Smeg CDL73 Handleiding

Smeg Wasdroger CDL73

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Smeg CDL73 (29 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
1 2 3 4 5 6
Empty the condensation container. (Empty water)
Emptying condensation
Empty container each drying operation!after
1. Pull out condensation container keeping it horizontal.
2. Pour out condensation.
3. Always push container in fully until it clicks into place.
Cleaning the fluff filter
Clean the fluff filter each drying operation.after
1. Open the door, remove fluff from door/door area.
2. Pull out and fold open the fluff filter.
3. Remove the fluff (by wiping the filter with your hand).
If the fluff filter is very dirty or blocked, rinse with warm water and dry
thoroughly.
4. Close and reinsert the fluff filter.
Switching off the dryer
Turn the programme selector to .Off
Do not leave laundry in the dryer.
Removing the laundry
The automatic anti-crease function causes the drum to move at specific intervals, the washing remains
(Less Ironing) function is also selected-
depending on model).
... and adapt to individual requirements
Never start the dryer if it is damaged!
Inform your after-sales service. Inspecting the
dryer
Sorting and loading laundry
Remove all items from pockets.
Check for cigarette lighters.
The drum must be empty prior to loading.
See programme overview on page 7.
See also separate instructions for β€œWoollens basket”
(depending on model)
Your new dryer
Congratulations - You have chosen a modern, high-quality Smeg
domestic appliance.
The condensation dryer is distinguished by its economical energy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Disposal in an environmentally-responsible manner
Dispose of packaging in an environmentally-responsible manner.
This appliance is labelled in accordance with the European
guideline
equipment - WEEE.
The guideline provides an EU-wide framework for the return and
recycling of old appliances.
For further information about our products, accessories,
spare parts and services, please visit: www.smeg.com
Intended use Preparing for installation, see Page 8
Selecting and adjusting the programme
Drying
Condensation container
Control panel
washed with water.
Do not leave children
unsupervised near the dryer.
Keep pets away from the dryer.
The dryer can be operated by children 8 years old
and older, by persons with reduced physical,
sensory or mental abilities and by persons with
insufficient experience or knowledge if they are
supervised or have been instructed in its use by
a responsible adult.
Select the drying programme ...
Press the START/STOP button
1
2
3
Make sure your hands are dry.
Hold the plug only. Connecting the
mains plug
Drying
Drum
All buttons are sensitive and only
need to be touched lightly.
Only operate the dryer with
the fluff filter inserted! Air inlet
Fluff filter
Drum interior light
(depending on model)
Maintenance
flap Programme end once lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The programme selected must then be resumed and completed.
Never switch the dryer off before the drying process has ended.
Drum and door may be hot!
1. Open door, the drying process is interrupted.
2. Load or remove laundry and close door.
3. If required, select a new programme and additional functions.
4. Press the /STOP button. START
Contents Page
Additional
functions
Programme selector Time
remaining
Display panel
a longer drying time; e.g. for polyacrylics, polyamide, elastane
or acetate.
Reduces creasing and extends the anti-creasing phase once
the program has ended.
Information on laundry ...
Labelling of fabrics
Follow the manufacturer's care information.
(Low Heat).
Do not tumble-dry the following fabrics for example:
– Impermeable fabrics (e.g. rubber-coated fabrics).
– Laundry contaminated with oil.
Drying tips
– To ensure a consistent result, sort the laundry by fabric type and drying programme.
– Always dry very small items (e.g. baby socks) together with large items of laundry
(e.g. hand towel).
– Close zips, hooks and eyelets, and button up covers.
Tie fabric belts, apron strings, etc. together
Allow laundry to finish drying in the air.
Programme (depending on model).
the remaining moisture will then be distributed evenly.
do not use the programme.Cupboard Dry Plus
adversely affects the drying operation.
– Use the correct dosage of fabric softener as per the manufacturer's instructions when
washing the laundry to be dried.
Environmental protection / Energy-saving tips
speed the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
– Make sure the room is well ventilated during drying.
– Do not obstruct or seal up the air inlet.
Fine adjustment of the drying result
Adjustment of the levels of dryness
1 x to
the right and turn 5 x to the right the required level is reached
Turn to
Off
Turn to
Off
Fine adjustment of the drying result
Care and cleaning
Dryer housing, control panel, air cooler, moisture sensors
– Wipe with a soft, damp cloth.
– Do not use harsh cleaning agents and solvents.
– Remove detergent and cleaning agent residue immediately.
– During drying, water may collect between the door and seal.
This does not affect your dryer's functions in any way.
Clean the protective filter 5 - 6 times a year
Air cooler / Protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
– Allow the dryer to cool.
– Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
5. Clean the air cooler thoroughly,protective filter/
Allow to drip dry.
6. Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
Do not use steel wool or abrasive materials.
L:00, L:01, L:02, L:03 are shown in sequence
Short signal when changing from L:03 to L:00, otherwise long
signal.
Only when switched off!
End of programme in 1*-24 hours (Press button several times if required)
Can always be selected to the next full hour.)
0, 1, 2, 3 The drying result (e.g. Cupboard Dry) can be adjusted over three levels (1 - max. 3) for the ,Cottons
After one of these programmes has been finely adjusted, the setting is retained for the others.
Fine
adjustment
of the drying
result
7
Programme overview also see Page 5
Sort the laundry according to type of textile and fabric. Fabrics must be suitable for tumble drying.
After drying... iron laundry lightly iron laundry do not iron laundry mangle laundry
PROGRAMMES TEXTILE TYPE AND INFORMATION
**CottonsΓΌmax. 7 kg Hard-wearing fabrics, boil-resistant fabrics made of cotton or linen.
**Easy-Care max. 3.5 kg Non-iron laundry made of synthetic fibres and blended fabric, easy-care cotton.
** max. 3 kg Mixed items of laundry madeof cotton and synthetics (Mix).
*
Woollen Finish max. 3 kg Woollen fabrics suitable for washing machines. Fabrics become fluffier but not dry.
Remove fabrics once the programme has ended and allow to dry.
Outdoor max. 1.5 kg Fabrics with membrane coating, water-repellent fabrics, functional clothing, fleece fabrics (dry jackets/trousers with
removable internal lining separately).
Rapid 40 min. max. 2 kg
Laundry made of synthetic fibres, cotton or blended fabrics (for example) that needs to be dried quickly. The values may
differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the
fabric and loading capacity.
Programme time
Warm 20 min max. 3 kg Pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or separate small items of laundry.
Also for subsequent drying.
*for and programmes onlyCottons Easy-Care
Degree of dryness can be finely adjusted; multi-layered textiles require a longer drying time than single-layered items of clothing.
Recommendation: Dry separately.
9304 / 9000885924
*885924* CDL73
8
Installation
– Delivery specification: dryer, instructions for installation and use, woollens basket
(depending on model).
– Check dryer for transport damage.
– The dryer is very heavy. Do not attempt to lift it on your own.
– Be careful to avoid sharp edges.
– Do not lift the dryer by any of the protruding parts (e.g. the door) as they may break off.
– Do not set up in a room that is susceptible to frost.
Freezing water may cause damage.
– If in doubt, have the appliance connected by an expert.
Setting up the dryer
– The appliance plug must always be accessible.
– Ensure that the appliance is installed on a clean, level
and solid surface.
– Keep the cooling grille at the front of the dryer
unobstructed.
– Keep the area around the dryer clean.
– Make the dryer level using the threaded feet
and a spirit level.
Do not remove the threaded feet under any
circumstances.
Mains connection see safety instructions Page 11.
– Connect to an AC earthed socket. If in doubt have the socket checked by an expert.
– The mains voltage and the voltage shown on the rating plate ( Page 9) must correspond.
– The connected load and necessary fuse protection are specified on the rating plate.
Converting the installed load Note the fuse protection of the socket.
10/16 Amps
Frost protection / Transport
Preparation
1. Empty the condensation container page 4.
2. Select any programme using the programme selector.
condensation is pumped into the container.
4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to .Off
1.
Make sure that the air
inlet remains unobstructed
Clean and level
2.
3.
turn to Off Press and hold selection
then turn 3 x to the right turn to Off
Set
amperage
1 x to the
right
Feedback (depending on model): off
off
off
offoff
flashes
flashes
flashes
flashesflashes
10
10
10
1010 A
16
16
16
1616 A
Do not operate the dryer if
there is a danger of frost.
Do not set up the dryer behind a door or sliding
door as this may obstruct or prevent the dryer door
from opening. This will prevent a potentially fatal
danger to children from locking themselves in.
9
Technical data
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approximately 45 kg
Max. capacity 7 kg
Condensation container 4.2 l
Connection voltage
Connected load
Fuse protection see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Drum interior light (bulb E14, 25 W)(depending on model)
The drum lights up after the door is opened or closed, and after the programme starts,
Consumption rates (The value on the label is achieved at the maximum heat setting.)
Fabrics/programmes Residual moisture in the
fabrics after spinning
Drying time** Energy
consumption**
Cottons 7 kg 10 A 16 A 10 A 16 A
Cupboard Dry* 112 min 98 min 3.54 kWh 3.54 kWh1400 U/min (50%)
1000 U/min (60%) 131 min 115 min 4.13 kWh 4.13 kWh
800 U/min (70%) 150 min 133 min 4.72 kWh 4.72 kWh
Iron Dry* 93 min 69 min 2.55 kWh 2.55 kWh1400 U/min (50%)
1000 U/min (60%) 111 min 82 min 3.22 kWh 3.22 kWh
800 U/min (70%) 130 min 94 min 3.90 kWh 3.90 kWh
Easy-Care 3.5 kg
Cupboard Dry* 800 U/min (40%) 48 min 42 min 1.35 kWh 1.35 kWh
600 U/min (50%) 60 min 51 min 1.65 kWh 1.65 kWh
* Programme setting for testing in accordance with applicable standard EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of
laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded.
Fabrics/programmes Drying time Annual energy consumption
Cottons 7 kg / 3.5 kg*
Cupboard Dry 89 per cycle 497 per year*** min / kWh /
***Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories (from after-sales service using order number)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer must be fastened to the washing machine using this connection set.
WSMZ
20310
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed
after-sales service directory.
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The START/STOP indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
The display panel light and
indicator lights (depending on
model) go out and the
START/STOP indicator light
flashes.
Energy-saving mode is activated
see the separate instructions.Energy-saving mode
START/STOP indicator lamp
flash.
Empty the condensation container.
If featured, check hose for condensation outlet.
START/STOP indicator lamp
flash.
Clean the fluff filter and/or air cooler Page 4/6.
Dryer does not start. /STOP button selected?START
Door closed?
Programme set?
Ambient temperature greater than 5 Β°C?
Water is running out. Align dryer horizontally.
Clean air cooler seal.
The door opens by itself. Push the door closed until you hear it engage.
Creasing. Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
Drying result is not satisfactory
(laundry feels too damp).
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
Page 7.
Fine layer of limescale on the humidity sensors
Programme termination, e.g. tank full, mains power supply failure,
door open or maximum drying time reached.
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
Mains failure. Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
One or more indicator lights for
programme status are flashing.
Clean filter and air cooler Page 4/6.
Check installation conditions Page 8.
Switch off, leave to cool down, switch on again, restart
programme.
The interior light is not working
(depending on model).
Pull out the appliance plug, remove the cover cap in the interior
above the door (use Torx 20 screw driver) and replace the bulb.
Close the cover cap.
Never operate the dryer without a cover cap.
11
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
– in rooms inside the house.
– to dry fabrics.
The dryer must
NEVER...
– be used for other purposes than those described above.
– be modified in terms of its technology or attributes.
Dangers
– The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets.
Make especially sure that cigarette lighters are removed as they constitute an
explosion hazard.
– Do not lean or sit on the door risk of tipping.
Installation
– Secure loose cables tripping hazard.
– Do not operate the dryer if there is a risk of frost.
Mains
connection
– Connect the dryer according to specifications to an AC earthed socket, as
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/couplings and/or extension cables.
– Do not hold the appliance plug with wet hands risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead risk of electric shock.
Operation
– Only load the drum with laundry.
Check the contents before you switch the dryer on.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) fire/explosion hazard.
– Dust (e.g. coal dust, flour) poses a danger: do not use the dryer
explosion hazard.
– Do not put laundry containing foamed material/rubber in the dryer elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– Condensation is not drinking water and may be contaminated with fluff.
Defect
– Do not use the dryer if it is defective or if you suspect it is.
Repairs must only be carried out by the after-sales service.
– Do not use the dryer if the mains cable is defective. To avoid danger, only
have the defective mains cable replaced by the after-sales service.
– Always pull the mains plug out of the socket before changing the bulb for the
interior light risk of electric shock.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Dryer: pull out the appliance plug, cut off the mains cable from the then
appliance.
Dispose of at municipal waste disposal facility.
– Packaging: do not leave children alone with packing parts
risk of suffocation.
– All materials are environmentally sound and can be reused.
Dispose of in an environmentally-responsible manner.
Instructions
for installation and use
Tumble dryer
Observe the safety instructions on page 11.
Read these instructions and the separate
Energy-saving mode instructions before
operating the dryer.
en
1 2
Empty the condensation container.
... and adapt to indivi
Never start the dryer if it is damaged!
Inform your after-sales service. Ins
Sorting and lo
Remove all items from pockets.
Check for cigarette lighters.
The drum must be empty prior to loading.
See programme overview on page 7.
See also separate instructions for β€œWoollens ba
(depending on model)
Your new dryer
Congratulations - You have chosen a modern, high-quality Smeg
domestic appliance.
The condensation dryer is distinguished by its economical energy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Disposal in an environmentally-responsible manner
Dispose of packaging in an environmentally-responsible manner.
This appliance is labelled in accordance with the European
guideline
equipment - WEEE.
The guideline provides an EU-wide framework for the return and
recycling of old appliances.
For further information about our products, accessories,
spare parts and services, please visit: www.smeg.com
Intended use Preparing for installation, see Page 8
Selecting and adjusting th
washed with water.
Do not leave children
unsupervised near the dryer.
Keep pets away from the dryer.
The dryer can be operated by children 8 years old
and older, by persons with reduced physical,
sensory or mental abilities and by persons with
insufficient experience or knowledge if they are
supervised or have been instructed in its use by
a responsible adult.
Select the d
Press the S
Make sure your hands are dry.
Hold the plug only. Con
All buttons are
need to be tou
Only operate t
the fluff filter i
Contents Page
Additional
functions
Programme selector Time
remaining
Display panel
a longer drying time; e.g. for polyacrylics, polya
or acetate.
Reduces creasing and extends the anti-creasi
the program has ended.
End of programme in 1*-24 hours (Press button several times if required)
Can always be selected to the next full hour.)
0, 1, 2, 3 The drying result (e.g. Cupboard Dry) can be adjusted over three levels (1 - max. 3) for the ,Cottons
After one of these programmes has been finely adjusted, the setting is retained for the others.
Fine
adjustment
of the drying
result


Product specificaties

Merk: Smeg
Categorie: Wasdroger
Model: CDL73
Apparaatplaatsing: Vrijstaand
Soort bediening: Buttons, Rotary
Kleur van het product: Wit
Ingebouwd display: Ja
Breedte: 600 mm
Diepte: 650 mm
Hoogte: 850 mm
Netbelasting: 2800 W
Type lader: Voorbelading
Droogsysteem: Condensatie
Materiaal trommel: Roestvrijstaal
Uitgestelde start timer: Ja
Startvertraging: 24 uur
Resterende tijd indicatie: Ja
Geluidsniveau: 64 dB
Energie-efficiΓ«ntieklasse: B
Energie consumptie: 4.13 kWu
Jaarlijks energieverbruik: 497 kWu
Verlichting in trommel: Ja
Nominale capaciteit: 7 kg
AC-ingangsspanning: 220-240 V
AC-ingangsfrequentie: 50 Hz

Heb je hulp nodig?

Als je hulp nodig hebt met Smeg CDL73 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasdroger Smeg

Smeg

Smeg DN92SE Handleiding

21 November 2024
Smeg

Smeg DN83SE Handleiding

21 November 2024
Smeg

Smeg DN82SE Handleiding

21 November 2024
Smeg

Smeg DN72CE Handleiding

21 November 2024
Smeg

Smeg DN93SL Handleiding

21 November 2024
Smeg

Smeg DHT81EIT Handleiding

21 November 2024
Smeg

Smeg SACD7 Handleiding

20 November 2024
Smeg

Smeg DT393RU4 Handleiding

5 November 2024
Smeg

Smeg DN93SE Handleiding

5 November 2024
Smeg

Smeg DN03SE Handleiding

5 November 2024

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger