Smeg SI2731D Handleiding

Smeg Fornuis SI2731D

Lees hieronder de 📖 handleiding in het Nederlandse voor Smeg SI2731D (13 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
PRECAUTIONS - 2191477B180/A
e
could reach the hob.
• Do not touch or clean the hob
surface during operation or
when the residual heat
indicator lights are still on.
• After use, switch off the plates.
Never rely solely on the
cookware detector.
• Supervise children carefully as
they cannot readily see the
residual heat indication. After
use the cooking zones remain
hot for a certain period of time
even if they have been turned
off. Keep children away from
the cooking zones.
• The cooking process must
always kept under control. A
short cooking process must be
continuously monitored.
• WARNING: Cooking foods
containing fat and/or oil
without monitoring them can be
dangerous and can cause a
fire.
• Fats and oils can catch fire if
they overheat. Do not leave the
appliance unattended while
preparing foods containing oils
or fats. If fats or oils catch fire,
never put water on them. Place
the lid on the pan and turn off
the relevant cooking zone.
• Do not use the Booster and/or
the Double Booster functions (if
present) to heat fats or oils. Fire
hazard.
• Do not place metal objects,
such as dishes or cutlery, on the
surface of the hob during
cooking as they may overheat.
• Do not cook foods in closed
tins or containers or plastic
containers.
• Do not use magnetic tins.
• Do not use trivets or other items
between the bottom of the pan
and the glass ceramic surface.
Danger of burns.
• Do not insert pointed metal
objects (cutlery or utensils) into
the slots in the appliance.
• Do not use or store flammable
materials near the appliance or
directly underneath the hob.
• Switch off the appliance
immediately after use.
• Do not pull the cable to unplug
the appliance (if present).
• DO NOT USE AEROSOLS IN
THE VICINITY OF THIS
APPLIANCE WHILST IT IS IN
USE.
• DO NOT MODIFY THIS
APPLIANCE.
• Always wear personal
protective equipment (PPE)
before carrying out any work
on the appliance (installation,
maintenance, positioning or
moving).
• Do not clean the appliance if it
is still hot or in operation.
• After use the cooking zones
remain hot for a certain period
of time after they have been
turned off. Do not touch the hob
surfaces.
22 - PRECAUTIONS 91477B180/A
• Before performing any work on
the appliance, switch off the
power supply.
• Do not try to repair the
appliance yourself or without
the assistance of a qualified
technician.
• If the power cable becomes
damaged, contact technical
support immediately to arrange
for it to be replaced in order to
avoid possible hazards.
• If cracks or fissures form, or if
the glass ceramic cooking
surface breaks, turn off th e
appliance immediately.
Disconnect the power supply
and call T echnical Su
• People who have pacemakers
or other similar devices fitted
must make sure that the
operation of these devices is
not affected by the induction
field, the frequency range of
which is between 20 and 50
kHz.
• In conformity with the provisions
regarding electromagnetic
compatibility, the
electromagnetic induction
cooking hob comes under
group 2 and class B (EN
55011).
Risk of damaging the appliance
• Do not use abrasive or
corrosive detergents (e.g.
scouring powders, stain
removers and metallic
sponges) on glass parts.
• Use wooden or plastic u
• Do not sit on the applian
• Do not use the glass cer
cooking surface as a support
surface.
• Do not use the applianc
support surface.
• Do not obstruct ventilat
openings and heat dispersal
slots.
• Do not use the hob if th
pyrolytic cycle is taking place
inside any oven installed
below.
• Do not use steam jets to
the appliance.
• Never leave the applian
unattended during cooking
operations where fats or oils
could be released, as these
could then heat up and catch
fire. Be very careful.
• Fire hazard: Never leav
objects on the cooking
surfaces.
• DO NOT FOR ANY RE
USE THE APPLIANCE AS A
SPACE HEA TER.
• Cooking vessels or grid
plates should be placed inside
the perimeter of the hob.
• All pans must have smo
bottoms.
• If any liquid does boil o
spill, remove the excess from
the hob.
• Tsubstances such as lemon juice
PRECAUTIONS - 23 91477B180/A
or vinegar on the hob.
• Do not spill sugar or sweet
mixtures on the hob during
cooking.
• Do not place materials or
substances that could melt
catch fire (paper, plastic or
aluminium foil) on the
appliance while it is in use
• Place the cookware directly on
the glass ceramic surface.
• Do not put empty pans or frying
pans on switched on cooki
zones.
• Do not use rough or abrasive
materials or sharp metal
scrapers.
• The glass ceramic surface is
highly resistant to impact.
However, prevent hard, so
objects from falling on the
cooking surface as they ma
cause it to brea k
• Do not use cleaning products
containing chlorine, ammo
or bleach on parts made of
steel or that have metallic
surface finishes (e.g. anodi
nickel- or chromium-platin
• This appliance is not intended
to be operated by means of
external timer or separate
remote control system.
Installation
• THIS APPLIANCE MUS
BE INS T
CARAVANS.
• This appliance must not be
installed on a dishwasher.
• Position the appliance into the
cabinet cut-out with the help of
a second person.
• Check that the carcase has the
required openings.
• Check that the carcase material
is heat resistant.
• Installation and servicing should
be carried out by qualified
personnel in accordance with
current standards.
• Have the electrical connection
performed by authorised
technical personnel.
• The appliance must be
connected to earth in
compliance with electrical
system safety standard s.
• Use cables that can withstand
temperatures of at least 90°C.
• Run the power cable in the rear
part of the unit. Make sure that
it does not come into contact
with the lower part of t he hob
or a built-in oven below it.
• Be careful when connecting
additional electrical
appliances. Connection cables
must not come into contact with
hot cooking zones.
• The tightening torque of the
screws of the terminal supply
wires must be 1.2 - 1.5 Nm.
• Do not attach the appliance
too tightly to the unit as this could cause damage during use or partially obstruct the h eat dispersal slots.• The power cable must only be


Product specificaties

Merk: Smeg
Categorie: Fornuis
Model: SI2731D

Heb je hulp nodig?

Als je hulp nodig hebt met Smeg SI2731D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Smeg

Smeg

Smeg C9GMX9 Handleiding

19 December 2024
Smeg

Smeg SIM1844DS Handleiding

14 December 2024
Smeg

Smeg SIM1844D Handleiding

14 December 2024
Smeg

Smeg C6GMXNLK2 Handleiding

7 December 2024
Smeg

Smeg C6GMXD2 Handleiding

7 December 2024
Smeg

Smeg C6IMMBT2 Handleiding

7 December 2024
Smeg

Smeg SAI4744D Handleiding

25 November 2024
Smeg

Smeg SAI4634D Handleiding

25 November 2024
Smeg

Smeg SAIG6954R Handleiding

25 November 2024
Smeg

Smeg SIM1644DS Handleiding

21 November 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis