Sime Planet Super 4 F.S. Handleiding

Sime Ketel & boiler Planet Super 4 F.S.

Lees hieronder de đź“– handleiding in het Nederlandse voor Sime Planet Super 4 F.S. (12 pagina's) in de categorie Ketel & boiler. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Planet
Super 4 F. S.
User Instructions
GB
1
BOILER IGNITION (fig. 1)
Open the gas cock, lower the cover of the
control and activate the boiler by turning
the selector knob to the summer ( ).
position. When the green led ( ) lights up,
electricity is present in the boiler.
– With the selector knob on the summer
( ) position, the boiler works to take
the temperature of the hot water to the
fixed value.
– With the selector knob on the winter
position ( ) the boiler, once it has rea-
ched the temperature set on the heating
potentiometer, will begin to modulate
automatically in order t o suppl y t he
system with the effective power reque-
sted. The boiler will stop functioning if
the room stat or “Logica Remote Con-
trol” intercede.
TEMPERATURES ADJUSTMENT (fig. 2)
The panel of the red leds is graduated from
40÷80 °C and shows the temperature in
the D.H.W. tank when the two service leds
( ) are off; it shows the temperature
of the primary circuit when one of the two
leds is lit up.
– Regulation of the D.H.W. temperature is
carried out by acting on the hot-water
service knob ( ). The set temperature
is displayed on the scale of the red leds
from 40 ÷80 °C.
– Regulation of the C.H. temperature is
carried out by acting on the heating knob
( ). The set temperature is shown on
the scale of the red leds from 40÷80 °C.
To guarantee an always optimal output
from the generator it is advised not to
go below a minimum operating tempera-
ture of 50 °C.
TURNING OFF BOILER (fig. 1)
To turn the boiler off place the selector
knob on the position. OFF
IF THE BOILER IS NOT GOING TO BE USED
FOR A LENGTHY PERIOD IT IS ADVISED TO
TURN OFF T HE ELECTRICIT Y SUPPLY,
CLOSE THE GAS COCK, AND IF LOW TEM-
PERATURES ARE FORESEEN, EMPTY THE
BOILER AND THE HYDRAULIC SYSTEM TO
AVOID BREAKAGE IN THE TUBES DUE TO
THE FREEZING OF THE WATER.
CLEANING AND MAINTENANCE
The programmed maintenance of t he
appliance must be carried out annually by
authorised technical staff.
USER INSTRUCTIONS
LIGHTING AND OPERATION
VERY IMPORTANT!
PLEASE MAKE SURE YOUR LOG BOOK ENCLOSED IS FILLED IN CORRECTLY.
ALL CORGI REGISTERED INSTALLERS CARRY A CORGI ID CARD.
BOTH SHOULD BE RECORDED IN YOUR CENTRAL HEATING LOG BOOK.
YOU CAN CHECK YOUR INSTALLER IS CORGI REGISTERED
BY CALLING ON 01256 372300
SPIA VERDE
Fig. 1
SPIA GIALLASPIA ROSSA
Fig. 2
GREEN LED
RED LED YELLOW LED

Product specificaties

Merk: Sime
Categorie: Ketel & boiler
Model: Planet Super 4 F.S.

Heb je hulp nodig?

Als je hulp nodig hebt met Sime Planet Super 4 F.S. stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ketel & boiler Sime

Sime

Sime UNIQA REVOLUTION 25 Handleiding

3 November 2024
Sime

Sime RX 26 BF Handleiding

3 November 2024
Sime

Sime Murelle EV HE 25/55 Handleiding

9 Juli 2023
Sime

Sime Murelle EV HE 30/55 Handleiding

8 Juli 2023
Sime

Sime Format 30 HE Handleiding

6 Juli 2023
Sime

Sime Planet Super 4 F.S. Handleiding

3 Juli 2023
Sime

Sime Dewy 30 HE WM Handleiding

3 Juli 2023
Sime

Sime Dewy 50 HE WM Handleiding

3 Juli 2023
Sime

Sime Format System 25 HE Handleiding

28 Juni 2023
Sime

Sime Planet Super 4 W.M. Handleiding

25 Juni 2023

Handleiding Ketel & boiler

Nieuwste handleidingen voor Ketel & boiler

Kospel

Kospel PPE4.L-24 Handleiding

3 November 2024
Kospel

Kospel PPE4.M-18 Handleiding

3 November 2024
Kospel

Kospel PPE4.B-21 Handleiding

3 November 2024
Kospel

Kospel PPE4.B-18 Handleiding

3 November 2024
Daikin

Daikin EKHWSU200BA3V3 Handleiding

22 Oktober 2024
Daikin

Daikin EKHWSU300BA3V3 Handleiding

22 Oktober 2024
Daikin

Daikin EKUHWBB Handleiding

22 Oktober 2024
Daikin

Daikin FBV26P Handleiding

22 Oktober 2024
Daikin

Daikin FBH26P Handleiding

22 Oktober 2024
Daikin

Daikin EKHH2E260PAAV3 Handleiding

22 Oktober 2024