replacement parts – This will ensure

that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the

battery pack – (as applicable) except as indicated in the

instructions for use and care.

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

please contact an authorized Snow Joe® + Sun Joe® dealer

or call the Snow Joe® + Sun Joe® customer service center

at 1-866-SNOWJOE (1-866-766-9563).

• Battery chemicals cause serious burns – Never let a

damaged battery pack contact the skin, eyes or mouth. If a

damaged battery pack leaks battery chemicals, use rubber

or neoprene gloves to safely dispose of it. If skin is exposed

to battery uids, wash the aected area with soap and

water and rinse with vinegar. If eyes are exposed to battery

chemicals, immediately ush with water for

20 minutes and seek medical attention. Remove and

dispose of contaminated clothing.

• Store your battery pack and charger in a cool, dry

place – Do not store the battery pack or charger where

temperatures may exceed 104ºF (40ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

Information about the battery

1. For optimum battery performance, avoid low discharge

cycles by charging the battery pack frequently.

2. Store the battery pack in a cool place, ideally at 59°F

(15°C) and charged fully.

3. Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when its capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your snow blower,

and therefore pose a safety risk.

4. Do not throw battery packs into an open re as this poses

a risk of explosion.

5. Do not ignite the battery pack or expose it to re.

6. Do not exhaustively discharge batteries. Exhaustive

discharge will damage the battery cells. The most

common cause of exhaustive discharge is lengthy storage

or non-use of partially discharged batteries. Stop working

as soon as the performance of the battery falls noticeably

or the electronic protection system triggers. Place the

battery pack in storage only after it has been fully charged.

7. Protect the battery and the tool from overloads. Overloads

will quickly result in overheating and cell damage inside

the battery housing even if this overheating is not apparent

externally.

8. Avoid damage and shocks. Immediately replace batteries

that have been dropped from a height of more than one

meter or those that have been exposed to violent shocks,

even if the housing of the battery pack appears to be

undamaged. The battery cells inside the battery may have

suered serious damage. In such instances, please read

the waste disposal information for proper battery disposal.

9. If the battery pack suers overloading and overheating,

the integrated protective cuto will switch o the

equipment for safety reasons. If this situation happens,

stop the tool and let the battery cool down for a few

minutes before restarting.

IMPORTANT! Do not press the ON/OFF trigger any more

if the protective cut-o has been activated. This may

damage the battery pack.

10. Use only original battery packs. The use of other batteries

poses a re risk and may result in injuries or an explosion.

Information about the charger and the

charging process

1. Please check the data marked on the rating plate of the

battery charger. Be sure to connect the battery charger

to a power supply with the voltage marked on the rating

plate. Never connect it to a dierent mains voltage.

2. Protect the battery charger and its cord from damage.

Keep the charger and its cord away from heat, oil and

sharp edges. Have damaged cords repaired without delay

by a qualied technician at an authorized Snow Joe® +

Sun Joe® dealer or call the Snow Joe® + Sun Joe®

customer service center at 1-866-SNOWJOE

(1-866-766-9563).

3. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

4. Keep the battery charger, battery pack(s) and the cordless

tool out of the reach of children.

5. Do not use the supplied battery charger to charge other

cordless tools.

6. During periods of heavy use, the battery pack will become

warm. Allow the battery pack to cool to room temperature

before inserting it into the charger to recharge.

Product specificaties

Merk:	Snow Joe
Categorie:	Sneeuwblazer
Model:	24V-X2-SB18-CT

Heb je hulp nodig?

Als je hulp nodig hebt met Snow Joe 24V-X2-SB18-CT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer Snow Joe

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Snow Joe SJ618E Handleiding

3 Augustus 2023

Snow Joe 24V-SS10 Handleiding

16 Juni 2023

Snow Joe ION18SB-CT-RM Handleiding

16 Juni 2023

Snow Joe 323 Handleiding

12 Juni 2023

Snow Joe 24V-SS11-RM Handleiding

29 Mei 2023

Snow Joe SJ-SHLV20 Handleiding

26 Mei 2023

Snow Joe SJCVR-21 Handleiding

25 Mei 2023

Snow Joe SJ620-RM Handleiding

21 Mei 2023

Snow Joe 24V-SS11 Handleiding

14 Mei 2023

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Texas SBX2020 Handleiding

9 December 2024

Einhell Royal ESF 1839 Handleiding

4 December 2024

Einhell Royal MSF 570 Handleiding

4 December 2024

Hurricane Snow Schuffel Handleiding

16 November 2024

Gude GESF 260 Handleiding

15 November 2024

NAC JZ7818 Handleiding

5 November 2024

Anova QN156T Handleiding

5 September 2024

Ryobi RY40809 Handleiding

22 Augustus 2024

Worx WG471E Handleiding

4 Mei 2024

Honda HSS760A Handleiding

21 Februari 2024