Siemens WM12P260GC Handleiding

Siemens Wasmachine WM12P260GC

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM12P260GC (10 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
1 2 3 4 5 6
Display panel
Function buttons/Option buttons
Programme selector Start/Pause
¥Êɯ ¥Ê°C (Temperature) Select the temperature ( = cold)
- - - - – * (Spin speed) Select the spin speed (* depending on model) or³¯¯
- - - - (Rinse hold = without final spin, the washing remains in
the final rinsing water, - - - - on the display panel)
³¤ ¤ (Ready in) Programme ends in ...
Status displays Programme progress displays:
tüümüü üc §Ê Washing, Rinse, Spin, programme duration or end
- - PauseÆ
sChildproof lock aPage 5
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
rotated in either direction.
Individual settings
ʑSignal
1. Activate setting mode for signal volume
2. information signalsa) Selecting volume of the
2. button signalsb) Selecting volume of the
+
Activating the
setting mode
set to press and
hold
rotate it one
step to the
right
press the button and hold
down for aprox. 5 sec., until
display elements are lit;
setting mode is activated
set to , setting mode for
signal volume is left
press the button until
the required volume is
reached
or
rotate it one
step to the
right
press the button until the
required volume is reached set to , setting mode
for signal volume is left
Sorting and inserting the washing
Follow manufacturer’s care information!
According to the information on the care labels.
According to type; colour; soiling and temperature.
Do not exceed maximum load. aPage 7
Follow important instructions! Page 9a
Insert large and small items of washing!
Close the door. Do not jam items of washing between the washing machine
door and rubber seal.
Add detergent and care product
Dose according to:
amount of washing, soiling, water hardness (available from your water utility
company) and manufacturer’s instructions.
For models without insert for liquid detergent:
Pour liquid detergent into corresponding dispenser and place in drum.
Caution when opening the detergent drawer while the appliance is running!
Insert for liquid detergent (depending on model), Page 10
Your washing machine Intended use
Contents Page
ʋIntended use ....................................................................................... 1
ʋProgrammes........................................................................................ 1
ʋSelecting and adjusting a programme........................................... 3
ʋWashing ........................................................................................... 3/4
ʋAfter washing ...................................................................................... 4
ʋIndividual settings........................................................................... 5/6
ʋOverview of programmes ................................................................. 7
ʋSafety instructions .............................................................................. 8
ʋConsumption values .......................................................................... 8
ʋImportant information ........................................................................ 9
ʋInsert for liquid detergent ...............................................................10
ʋCare/Cleaning...................................................................................10
ʋInformation on the display panel...................................................10
ʋMaintenance......................................................................................11
ʋWhat to do if … ................................................................................12
ʋEmergency lock release .................................................................13
ʋCustomer service .............................................................................13
Protection of the environment/Hints and tips
Utilise the maximum amount of washing for the particular
programme.
Wash normally soiled washing without prewash.
Instead of the programme, select ÊCottons 90 °C
ºIntensive 60 °C. Comparable cleaning result with
significantly lower energy consumption.
Meter detergent according to the manufacturer’s instructions
and water hardness.
If the washing is then dried in the tumble dryer, select spin speed
according to the instructions of the dryer manufacturer.
Preparation Before using your washing machine for the first time
wash once without any washing Page 9a
Selecting ** and adjusting a programme 1
2
Washing
Dispenser ~: Fabric softener, starch
Dispenser I: Detergent for prewash
ʋfor use in the household only,
ʋfor washing machine-washable textiles and hand-
washable wool in wash liquor,
ʋto be operated with cold drinking water and commercially
available detergents and care products which are suitable
for use in washing machines.
ʋThe washing machine may be operated by children from
8 years of age, by persons who have limited physical,
sensory or mental abilities and by persons who have
inadequate experience or knowledge, provided they are
supervised have been instructed or by a responsible
person.
Do not leave children unattended near the washing
machine!
Children must not play with the appliance.
Children must not perform any cleaning or
maintenance work without supervision!
Keep pets away from the washing machine!
Dilute viscous fabric softener and fabric conditioner with water.
Prevents blockage of the overflow.
Detergent drawer
with dispensers I, II, ~
Fascia
Service flap
Door
Correct installation according
to separate installation instructions.
Checking the machine
Never switch on a damaged machine!
Inform your customer service!
Insert mains plug
With dry hands only!
Take hold of the plug only!
Turn on the tap
Washing
End of programme when ...
... is indicated on the display panel.§Ê
Cancelling the programme
For programmes at high temperature:
– Cool washing: Select .mRinse
– Press /Pause button.Start
For programmes at low temperature:
– Select Spin/
/
/
//Empty l (if only a drained cycle
is required: Set (Spin speed) to - - - -).
– Press /Pause button.Start
Change programme if ...
... you have mistakenly selected a wrong programme:
– Reselect programme.
– Press /Pause button. The new programme Start
starts from the beginning.
Interrupt/continue
the wash cycle ...
... e.g. for Soaking. aPage 9
Press the Start/ button. - - is indicated on the Pause Æ
display panel, washingmachine door cannot be opened.
To continue the programme, press the /Pause Start
button.
Individual settings
ʑFunction buttons
You can change the spin speed and temperature beforehand and while the selected
programme is running. Effects dependent on the programme progress.
°C (Temperature)
You can change the indicated washing temperature. The maximum washing temperature
which can be selected depends on the set programme.
(Spin speed, revolutions per minute)/
;
(Rinse stop = without final spin)
You can change the indicated spin speed or select ; (Rinse hold = without final spin cycle,
washing remains in the water after the last rinse cycle, display panel - - - -). The selectable
maximum spin speed depends on the model and the selected programme.
(Ready in)
The respective programme duration is displayed by selecting the programme.
The programme start can be delayed before the programme begins. The Ready in time can
be set in hour steps up to maximum 24h. Keep pressing the (Ready in) button until the
required number of hours is indicated (h=hour). Press /Pause button. Start
ʑOption buttons aOverview of programmes, Page 7
speedPerfect iFor a shorter wash time with a comparable washing effect
to the standard programme. Maximum load size.
aOverview of programmes, Page 7
ecoPerfect ¢For saving energy with a comparable washing effect to the standard
programme.
Easy Iron ÎSpecial spin sequence with subsequent fluffing. Gentle final spin –
residual moisture in the washing increased slightly.
ʑChildlock
s
on the display panel
Secure the washing machine to prevent the set functions from being
unintentionally changed.
ON/OFF Start: After the programme starts/ends press /Pause
for approx. 5 seconds.
Note: Childproof lock may remain activated until the next programme
starts, even after the machine has been switched off!
Then deactivate the childproof lock before the programme starts and,
if required, re-activate after the programme starts.
ʑStart/Pause
For starting or interrupting the wash cycle and to continue the programme and to activate/
deactivate the childproof lock.
3
Switching off
Set programme selector to .ÃOff
Turn off tap
Not required for Aqua-Stop models.
aNotes, Installation instructions, Page 7
Remove the washing
Open washing machine door and remove washing.
If - - - - (Rinse hold = without final spin) active:
Set programme selector to or select Spin/Empty l
spin speed.
Press /Pause button.Start
Remove any foreign objects – risk of rusting.
Leave detergent drawer and door open so that
residual water can evaporate.
Congratulations – You have opted for a modern, high-quality
domestic appliance manufactured by Siemens. The washing machine
is distinguished by its economical consumption of water and energy.
Each appliance which leaves our factory is inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information on our products, accessories, spare parts and
services can be found at: or contact our www.siemens-home.com
customer service centres.
Environmental disposal
Dispose of packaging in an environmentally friendly manner.
This appliance has been identified in accordance with the European
Directive 2002/96/EG on Waste Electrical and Electronic Equipment
(WEEE).
The Directive specifies the framework for an EU-wide valid return and
recycling of waste appliances.
Dispenser II: Detergent for main wash,
water softener, bleach, stain remover
Programmes
Detailled overview of programmes aPage 7
Temperature and spin speed can be selected individually
irrespective of the selected programme and programme
progress.
ÊCottons Hard-wearing textiles
o+ Prewash Hardwearing textiles, Prewash at 30°C
ºIntensive Energy saving programme for hard-
wearing textiles
ÏEasy-Care Easy-care textiles
o+ Prewash Easy-care textiles, Prewash at 30°C
ÍMix Different types of washing
5Delicate/Silk Delicate, washable textiles
ÿ ÉüWool Hand or machine-washable wool or
rich-wool textiles
mRinse Extra rinse with spin
Spin/Empty lExtra spin with selectable spin speed or
the rinsing water is drained after - - - -c
(Rinse stop = without final spin) setting;
set (spin speed) to - - - -
6Super 15’ Short programme
Super 30’ Short programme
¬Sensitive Hardwearing textiles; for especially
sensitive skin, extended wash cycle
at higher water level, additional rinse
cycle
gShirts/Business Non-iron shirts
ÎEasy Care Plus Dark textiles
Selecting Start/Pause
If the function buttons are pressed
for longer time, the selected
display values will run auto-
matically!
** If the symbol flashes on the s
display panel, childproof lock
active. Deactivate, aPage 5
Functions and option buttons a
Individual settings, Page 5
Door handle
7
9202 / 9000734304
9000734304 WM12P260GC
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München/Deutschland
Overview of programmes a Observe table of consumption values on Page 8 and instructions on Page 9!
*reduced load for optionspeedPerfect i
Programmes without prewash – pour detergent into dispenser , programmes with prewash – divide detergent between dispensers and .II I II
Programmes °C max. Type of washing Options; information
ÊCottons ¥Ê - 90 C°
8 kg/
4 kg *
Hard-wearing textiles, heat-resistant textiles made
of cotton or linen
speedPerfect ecoPerfect Easy Iron i*, ¢, Î
o+ Prewash
ºIntensive
¥Ê60 °C
¬Sensitive
speedPerfect ecoPerfect Easy Iron i*, ¢, Î;
for especially sensitive skin, extended wash cycle at selected
temperature, higher water level, additional rinse cycle
ÏEasy-Care ¥Ê – 60 °C
3.5 kg
Easy-care textiles made of cotton, linen, synthetic fibres
or blended fabrics speedPerfect ecoPerfect Easy Iron i , ¢, Î
o+ Prewash
ÍMix ¥Ê – 40 °C Textiles made of cotton or easy-care textiles speedPerfect ecoPerfect Easy Iron i , ¢, Î;
different types of washing can be washed together
ÎEasy Care Plus ¥Ê40 °C Dark textiles made of cotton and dark easy-care textiles speedPerfect ecoPerfect Easy Iron i , ¢, Î;
reduced rinse and final spin cycle
gShirts/Business ¥Ê40 °C
2 kg
Non-iron shirts made of cotton, linen, synthetics fibres
or blended fabrics
speedPerfect ecoPerfect Easy Iron i , ¢, Î;
Easy Iron: short spin only, hang up dripping wet
5Delicate/Silk ¥Ê 40 °C For delicate, washable textiles, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains) speedPerfect ecoPerfect Easy Iron i , ¢, Î
ÿ ÉWool ¥Ê40 °C Hand or machine-washable wool or rich-wool textiles especially gentle wash programme to prevent shrinkage, longer
programme pauses (textiles rest in wash liquor).
6Super 15‘ ¥Ê40 °C Easy-care textiles made of cotton, linen, synthetic fibres
or blended fabrics short programme, suited for slightly soiled laundry
Super 30‘
Additional programmes Rinse, Spin/Empty ml
8
Safety instructions
– Read and follow the operating and installation instructions and all other information
enclosed with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock – Never pull out the mains plug by tugging the power cord!
– Insert/pull out the mains plug with dry hands only.
Danger to life On redundant appliances:
– Pull out the mains plug!
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing-machine door. This will prevent
children from locking themselves in and suffocating.
Risk of suffocation – Keep packaging, plastic film and packaging parts out of the reach
of children.
Risk of poisioning – Keep detergents and care products out of the reach of children.
Risk of explosion – Caused by detergents containing solvents, e.g. stain remover/
items of washing pretreated with solvent naphtha may result in an
explosion after being loaded into the washing machine.
Before hand thoroughly rinse items of washing by hand.
Risk of injury – Washing machine door may become very hot.
– Caution when draining hot detergent solution.
– Do not climb on the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum in case it is still rotating.
Consumption values
Programme Load Current Water Programme duration*** *** ***
ÊCottons 30 °C * 8 kg 0.57 kWh 80 l 2:40 h
ÊCottons 40 °C * 8 kg 1.08 kWh 80 l 2:40 h
ÊCottons 60 °C * 8 kg 1.53 kWh 80 l 2:40 h
ÊCottons 90 °C 8 kg 2.52 kWh 96 l 2:30 h
ÏEasy-Care 40 °C * 3.5 kg 0.59 kWh 47 l 1:23 h
ÍMix 40 °C 3.5 kg 0.52 kWh 44 l 1:05 h
5Delicate/Silk 30 °C 2 kg 0.16 kWh 33 l 0:43 h
ÿ ÉWool 30 °C 2 kg 0.17 kWh 40 l 0:40 h
* Programme setting for test according to currently valid European standard 60456.
Information about comparability tests: To test the test programmes, wash indicated load size
at maximum spin speed.
Programme Load Annual energy consumption Annual water consumption
ºIntensive 40/60 °C ** 8 kg/4 kg 204 kWh 12500 l
** Programme settings for testing and energy labelling according to directive 2010/30/EU with
cold water (15 °C).
*** The values may deviate from the stated values depending on water pressure and hardness,
room temperature, type and amount of laundry, detergents used, fluctuations in the mains
voltage and selected options.
8
9
Important informations
Before using your washing machine for the first time
Do not put any washing in the washing machine! Turn the tap on.
Pour into dispenser :II
– approx. 1 litre of water
– Detergent (dosage according to manufacturer’s instructions for light soiling and according
to degree of water hardness).
Set programme selector to and select /Pause. ÊCottons 90 °C Start
At the end of the programme set the programme selector to .ÃOff
Protecting the washing and the machine
– When dosing all detergents, cleaning aids and cleaning agents, always follow the
manufacturer's instructions.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, curtains, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
Insert laundry
Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.
Washing with different degrees of soiling
Wash new items separately.
Light Do not prewash. If required, select option.speedPerfect i
If required, pretreat stains.If required, select the ºIntensive programme.
Heavy Load less washing. Select programme with Prewash.
Soaking Load washing of the same colour.
Pour soaking agent/detergent into dispenser II according to the manufacturer’s instructions.
Set programme selector to and select /Pause. After approx. ÊCottons 30 °C Start
10 minutes press Start/ to stop the programme. After the required soaking time Pause
re-press /Pause, if the programme is to be continued or change the programme.Start
Starching Washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch into the fabric softener
dispenser according to manufacturer’s specifications (if required clean beforehand).~
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel! Observe specifications
of the dye manufacturer! Do discolour washing in the washing machine!not
10
Insert for liquid detergent depending on model
Position insert for dosing liquid detergent:
– Completely remove detergent drawer. aPage 10
– Push insert forwards.
Do not use insert (push upwards):
– For gel-like detergents and washing powders.
– for programmes with Prewash or (Ready in) function.
Care/Cleaning
ʑMachine housing, control panel
– Remove detergent residue immediately.
– Wipe with a soft, damp cloth.
– Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener residue.
1. Pull out, depress insert, take out drawer all the way.
2. Take out insert: using your finger, press insert upwards.
3. Clean detergent dispenser and insert with water and a brush and dry.
4. Attach insert and lock into position (push cylinder onto guide pin).
5. Insert detergent drawer.
Leave detergent drawer open so that residual water can evaporate.
ʑDrum
Leave washing machine door open so that the drum can dry out.
Rust stains – use chlorine-free cleaning agent, not steel wool.
ʑDescaling No washing in the machine!
Not required if detergent dosed correctly. However, if this does occur, follow the instructions
of the descaling agent manufacturer. Suitable descalers can be purchased on our website
or from customer service. aPage 13
Information on the display panel depending on model
§ ³Å: Turn on tap (cold water) fully.
Supply hose kinked/jammed, water pressure too low.
aPage 11: Maintenance, Clean filter
§ ³µ: Drain pump blocked. Maintenance, Cleaning the drain pump aPage 11:
Drainage hose/outlet pipe blocked. Maintenance, Cleaning the aPage 11:
drainage hose on the siphon
§ ´: Water in the base pan, appliance leaking. Turn off the tap. Call customer service!
sActivate/Deactivate childproof lock, aPage 5
Other
displays
Switch off appliance, wait 5 seconds and switch on again. If the display is indicated
again, call customer service.
a
Page 13
Pull out the mains plug!Risk of electric shock!
No solvents!Risk of explosion!
11
Risk of scalding!
Allow detergent solution to cool down!
Turn off the tap!
Maintenance
Drain pump blocked
Set programme selector to , pull out the mains plug.ÃOff
1. Open service flap.
2. Take the drainage hose out of the holder.
3. Remove sealing cap, allow detergent solution to flow out. Have a suitable
container ready.
Push up the closing cap and place the drain hose back in its holder.
4. Carefully unscrew the pump cover (Caution! residual water).
Clean the interior, pump cover thread and pump housing (fan impeller
in the detergent-solution pump must rotate).
5. Reinsert and screw on pump cover. Handle should be vertical.
6. Close the service flap.
To prevent unused detergent from flowing into the outlet during the next
wash: Pour 1 litre of water into dispenser II and start the Spin/Empty l
programme.
Drainage hose on the siphon blocked
Set programme selector to , pull out the mains plug.ÃOff
1. Loosen hose clip, carefully remove drainage hose (Caution! residual
water).
2. Clean drainage hose and siphon spigot.
3. Re-attach drainage hose and secure connection point with hose clip.
Filter blocked in water inlet hose
Risk of electric shock!
Do not immerse Aqua-Stop safety device in water (contains electric valve).
Release water pressure in the supply hose:
1. Turn off the tap!
2. Select any programme (except mRinse// ).Spin/Empty l
3. StartPress /Pause button. Leave programme for approx. 40 seconds.
4. OffSet programme selector to Ã. Pull out the mains plug.
Clean the filter:
5. Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6. Connect the hose and check for leaks.
12
What to do if …
ʑ
Water is running out. Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
ʑWater not flowing in.
Detergent not washed in.
/Pause not selected?Start
– Tap not open?
– Filter blocked? Cleaning the filter aPage 11
– Supply hose kinked or jammed?
ʑWashing-machine door
cannot be opened.
– Safety function active. Stop programme? aPage 4
– - - - - (Rinse stop = without final spin) selected? aPage 3, 4
– Can be opened via emergency release only? aPage 13
ʑProgramme does not
start.
/Pause or (Ready in) time selected?Start
– Door closed?
– Childlock active? Deactivate aPage 5
ʑDetergent solution is not
drained.
– - - - - (Rinse stop = without final spin) selected? aPage 3, 4
– Clean detergent-solution pump. a Page 11
– Clean outlet pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault – water below the visible area.
ʑSpin result not
satisfactory, washing
wet/too damp.
– Not a fault – unbalanced load detection system has stopped
the spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
selected? Easy Iron ÎaPage 5
– Too low speed selected? aPage 5
ʑThe programme duration
changes during the wash
cycle.
– Not a fault – the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑSpin cycle actuated
several times.
– Not a fault – unbalanced load detection system adjusts
imbalance.
ʑResidual water in the
dispenser for care
product 0.
– Not a fault – effect of the care product not impaired.
– If required, clean insert. aPage 10
ʑOdour formation in the
washing machine.
– Run programme without washing. ÊCottons 90 °C
Use standard detergent.
ʑFoam comes out of the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into dispenser II.
(Not for outdoor, sports and down-filled textiles!)
– Reduce detergent dosage for the next wash cycle.
ʑLoud noise formation,
vibrations and “Wander-
ing” during spin cycle.
– Appliance feet fixed?
Secure appliance feet. aInstallation Instructions
– Transportation protection devices removed?
Remove transportation protection devices.
aInstallation Instructions
ʑDisplay panel/indicator
lights do not function
while the appliance is
running.
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
ʑThe programme takes
longer than usual.
– Not a fault – unbalanced load detection system adjusts
imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – a rinse cycle
is switched on.
13
What to do if …
ʑ
Detergent residue on the
washing.
– Occasionally phosphate-free detergents contain water-insoluble
residue.
– Select or brush the laundry after washing.mRinse
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Set programme selector to and pull out the mains plug.ÃOff
– Turn off the tap and call customer service. aInstallation instructions
Emergency release e.g. if power failure occurs
The programme continues running when the power supply is restored. If the washing is still
to be removed, the door can be opened as described below:
Risk of scalding!
Wash liquor and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. OffSet programme selector to Ã, pull out the mains plug.
2. Drain detergent solution. aPage 10
3. Take the emergency release out of the holder.
Pull down emergency release with a tool and release.
Door can then be opened.
Customer service
ʑIf you cannot rectify the fault yourself (What to do if ... , aPage 12, 13), please contact
our customer service. We will always finds a suitable solution to avoid unnecessary visits
by technicians.
ʑYou can find the contact data for your nearest customer service here or in the customer
service list (depending on model).
– GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.
01450 2655IE
ʑPlease give customer service the product number (E-Nr.) and the production number (FD)
of the appliance.
Product number Production number
These instructions can be found on: inside
of washing machine door */open service
flap * and rear of the appliance.
* depending on model
ʑRely on the competence of the manufacturer. Contact us.
You can therefore be sure that the repair is carried out by trained service technicians
who carry original spare parts.
Operating instructions
Washing
machine
Follow the safety
instructions on
Page 8!
Do not switch on the washing machine until you have
read these instructions and the separate Installation/
Maintenance instructions!
en
Your washing machine Intended use
Preparation
ʑ


Product specificaties

Merk: Siemens
Categorie: Wasmachine
Model: WM12P260GC
Apparaatplaatsing: Vrijstaand
Soort bediening: Buttons, Rotary
Kleur van het product: Wit
Deurscharnieren: Links
Ingebouwd display: Ja
Timer: Ja
Gewicht: 75000 g
Breedte: 600 mm
Diepte: 590 mm
Hoogte: 850 mm
Netbelasting: 2300 W
Type lader: Voorbelading
Deurkleur: Zilver
Materiaal trommel: Roestvrijstaal
Snoerlengte: 1.75 m
Trommelinhoud: 65 l
Uitgestelde start timer: Ja
Startvertraging: 24 uur
Resterende tijd indicatie: Ja
Kinderslot: Ja
Gewicht verpakking: 76000 g
Energieverbruik wassen: - kWu
Waterconsumptie per cyclus: - l
Centrifuge-droger klasse: B
Geluidsniveau (wassen): 54 dB
Sopschuimbewaking: Ja
Onbalanscontrolesysteem: Ja
Aanpasbare centrifugesnelheid: Ja
Maximale centrifugesnelheid: 1200 RPM
Stroom: 13 A
Geluidsniveau bij centrifugeren: 75 dB
Verstelbare voeten: Ja
Diepte wanneer de deur open is: 990 mm
Kuip materiaal: Kunststof
Voetenverstelling: 12 mm
AquaStop-functie: Ja
Certificering: CE, VDE
Minimum centrifugesnelheid: 400 RPM
Spoelen Plus functie: Ja
Deur openingshoek: 165 °
Nominale capaciteit: 8 kg
AC-ingangsspanning: 220 - 240 V
AC-ingangsfrequentie: 50 Hz
Type beeldscherm: LED
Wasprogramma's: Hygiene/anti-allergy, Black, Blouse/shirt, Eco, Hand/wool, Mix, Quick, Delicate/silk

Heb je hulp nodig?

Als je hulp nodig hebt met Siemens WM12P260GC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Siemens

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

LG

LG WT17BPBK Handleiding

22 November 2024
Bosch

Bosch WAX32M10 Handleiding

22 November 2024
LG

LG F2WV308NEW3 Handleiding

22 November 2024
Bosch

Bosch WAU28S70 Handleiding

22 November 2024
Bosch

Bosch WGA142X2TR Handleiding

22 November 2024
LG

LG WF-79X3 Handleiding

22 November 2024
Edesa

Edesa EWF-7400 X Handleiding

22 November 2024
Smeg

Smeg WN04SEA Handleiding

21 November 2024
Smeg

Smeg WHT814ASIT Handleiding

21 November 2024