Siemens WM16S444 Handleiding

Siemens Wasmachine WM16S444

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM16S444 (10 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 209 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

1 2 3 4 5 6

:c :- 90 °C Temp. Select the temperature ( = cold)

c - S1600* U/min (rpm) elect the spin speed (* depending on the model) or (Rinse hold = no final

spin), laundry remains in the water after the final rinse, - - - appears in the display

panel).

1 - 24 h Fertig in (Finished in) Programme end after

Status indicators Programme status indicators:

tüümüü üc - - - -¯ Wash, rinse, spin, programme duration or end ( ¯ )

sChildlock apage 5

rOpen the washing machine door, add laundry apage 4, 5

Programme selector Display panel /

Options buttons

Start/

Reload

Additional

functions

Sorting and loading the laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load .apage 7

Observe the important information page 9.a

Insert items of laundry of varying sizes.

Close the washing machine door. Take care not to trap items of laundry between the washing

machine door and the rubber seal.

Adding detergent and care products

Measure accordingly:

The amount of laundry, level of soiling, water hardness (ask your water supply company) and

manufacturer's instructions.

On models without an insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

During operation: open the detergent drawer with care.

Individual settings

ʑSignal

ʑStart/ Nachlegen (Start/Reload)

To start the programme or to subsequently load additional laundry, and to activate/deactivate the childlock.

2. Set the volume

for ...

Set to 1 step, the

display panel

lights up

Press and

hold +1 step, release

Set to 

skip

Button signals Information signals

Set the

volume*

1 step Set the

volume*

* you may need to select

the function several

times.

1. Activating the

mode for setting the

signal volume

¢ ¢



Insert for liquid detergent (depending on model), page 10

Compartment II: detergent for main wash,

water softener, bleach, stain remover

Your washing machine Intended use

Contents Page

ʔIntended use .......................................................................................................................... 1

ʔProgrammes .......................................................................................................................... 1

ʔSetting and adjusting the programme ............................................................................. 3

ʔWashing ..............................................................................................................................3/4

ʔAfter washing ........................................................................................................................ 4

ʔIndividual settings ............................................................................................................5/6

ʔOverview of programmes ................................................................................................... 7

ʔSafety instructions ................................................................................................................ 8

ʔConsumption values ............................................................................................................8

ʔImportant information .........................................................................................................9

ʔInsert for liquid detergent ................................................................................................ 10

ʔCare ...................................................................................................................................... 10

ʔInformation on the display panel ................................................................................... 10

ʔInstructions for blockages ............................................................................................... 11

ʔWhat to do if.................................................................................................................. 12/13

ʔEmergency release............................................................................................................ 13

ʔAfter-sales service.............................................................................................................. 13

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of laundry for the relevant

programme.

– Wash normally soiled laundry without a prewash.

– The selectable temperatures apply to the care labels on the textiles. The

temperatures in the machine may deviate from this so that you get the optimum mix

of energy-saving and washing results.

– Measure the detergent according to the manufacturer's instructions and water

hardness.

– If you want to dry the laundry in the tumble dryer afterwards, select a spin speed

suggested by the dryer manufacturer.

Preparation Before washing for the first time

Run a wash cycle without any laundry page 9a

Set* and adjust the programme 1

Washing

Compartment ~: fabric softener, starch

Compartment I: detergent for prewash

ʔFor domestic use only

ʔFor washing machine-washable fabrics and hand-washable wool in

detergent solution

ʔTo be operated with cold drinking water and commercially available

detergents and care products which are suitable for use in washing

machines.

– Do not leave children unattended near the washing machine.

– The washing machine is not to be used by children or persons

not familiar with the operating instructions.

– Keep pets away from the washing machine.

Dilute thick fabric softener and conditioner with water.

This prevents blockages.

Detergent drawer

with compartments I, II, ~

Control panel

Washing machine

door handle

Service flap

Washing machine door

Install correctly, according to the separate

installation instructions.

Check the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connect the mains plug

– Make sure your hands are dry.

– Take hold of the plug only.

Turn the tap on

*If the symbol is lit in the display s

panel, Childlock active Deactivate it,a

page 5.

Additional functions and options buttons

aIndividual settings, page 5

Press Start Nachlgen

(Start/Reload)

Washing

End of programme when ...

... the / button is off and - Start Nachlegen (Start/Reload) ¯- appears in

the

display panel.

If the display panel lighting is off, press any button

a Energy-saving mode, .page 5

Cancel the programme

Programmes at high temperatures:

– .To cool the laundry: select (Rinse)Spülen

– (Press /NachlegenStart Start/Reload).

Programmes at low temperatures:

–Select (Spin) or (Empty).Schleudern Abpumpen

– (Press /NachlegenStart Start/Reload).

Change the programme if...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– (Press /NachlegenStart Start/Reload). The new programme starts

from the beginning.

Top up laundry, if ... a page 5

... Start/ tart/ ) is pressed and then of theNachlegen (S Reload both

§ Ç¯+rsymbols are lit in the display panel. If is lit, the washing

machine door cannot be opened.

Press the /Nachlegen /Reload) button.Start (Start

Individual settings

ʑOptions buttons

The spin speed and temperature can be changed before and during the selected programme. The effects depend on

the programme progress.

ʑTemp.

You can change the displayed washing temperature. The maximum washing temperature that can be selected

depends on the programme that has been set.

ʑU/min / (Spin speed rpm) c(Rinse hold = no final spin)

You can change the spin speed shown or select c( =Rinse hold no final spin, laundry remains in the water after the

last rinse, appears in the display panel). You can change the spin speed shown. The maximum selectable spin ---

speed depends on the model and on which programme is currently selected.

ʑFertig in (Finished in)

When you select the programme, the relevant progr. duration is displayed. You can delay the start of the programme be-

fore it begins. The "Finished in" time can be set in increments of one hour up to a max. of 24 hours. Press the

Fertig in (Finished in) button repeatedly until the desired number of hours is displayed (h = hour).

Press /Nachlegen /Reload).Start (Start

ʑAdditional functions a and overview of programmes, page 7

i speed Perfect For washing in a shorter time with a washing result comparable to that of the standard

programme. Maximum load Overview of programmes,a page 7.

¢ eco Perfect For saving energy with a washing performance comparable to that of the standard programme.

Knitterschutz

(Easy-Iron)

Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed. Residual

moisture in the laundry is increased slightly.

Extraspülen

(Extra rinse)

Additional rinse cycle. For areas with very soft water or for further enhancing the washing

result.

ʑChildlock

in the display panel

You can lock the washing machine to prevent the functions you have set from being changed

inadvertently.

ON/OFF: Start Start after the start/end of the programme, press and hold /Nachlegen ( /

Reload) for approx. 5 seconds.

Note: The childlock can remain activated until you wish to start the next programme, even after

switching off the machine.

Then you can deactivate the childlock before starting the programme and activate it again as

necessary once the programme has started.

Note:

–The symbol is lit: Childlock active.s

–The symbol flashes: Childlock active and then the programme selector is altered. s

To prevent the programme from stopping, move the programme selector back to the

original programme, the symbol is lit again.s

ʑAdd laundry

§ o+rüin the

display panel

If you want to add additional items of laundry after the programme has started, press the Start/

Nachlegen Reload(Start/ ) button. The machine checks whether adding laundry is possible.

§ +r are lit: Adding laundry is possible.

Ç¯ §flashing: Wait until +r are lit.

Note: Only open the washing machine door when the symbols are lit.both § +r

Ç¯: It is not possible to add laundry.

Note: for safety reasons, the washing machine door remains locked when the water level and/

or temperature is high, or during spinning.

To continue the programme, press the /Nachlegen /Reload) button.Start (Start

ʑEnergy saving mode

If the washing machine is switched on and is not operated for several minutes before the programme starts or at the

end of the programme, the display panel light goes out and the / button flashes.Start Nachlegen (Start/Reload)

Press any button to turn the light back on.

All buttons are sensitive and need only

to be touched lightly. If you press and

hold the Fertig in (Finished in) option

button, the appliance automatically runs

through the settings options.

Programmes

Detailed overview of programmes .apage 7

Temperature and spin speed can be selected individually,

depending on the selected programme and programme progress.

Baumwolle (Cottons) Hard-wearing fabrics

+ Vorwäsche (Prewash) Hard-wearing fabrics, prewash at 30 °C

Pflegeleicht (Easy-Care) Easy-care fabrics

+ Vorwäsche (Prewash) Easy-care fabrics, pre-wash at 30 °C

Schnell/ Mix Different types of laundry

Fein/Seide

(Delicate/Silk)

Delicate washable fabrics

ÿüWool Hand/machine-washable wool

Spülen (Rinse) Power rinse + with spin

Schleudern (Spin) Extra spin with selectable spin speed

Abpumpen (Empty) Empty the rinsing water when c

(Rinse hold = no final spin) is activated

Schonschleudern

(Gentle Spin)

Extra spin with reduced spin speed

Super15 Super Quick programme

Outdoor All-weather, sportswear and outdoor wear

apage 9

Shirts/Business Non-iron shirts

Hygiene Especially suitable for increased hygienic

demands or particularly sensitive skin on

account of prolonged washing at a defined

temperature, with a higher water level and

longer rinsing cycle

Switch off

Turn the programme selector to (Off) .Aus

Turn off the tap

Not required for AquaStop models aRefer to Installation

instructions.

Remove the washing

Open the washing machine door and remove the washing.

If (Rinse hold = no final spin) active: turn the programme selector to 

Abpumpen Schleudern (Empty) or (Spin). Select the spin speed if

necessary.

Press /Nachlegen /Reload).Start (Start

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent drawer open

so that any residual water can dry away.

Congratulations äyou have chosen a modern, high-quality domestic appliance

manufactured by Siemens. This washing machine is distinguished by its economical

water and energy consumption.

Each machine that leaves our factory has been inspected thoroughly to ensure that it

functions properly and is in perfect condition.

For more information on our products, accessories,

replacement parts and services, see our website www.siemens-home.com

or contact our after-sales service centres.

Programme selector for switching the

machine on and off and for selecting the

programme. Can be turned in either

direction.

Drum interior light

(depending on model) comes on

when the door is opened or

closed, or when a programme is

started; goes out automatically.

Overview of programmes aCheck the consumption values table on page 8 and the instructions on page 9.

* reduced load when using the additional Perfect functioni speed .

As a Mix is ideal, when maximum spin speed is selected.short programme, Schnell/ 40 °C

Programmes without prewash - add detergent to compartment , programmes with prewash - distribute the detergent between compartments and .II I II

Programmes °C max. Type of laundry Additional functions; options; information

Baumwolle (Cottons) : - 90 °C

8 kg/

5 kg*

Hard-wearing fabrics, heat-resistant fabrics made of

cotton or linen

i speed *, eco , KnitterschutzPerfect ¢ Perfect (Easy-Iron),

Extraspülen (Extra rinse); (Rinse hold = no final spin) c

+ Vorwäsche (Prewash)

Hygiene :c- 40 °C Hard-wearing fabrics, heat-resistant fabrics made of

cotton or linen

i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , , ;

Especially suitable for increased hygienic demands or particularly

sensitive skin on account of prolonged washing at a defined

temperature, with a higher water level and longer rinsing cycle

Pflegeleicht (Easy-Care) : - 60 °C 4 kg Easy-care fabrics made of cotton, linen, synthetic fibres

or blended fabrics i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , ; 

+ Vorwäsche (Prewash)

Schnell/ Mix - 40 °C 3.5 kg Fabrics made of cotton or easy-care fabrics:c i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , ; ;

different types of laundry can be washed together

Fein/Seide (Delicate/Silk) - 40 °C:c

2 kg

For delicate, washable fabrics, e.g. made of silk, satin,

synthetic fibres or blended fabrics (e.g. curtains)

i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , ; ;

no spin between the rinse cycles

ÿ Wool :c- 40 °C Hand or machine-washable fabrics made of wool or

containing wool

;

Particularly gentle wash programme to prevent shrinkage of laundry.

Longer programme breaks (fabrics rest in the detergent solution)

Super15 :c- 40 °C Easy-care fabrics made of cotton, linen, synthetic fibres

or blended fabrics

;

Short programme, approx. 15 minutes, suitable for lightly soiled laundry

Shirts/Business :c- 40 °C Non-iron shirts made of cotton, linen, synthetic fibres or

blended fabrics

i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , ;

c(Rinse hold = no final spin); spin only briefly, then hang up to drip dry

Outdoor :c- 40 °C All-weather, sports and outdoor wear fabrics including

fabrics with weatherproof membrane

i speed *, eco , Knitterschutz ExtraspülenPerfect ¢ Perfect , ; ;

reduced final spin in intervals

Additional programmes Spülen , Schleudern , Abpumpen , Schonschleudern (Rinse) (Spin) (Empty) (Gentle Spin)

9410 / 9001050070

*1050070* WM16S444

Siemens Electrogeräte GmbH

Carl-Wery-Str. 34

81739 München / Deutschland

Safety instructions

– Read the Instruction Manual and Installation Instructions and all other information enclosed with the washing

machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull on the cable to disconnect the mains plug.

– Only insert/pull out the mains plug with dry hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent children from

locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain

remover/cleaning solvent may cause an explosion after being loaded into the

washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when emptying hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

Consumption values

Programme Load Electricity Water*** *** Programme

duration***

Baumwolle (Cottons) 20 °C 8 kg 0,23 kWh 76 l 2 hA

Baumwolle (Cottons) 40 °C* 8 kg 0,97 kWh 76 l 2 hB

Baumwolle (Cottons) 60 °C 8 kg 1,36 kWh 76 l 2 hB

Baumwolle (Cottons) 90 °C 8 kg 2,34 kWh 87 l 2 hA

Pflegeleicht (Easy-Care) 40 °C* 4 kg 0,71 kWh 62 l 2 h

Schnell/ Mix 40 °C 3,5 kg 0,47 kWh 49 l 1 h

Fein/Seide (Delicate/Silk) 30 °C 2 kg 0,14 kWh 35 l hB

ÿ Wool 30 °C 2 kg 0,16 kWh 40 l hB

* Programme setting for testing in accordance with applicable standard EN60456.

Note on comparative tests: When using the test programmes, wash the specified load using the maximum spin speed.

Programme Additional function Load Annual energy

consumption

Annual water

consumption

Baumwolle eco (Cottons) ~ ¢ Perfect ** 8/4 kg 137 kWh 10560 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 °C).

*** The values may deviate from the specified values depending on water pressure, water hardness, and inlet temperature,

ambient temperature, type, amount and level of laundry soiling, detergent used, fluctuations in the power supply and

selection of additional functions.

Important information

Before washing for the first time

Do not put any laundry in the machine. Turn the tap on. Pour the following into compartment :II

–approx. water1 litre

– detergent (amount to be used according to the manufacturer's instructions for light soiling and according to water

hardness)

Turn the programme selector to (Easy-Care) and press /Nachlegen /Reload).Pflegeleicht 60 °C Start (Start

At the end of the programme, turn the programme selector to (Off).Aus

Protecting the laundry and the machine

– When measuring detergent, care products and cleaning agents, follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Loading laundry

Insert items of laundry of varying sizes.

Take care not to trap items of laundry between the washing machine door and the rubber seal.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light Do not pre-wash. If required, select the additional Perfect function.ispeed

Pretreat any stains as necessary.

heavy Do not load as much laundry. Select the programme with Prewash.

Soaking Load laundry of the same colour.

–Pour soaking agent/detergent into compartment in accordance with the manufacturer's instructions. II

– (Turn the programme selector to (Cottons) and press /NachlegenBaumwolle 30 °C Start Start/Reload).

– (SAfter approx. 10 minutes, press Start/Nachlegen tart/ ) to stop the programme. Reload

–After the required soaking time, press /NachlegenStart (Start/Reload) again to continue the programme, or change

the programme.

Starching Laundry must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour starch into the fabric softener com-~

partment in accordance with the manufacturer's instructions (rinse first if necessary).

Dyeing / bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye

manufacturer's instructions. Do use the washing machine for bleaching clothes.not

Outdoor Laundry must not be treated with fabric softener.

Special detergent suitable for machine washing is available particularly in sports shops. For dosage information, see the

manufacturer's instructions. Special detergent for outdoor clothing in compartment II.

Turn the programme selector to . Select the temperature and /Nachlegen /Reload)üOutdoor Start (Start .

Insert for liquid detergent model-dependent

Position the insert for dispensing liquid detergent:

–Remove the detergent drawer completely apage 10.

– Slide the insert forwards.

Do not use the insert (slide upwards):

– For gel-type detergents and washing powder,

–For programmes with + (Prewash) or (Finished in) optionVorwäsche Fertig in

Care

ʑMachine housing, control panel

– Remove detergent residue immediately.

– Wipe with a soft, damp cloth.

– Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1. Pull out, press insert down, remove drawer completely.

2. To remove the insert: press the insert upwards from below with your finger.

3. Clean the detergent dispenser tray and insert with water and a brush and dry it.

4. Fit the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

ʑDrum

Leave the washing machine door open so that the drum can dry out.

Use chlorine-free cleaning agent, not steel wool.

ʑDescaling Ensure there is no laundry in the machine

This should not be necessary if the correct detergent dosage has been used. If it is necessary, however, proceed

according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via our website or

from our after-sales service ( ).apage 13

Instructions in the display panel depending on model

r flashing Close the washing machine door properly; laundry may be caught.

§ ³Å É: , Open the tap completely, supply hose kinked or trapped; Clean the filter ,apage 11

water pressure too low.

§ ³µ:Detergent solution pump blocked; Clean the detergent solution pump apage 11.

Drain hose/waste pipe blocked; Clean the drain hose at the siphon .apage 11

§ ´: Water in the base tub, appliance leaking. Call the after-sales service.

Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the display appears again,

call the after-sales service apage 13.

–Risk of electric shock. Disconnect the mains plug.

–Risk of explosion. No solvents.

Information about blockages

Detergent solution pump

Turn the programme selector to (Off) and disconnect the mains plug.Aus

1. Open and remove the service flap.

2. Take the drain hose out of the retainer.

Remove the sealing cap, allow the detergent solution to flow out.

Push the sealing cap back on.

3. Unscrew the pump cover carefully (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent

solution pump must be able to rotate).

5. Replace the pump cover and screw it on tightly. The handle points upright. Replace the

drain hose in the holder.

6. Refit the service flap and close it.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment and start the (Empty) programme.II Abpumpen

Drain hose on the siphon

Turn the programme selector to (Off) and disconnect the mains plug.Aus

1. Loosen the hose clamp, remove the drain hose carefully (residual water).

2. Clean the drain hose and siphon connecting piece.

3. Reattach the drain hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock

Do not immerse the AquaStop safety device in water (contains electric valve).

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except (Spin) / (Empty)).Schleudern Abpumpen

3. Press /Nachlegen /Reload). Let the programme run for approximately 40 Start (Start

seconds.

4. Turn the programme selector to (Off) Disconnect the mains plug.Aus .

Clean the filter:

5. Disconnect the hose from the tap.

Clean the filter with a small brush.

and/or on standard and Aquasecure models:

Remove the hose from the back of the appliance,

Remove the filter using pliers and clean the filter.

6. Connect the hose and check for leaks.

Risk of scalding!

– Allow the detergent solution to cool down.

– Turn off the tap.

What to do if...

Water is leaking out. – Attach/replace the drain hose correctly.

– Tighten the screw connection of the supply hose.

ʑNo water supply.

Detergent not flushed into

machine.

– (Start/Nachlegen Start/Reload) not pressed?

– Tap not turned on?

–Filter blocked? Clean the filter apage 11.

– Supply hose kinked or trapped?

ʑWashing machine door cannot

be opened.

–Safety function active. Programme stopped? .apage 4

– (Rinse hold = no final spin) selected? apage 3, 4.

–Can be opened by emergency release only? apage 13.

ʑProgramme does not start. /Nachlegen–Start (Start/Reload) pressed or (Finished in) time selected?Fertig in

– Washing machine door closed?

–Childlock active? Deactivate .apage 5

ʑDetergent solution does not

empty.

– (Rinse hold = no final spin) selected? apage 3, 4.

–Clean the detergent solution pump apage 11.

– Clean the waste pipe and/or drain hose.

ʑWater not visible in the drum. – Not a fault - water below the visible area.

ʑSpin result not satisfactory.

Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has interrupted the spin

because the laundry is unevenly distributed.

Distribute large and small items of laundry evenly in the drum.

–Knitterschutz (Easy-Iron) selected? apage 5.

–Speed selected too low? .apage 5

ʑThe programme duration

changes during the washing

cycle.

– Not a fault - the programme sequence is optimised for the relevant washing

process. This can cause changes in the programme duration in the display panel.

ʑRepeated spin start-up. – Not a fault - unbalanced-load detection system is adjusting the imbalance.

ʑResidual water in the com-~

partment for care products.

– Not a fault - the action of the care product is not affected.

–Clean the insert if necessary .apage 10

ʑOdour formation in the washing

machine.

–Run the Baumwolle 90 °C(Cottons) programme on the empty washing machine.

Use standard detergent.

ʑStatus indicator flashing.³t

Detergent may escape from the

detergent drawer.

–Too much detergent used?

Mix 1 tablespoon of fabric softener with ½ litre water and pour the mixture into

compartment . II (Not for outdoor textiles or those made with down.)

– Reduce the detergent dosage for the next wash cycle.

ʑPronounced generation of

noise , vibration and

“wandering” during the

spin cycle.

–Are the appliance feet fixed?

Secure appliance feet .aInstallation instructions

–Transportation safety devices removed?

Remove transportation safety devices .aInstallation instructions

ʑNoises during spinning and

emptying.

–Clean the detergent solution pump apage 11.

ʑDisplay panel/indicator lamps

do not function during

operation.

– Power cut?

– Circuit breakers tripped? Switch the circuit breakers back on or replace.

– Energy saving mode active?

– If a fault occurs repeatedly, call the after-sales service.

ʑProgramme sequence longer

than usual.

– Not a fault - unbalanced-load detection system is adjusting the imbalance by

repeatedly redistributing the laundry.

– Not a fault - foam detection system active - adds an additional rinse cycle.

ʑThere are detergent residues on

the laundry.

– In isolated cases, phosphate-free detergents contain water-insoluble residues.

–Select (Rinse) or brush down the laundry after washing.Spülen

What to do if...

In Add laundry mode,

Start Start/Nachlegen ( /Reload)

flashes very quickly and a signal

sounds

– Water level too high. Not possible to add more laundry. Close the washing

machine door immediately if necessary.

– (Press /NachlegenStart Start/Reload) to continue the programme.

If you cannot correct a fault yourself (switching on/off) or a repair is required:

–Turn the programme selector to (Off) and pull the mains plug out of the socket.Aus

–Turn off the tap and call the after-sales service apage 13.

Emergency release e.g. in the event of a power cut

The programme continues when the power supply is restored. However, if the laundry has to be removed,

the washing machine door can be opened as follows:

Risk of scalding

The detergent solution and laundry may be hot. If possible, leave to cool down.

Do not reach into the drum if it is still rotating.

Do not open the washing machine door if water can be seen through the glass.

1. Turn the programme selector to (Off) and pull out the mains plug.Aus

2. Empty the detergent solution apage 11.

3. Pull the emergency release downwards with a tool and release.

Washing machine door can then be opened.

After-sales service

ʑIf you cannot remedy the fault yourself (What to do if ..., ), contact our after-sales service. We will apage 12, 13

always find a suitable solution to avoid unnecessary visits by repair personnel.

ʑThe contact details of your nearest after-sales service can be found here or in the after-sales service directory

(model-dependent).

–GB 0844 892 8999 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply).

–IE 01450 2655 0.03 € per minute at peak. Off peak 0.0088€ per minute.

ʑPlease give the after-sales service the product number (E-Nr.) and the production number (FD) of the appliance.

Product number Production number

This information can be found:

on the inside of the washing machine door* /

open service flap* and on the rear of the appliance.

*depending on the model

ʑTrust the manufacturer's competence. Turn to us.

By doing so, you will ensure that the repair is carried out by trained service technicians equipped with original spare

parts

siemens-home.com/welcome

your

product

online

Washing machine

WM16S444

en operating instructions

Observe the safety instructions on page 8.

Read these instructions and the separate installation

instructions before operating the washing machine.

1 2

:c :- 90 °C Temp. Select the temperature (

c - S1600* U/min (rpm) elect the spin speed (* depending on the model) or

spin), laundry remains in the water after the final rin 

panel).

1 - 24 h Fertig in (Finished in) Programme end after

Status indicators Programme status indicators:

tüümüü üc - -¯ Wash, rinse, spin, programme duration or end ( ¯

sChildlock a

rOpen the washing machine door, add laundry a

Programme selector Display panel /

Options buttons

Additional

functions

Close the washing machine door. Take care not to trap i

The amount of laundry, level of soiling, water hardne

