Skytec ODS50 Handleiding

Skytec Speaker ODS50

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec ODS50 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

100.019 – 100.020

100 Watts Passive 2-way

Speakerset

INSTRUCTION MANUAL

HANDLEIDING

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

Basis aansluiting / Basic connections / Connexions de base / Grundanschlüsse / Conexiones básicas:

SPECIFICATION:

Model 100.019 & 100.020

Power Max. 2x 100W

Impedance 8 Ohm

Freq. Range 50Hz - 20kHz

SPL @ 1W/1m 89dB

Congratulations to the purchase of our SkyTec speaker box.

Read the instructions thoroughly prior to using the unit.

SAFETY INSTRUCTIONS

• Hearing damage:

SkyTec loudspeakers are easily generating high

sound pressure levels (SPL) suicient to cause

permanent hearing damage to performers,

production crew and audience members. Care

should be taken to avoid prolonged exposure to

SPL in excess of 85 dB.

• Make sure that the amplier is switched o

when the speaker box is connected or

disconnected.

• The box must be installed by a qualied

technician who has knowledge of the

techniques.

• Do not overload the box to avoid damage to the

speakers.

• Connect the box only to a good quality

amplier:

Direct voltage at the amplier output will

damage the speakers

“Clipping” (overdrive) of the amplier can

damage the woofer, tweeter and horn speaker

• Do not overload the speakers to avoid damage

to the components.

• Do not place an open re (candle, etc.) on top

or next to the box - FIRE HAZARD

• For indoor use only. If the box is used outdoors,

you need to make sure that no humidity can

enter the box.

• Make sure that the box is placed on a stable,

solid surface.

• The boxes can be stacked but do not put more

than 60kg weight on the box.

• The boxes can be hung. Use only strong and

approved mounting material. The installation

should only be carried out by a qualied

technician who has knowledge of the

techniques and regulations regarding the

mounting/hanging of speaker boxes. During the

mounting, make sure that nobody is standing

below the mounting area.

• Use only stands which are designed to support

the weight of the speaker. Do not attempt to

place more than one speaker on a stand

designed for a single speaker.

• Do not place liquids on the box and protect it

against humidity. Humidity can shorten the life

time considerably.

• If the unit is damaged to an extent that internal

parts are visible, DO NOT connect the unit and

DO NOT switch it on. Contact your dealer or

Tronios.

• Never try to repair the unit yourself. It does not

contain any user serviceable parts. All repairs

must be carried out by a qualied technician.

• Set the amplier to the lowest volume prior to

switching it on.

• Keep the unit out of the reach of children.

Protect your environment. Recycle packing material

whenever possible.

Do not throw a faulty unit into normal household

waste but bring it to a special collection

point. A large part of it can be recycled.

CONNECTIONS:

First of all, check the specifications of the amplier if it is suitable for your speaker boxes. Pay particular

attention to the power rating and impedance.

Check if the amplier is switched o. If yes, you can connect the speakers. PLEASE NOTE! Watch the polarity

(+/-). Wires of the same colour must be connected to the same sign of every side i.e. the + of the amplier must

be connected to the + of the speaker box. If the connections are inverted, the sound quality will diminish.

Only use high quality speaker cables that are suitable for the power and distance between the amplier and the

speaker.

Connection of several speakers:

When a second speaker is connected in parallel the impedance will change from 8 Ohms to 4 Ohms. Check if

the amplier can handle this. If more that two speakers are connected in parallel, the impedance will go below 4

Ohms. Most of the ampliers can’t handle this!

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would

also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or

disrespect of the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a

disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

Product specificaties

Merk:	Skytec
Categorie:	Speaker
Model:	ODS50

Heb je hulp nodig?

Als je hulp nodig hebt met Skytec ODS50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Skytec

Skytec ODS65 Handleiding

24 Augustus 2023

Skytec SP Hi-End Passive Speaker 170.311 Handleiding

1 Juli 2023

Skytec SP Hi-End Passive Speaker 170.304 Handleiding

26 Juni 2023

Skytec SPJ Active Speaker with MP3 178.036 Handleiding

20 Juni 2023

Skytec SPJ Active Speaker 178.030 Handleiding

17 Juni 2023

Skytec 170.306 Handleiding

16 Juni 2023

Skytec SPA800Y PA Handleiding

16 Juni 2023

Skytec SPJ-800A Handleiding

12 Juni 2023

Skytec SPLED SERIES Handleiding

9 Juni 2023

Skytec SPJ800A Handleiding

5 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024

Extron SM 28 Handleiding

21 November 2024

JBL RM10 Handleiding

20 November 2024

JBL Performance IS6 Handleiding

20 November 2024

JBL Power P-Kit Handleiding

20 November 2024

JBL Performance P941 Handleiding

20 November 2024

JBL Performance P52OWS Handleiding

20 November 2024

JBL Performance PC600 Handleiding

20 November 2024

JBL Performance IS6DT Handleiding

20 November 2024