Smart-AVI RDU-2PS Handleiding

Smart-AVI AV extender RDU-2PS

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI RDU-2PS (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

NOTICE

T h e i n f o r m at i o n c o nt a i n e d i n t h i s d o c u m e n t

is subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular purpose.

Smart-AVI will not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance or use of this material.

No part of this document may be photocopied, reproduced or

translated into another language without prior written consent

from Smart-AVI.

For more information, visit www.smartavi.com.

SmartAVI, Inc. / Twitter: smartavi

2840 N. Naomi Ave. Burbank, CA 91504

Tel: (818) 565-0011 Fax: (818) 565-0020

http://www.SmartAVI.com

2-Port DVI-D and USB 1.1

Local/Remote Switch - Extends up to

275 feet over STP Cable

RDU- P2

2-Port DVI-D and USB 1.1 Extender

with Integrated Local/Remote Switch

www.smartavi.com

Installation

Manual

Technical Specications

What’s in the Box?

PART NO. QTY DESCRIPTION

RDU-2P-TX 1 2 DVI-D and USB switch with integrated ex-

tender, over CAT6 STP Extender Transmitter

RDU-2P-RX 1 2 DVI-D and USB switch with integrated ex-

tender, over CAT6 STP Extender Receiver

Power Supply 2 PS5VDC4A

VIDEO

Format DVI-D Single Line

Maximum Pixel Clock 165 MHz

Input Interface (TX) (2) DVI-D 29-pin female

Output Interface (RX) (1) DVI-D 29-pin female

Resolution Up to 1920 x 1200 @60Hz

DDC 5 volts p-p(TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

USB

Signal Type USB 1.1 (Fully Transparent)

Input Interface (TX) (2) USB Type B (Female)

Output Interface (RX) (4) USB Type A (Female)

OTHER

Power External 100-240 VAC/5VDC4A @20W

Dimensions 9 in W x 1 in H x 3 in D

Weight 1 lb

Operating Temp. 0-55 °C (32-131°F)

Storage Temp. -20-85 °C (-4-185 °F)

Humidity Up to 95%

RDU-2PRX Rear

RDU-2PRX Front

RDU-2PTX Rear

RDU-2PTX Front

275 ft over CAT5

RDU-2PTX RDU-2PRX

USB HARD DRIVE USB KEYBOARD USB MOUSE USB PRINTER

DVI-D MONITOR

COMPUTERCOMPUTER

Introduction

The RDU-2P is a perfect solution for sharing the output of

two computers from a remote location. It extends DVI-D

and USB 1.1 from two computers to a remote location up

to 275 feet away. Both the transmitter and receiver have

an integrated remote switch, allowing you to switch

between the two computers locally or from the remote

location. With its DDC learning capabilty, the RDU-2P is

fully plug-and-play.

Using the RDU-2P

1. To switch between the two sources, simply press

the SELECT button on the front of the RDU-2PTX

(locally) or RDU-2PRX (remotely).

2. The selected source will be indicated by the LED

lights on the front panel.

3. Activity will be indicated by the LEDs on the front

of the RDU-2PRX.

Learning the DDC

1. Disconnect the power from the RDU-2P-TX

(Transmitter).

2. Hold down the SELECT button while reconnecting

the power.

3. Continue to hold SELECT until both the 1 and 2

LEDs are both illuminated.

4. Release the SELECT button.

5. Use SELECT to alternate between the two DDC

modes of the RDU-2PTX. The two DDC learning

modes are 1:Learn Screen and 2: Factory Default.

6. When you have selected the desired learning

mode, wait 5 seconds for both LEDs to ash.

7. When the LEDs stop ashing, the DDC has been

learned.

Applications

• Medical Applications

• Industrial Work Areas

• Home Theater Integration

• Digital Signage Deployment

• Information Kiosks/Displays

• Film/Recording Studios

Features

• DDC from internal table for Mac/PC

• DDC learning from display

• Switches inputs locally and from the remote unit

• Supports Mac, PC, and Linux DVI

• Supports High Resolution 1920x1200 60Hz WUXGA

• Uses universal DVI Single Link connectors

• Zero pixel loss with TMDS signal correction

• Supports all USB 1.1 Devices Transparently

(Flash Drives, Printers, Cameras, Scanners, etc.)

• Supports USB 1.1 keyboard and mouse

• Front panel tactile port switch on both

the transmitter and receiver

Product - Installation Diagram

DDC provides plug-and-play capability to your

displays. When you plug a display into your

computer, the DDC table in the display tells the

computer the optimal resolution to use. In order

to preserve this plug-and-play capability, we have

integrated DDC learning into all of our DVI Solutions.

ABOUT DDC

Connecting the RDU-2P

1. Power o all devices.

2. Connect two DVI-D sources to the DVI-D ports of

the RDU-2PTX labeled and

3. Connect two USB sources to the USB ports of the

the RDU-2PTX labeled and

4. Connect the RDU-2PTX to the the RDU-2PRX with

two STP (Sheilded Twisted Pair) cables using the

rear ports labeled and

5. Connect a DVI monitor to the port on the

rear of the RDU-2PRX.

6. Connect up to 4 USB 1.1 devices to the ports

on the RDU-2PRX.

7. Connect the power supply to the ports on the

RDU-2PTX and RDU-2PRX.

8. Power on the RDU-2P using the front switch.

9. Power on the computers, displays and USB 1.1

devices.

IN 2IN 1

IN 2

IN 1

OUT

Product specificaties

Merk:	Smart-AVI
Categorie:	AV extender
Model:	RDU-2PS
Kleur van het product:	Zwart
Gewicht:	453.6 g
Snoerlengte:	6 m
Stroomvoorziening:	100 - 240VAC
LED-indicatoren:	Ja
Maximum resolutie:	1920 x 1200 Pixels
Volledige HD:	Ja
Aansluiting voor netstroomadapter:	Ja
Ondersteunde grafische resoluties:	1920 x 1200 (WUXGA)
Plug and play:	Ja
Video-ingang:	2
Maximale afstand:	83.8 m
Afmetingen (B x D x H):	228.6 x 76.2 x 25.4 mm
Video uit:	1
Bandbreedte:	165 MHz
Aansluiting video:	DVI
Stroomverbruik (typisch):	20 W
Aansluiting type:	DVI-D 29-pin, USB Type B, USB Type A