Siemens WM10Q37XEE Handleiding

Siemens Wasmachine WM10Q37XEE

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM10Q37XEE (6 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Safety instructions

 The washing machine is heavy - take care when lifting.

 Caution: frozen hoses may rip/burst. Do not install the washing machine in areas exposed

to frost or outdoors.

 The washing machine could be damaged. Do not lift the appliance by protruding

components (e.g. the washing machine door, the cover, the front panel or the outer door

in case of deco models).

 In addition to the instructions provided in this document, special regulations from the

relevant water and electric utility companies may apply.

 If in doubt, have a technician connect the appliance.

 Lay hoses and cables in such a way that there is no risk of tripping.

Installation surface

 The machine must be stable so that it does not move around.

 The installation surface must be firm and level.

 Soft floors/floor coverings are not suitable.

Installation on a pedestal

 The feet of the washing machine be secured with holding brackets*.must

* order no. WMZ2200, WX9756, CZ110600, Z7080X0

Installation on a wood joist floor

 If possible, place the washing machine in a corner.

 Screw a water-resistant wooden board (min. 30 mm thick) to the floor.

 The feet of the washing machine be secured with holding brackets*.must

* order no. see above

Installation on a platform with drawer*

 * order no. WMZ20490, WZ20490

Installing the appliance

Install the appliance before connecting it to the power supply.

Installation in a kitchenette (underneath the worktop or fitted in a cabinet)

 Recess width of 60 cm required.

 Only install the washing machine underneath a continuous worktop that is securely

connected to adjacent cabinets.

Installation underneath the worktop

Risk of electric shock!

Instead of the appliance covering plate, you have a metal cover*must .

* order no. WMZ20331, WZ20331

 Recess width of 60 cm required.

Scope of delivery depending on model

Also required, depending on the connection:

 1 hose clamp Ø 24-40 mm (exclusive dealers) to connect to a siphon

apage 4; water connection.

Useful tools

 Spirit level for installation.

 Wrenches

WAF 13: for loosening transport braces and apage 3

WAF 17: for aligning appliance feet .apage 5

Hose and cable lengths depending on model

Left-hand connection or Right-hand connection

Available from specialist dealers/the after-sales service:

 Extension for Aqua-Stop or cold-water inlet hose (approx. 2.50 m),

order no. WMZ2380, WZ10130, CZ11350, Z7070X0

 Longer inlet hose (approx. 2.20 m) for standard model.

Mains cable

Water outlet

Water inlet

Elbow

for fixing the drainage

hose in place

Covers

Aqua Stop Hot wateräAqua Secure & ä

Standard

Adapter 1/2-3/4

(depending on model)

~145 cm

~100 cm

~135 cm

~145 cm

min. 60 cm

max. 100 cm

~90 cm

Moisture inside the drum

is due to final testing.

Removing the transport braces

 Before using the appliance for the first time, make sure that you

completely remove transport braces and keep them for

subsequent transportation.

 If you need to transport the appliance at a later date, always re-affix

the transport braces to prevent damage to the machine. apage 6.

 Store the screw and sleeve together.

1. Take the hoses out of the holders.

2. Remove all 4 screws completely.

3. Remove all 4 transport braces completely and take the mains cable

out of the holders .(depending on model)

4. Affix the covers.

Water connection depending on model

 Do not immerse the Aqua-Stop safety device in water Risk of electric shock.

(contains an electric valve).

 To prevent leaks or water damage, observe the instructions in this section.

 : only operate the washing machine using cold drinking water (in case of models Caution

featured for hot water: maximum temperature 60 ºC).

 Do not connect to the mixer tap of an unpressurised hot-water boiler.

 Do not use a used inlet hose. Only use the inlet hose supplied or one which was

purchased from an authorised specialist dealer.

 If in doubt, have a technician connect the appliance.

Water connection depending on model

QWater inlet

Caution: do not bend, squash, modify or cut through

(otherwise its strength is no longer guaranteed).

Optimum water pressure in the supply network: 200 1,000 kPa (2 10 bar)ä ä

 When the tap is on, the water flow is at least 10 l/min

(1-2 bar: 6 l/min; with 1 bar consumption parameters cannot be assure).

 If the water pressure is higher than this, a pressure reducing valve must be installed

Connection to the tap:

Aqua-Stop, Aqua-Secure, Standard: Connection to the

machine:

Aqua Stop, Aqua-Secure Standardä

no necessary with Aqua-

Stop, fixed installation;

Aqua-Secure, Standard

1. Connect the water inlet hose (hoses) to the tap (taps) 3/4" = 26,4 mm and to the solenoid

valves.

Caution: only tighten the screw connections by hand.

2. Open the water tap (taps) carefully, checking the leak tightness of the connection points.

Caution: the screw connection is under mains water pressure.

Connection in case of hot water

models:

COLD  Cold water

HOT  Hot water max. 60 °C (red)

If no hot water connection is present:

 only connect the cold water inlet hose

and

 cover the hot water connection on the

appliance so that it is kept free of dirt.

QWater outlet

Caution: do not bend or pull lengthways.

Height difference between the installation surface and the

drain:

min. 60 cm - max. 100 cm

Outlet in a sink:

Caution: secure the drain hose from slipping out.

Caution: the plug must not block drainage from the sink. During

pumping, check whether the water is draining away quickly

enough. The end of the drain hose must not be immersed in the

water pumped out. This risks water being sucked back into the

washing machine.

Drainage into a siphon:

Caution: the connection point must be secured with a hose

clamp, Ø 24-40 mm (exclusive dealers).

max.

90°

max.

90°

Manufacturer > Operating instructions

Alignment

Intense noise formation, vibrations and wandering may be the result of incorrect

alignment.

Aligning the washing machine with a spirit level

1. Loosen the lock nut using a wrench, by turning it in a clockwise direction.

2. Change the height by turning the appliance feet.

Caution: all four appliance feet must be firmly on the ground.

The washing machine must not wobble.

Check the alignment of the washing machine with a spirit level and adjust

if necessary.

3. Tighten the lock nut against the housing.

In doing so, hold the foot tight and do not adjust its height.

Caution: the lock nuts on all four appliance feet must be screwed tightly

against the housing.

Electrical connection

ʑThe washing machine must only be connected to an alternating current via a

properly installed earthed socket.

ʑThe power supply and voltage indicated on the washing machine (rating plate)

must be the same.

ʑThe connected load and fuse required are specified on the rating plate.

ʑMake sure that:

 the mains plug fits the socket,

 the cable cross-section is adequate,

 the earthing system is properly installed.

ʑ(If this is necessary), the mains cable may only be replaced by a qualified

electrician.

Replacement mains cables are available from the after-sales service.

ʑDo not use multiple plugs/couplings or extension cables.

ʑIf a residual current circuit breaker is used, only use a type which displays this

symbol: .

Only this symbol guarantees compliance with the currently applicable regulations.

ʑDo not plug in or unplug the mains plug with wet hands.

Pull the appliance plug out of the socket at the plug only, not by the cable.

max. 10 mm

9301 / 9000502633

9000502633

Transportation, e.g. when moving home

Before transporting the washing machine:

1. Turn off the tap.

2. Drain residual water Maintenance - drain pump.aOperating instructions;

3. Release the water pressure in the inlet hose aOperating instructions; Maintenance - filter

in water inlet.

4. Disconnect the washing machine from the power supply.

5. Dismantle the hoses.

Preparing and installing transport braces:

Remove all covers and store them.

Affix all transport braces. In doing so, turn the

bend on the hose holders inwards. Clamp the

mains cable in the holders. Tighten the screws.

After transportation, the transport braces be removed. page 3must a .

To prevent unused detergent from flowing straight into the drain during the next wash: Pour

2 litres of water into compartment II and start the programme.Empty

Technical specifications

ʑDimensions (width x depth x height) 60 x 55 x 85 cm

ʑWeight 66  73 kg depending on model

ʑMains connection Nominal voltage 220-240 V, 50 Hz

Nominal current 10 A

Nominal power 2,300 W

ʑWater pressure 200-1000 kPa (2-10 bar)

After-sales service

ʑIf you cannot rectify the fault yourself ( What to do if... ), Operating instructions; apage 11

please contact our after-sales service. We will always find a suitable solution and will avoid a

visit from a service technician wherever possible.

ʑThe contact details for all countries can be found in the enclosed after-sales service directory.

ʑPlease give the after-sales service the product number (E-Nr.) and the production number

(FD) of the appliance.

Product number Production number

You will find this information on the inside of the

washing machine door, on the opened service

flap or at the rear of the appliance (depending

on the model).

ʑRely on the professionalism of the manufacturer. Please contact us.

This will ensure that the repair is carried out by trained service technicians who arrive

equipped with genuine spare parts for your appliance.

Aqua-Stop warranty only for appliances with Aqua-Stop

In addition to warranty claims against the vendor from the purchase agreement and to our

appliance warranty, we will pay damages under the following conditions:

1. If a fault in our Aqua-Stop system causes water damage, we will reimburse damages caused

to private customers.

2. The liability guarantee is valid for the service life of the appliance.

3. It is a prerequisite of all warranty claims that the appliance with Aqua-Stop must have been

set up and connected correctly in accordance with our instructions; this also includes a

correctly fitted Aqua-Stop extension (original accessories).

Our warranty goes not cover defective power cables or fittings between the Aqua-Stop

connection and the tap.

4. Appliances with Aqua-Stop do not need to be supervised during operation, nor secured

afterwards by turning off the tap.

The tap only needs to be turned off if you are away from home for a long period, e.g. for

several weeks' holiday.

Washing machine

Contents Page

ʋSafety instructions . . . . . . . . . . . . . . . . . . . . . . . . . 1

ʋInstallation surface. . . . . . . . . . . . . . . . . . . . . . . . . 1

ʋInstalling the appliance . . . . . . . . . . . . . . . . . . . . . 1

ʋScope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . 2

ʋHose and cable lengths . . . . . . . . . . . . . . . . . . . . 2

ʋRemoving the transport braces . . . . . . . . . . . . . . . 3

ʋWater connection . . . . . . . . . . . . . . . . . . . . . . . .3/4

ʋAlignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ʋElectrical connection . . . . . . . . . . . . . . . . . . . . . . . 5

ʋTransportation, e.g. when moving home . . . . . . . . 6

ʋTechnical specifications. . . . . . . . . . . . . . . . . . . . . 6

ʋAfter-sales service . . . . . . . . . . . . . . . . . . . . . . . . . 7

ʋAqua-Stop warranty . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation

instructions

Read these instructions before switching on the washing machine.

Also observe the separate Instruction manual.

Keep all documents for use in the future or for the subsequent owner.

Safety instructions

 The washing machine is heavy - take care when lifting.

 Caution: frozen hoses may rip/burst. Do not install the washing machine in areas exposed

to frost or outdoors.

 The washing machine could be damaged. Do not lift the appliance by protruding

components (e.g. the washing machine door, the cover, the front panel or the outer door

in case of deco models).

 In addition to the instructions provided in this document, special regulations from the

relevant water and electric utility companies may apply.

 If in doubt, have a technician connect the appliance.

 Lay hoses and cables in such a way that there is no risk of tripping.

Installation surface

 The machine must be stable so that it does not move around.

 The installation surface must be firm and level.

 Soft floors/floor coverings are not suitable.

Installation on a pedestal

 The feet of the washing machine be secured with holding brackets*.must

* order no. WMZ2200, WX9756, CZ110600, Z7080X0

Installation on a wood joist floor

 If possible, place the washing machine in a corner.

 Screw a water-resistant wooden board (min. 30 mm thick) to the floor.

 The feet of the washing machine be secured with holding brackets*.must

* order no. see above

Installation on a platform with drawer*

 * order no. WMZ20490, WZ20490

Installing the appliance

Install the appliance before connecting it to the power supply.

Installation in a kitchenette (underneath the worktop or fitted in a cabinet)

 Recess width of 60 cm required.

 Only install the washing machine underneath a continuous worktop that is securely

connected to adjacent cabinets.

Installation underneath the worktop

Risk of electric shock!

Instead of the appliance covering plate, you have a metal cover*must .

* order no. WMZ20331, WZ20331

 Recess width of 60 cm required.

Scope of delivery depending on model

Also required, depending on the connection:

 1 hose clamp Ø 24-40 mm (exclusive dealers) to connect to a siphon

apage 4; water connection.

Useful tools

 Spirit level for installation.

 Wrenches

WAF 13: for loosening transport braces and apage 3

WAF 17: for aligning appliance feet .apage 5

Hose and cable lengths depending on model

Left-hand connection or Right-hand connection

Available from specialist dealers/the after-sales service:

 Extension for Aqua-Stop or cold-water inlet hose (approx. 2.50 m),

order no. WMZ2380, WZ10130, CZ11350, Z7070X0

 Longer inlet hose (approx. 2.20 m) for standard model.

Mains cable

Water outlet

Water inlet

Elbow

for fixing the drainage

hose in place

Covers

Aqua Stop Hot wateräAqua Secure & ä

Standard

Adapter 1/2-3/4

(depending on model)

~145 cm

~100 cm

~135 cm

~145 cm

min. 60 cm

max. 100 cm

~90 cm

Moisture inside the drum

is due to final testing.

Product specificaties

Merk:	Siemens
Categorie:	Wasmachine
Model:	WM10Q37XEE
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons,Rotary
Kleur van het product:	Metallic
Deurscharnieren:	Links
Ingebouwd display:	Ja
Timer:	Ja
Breedte:	600 mm
Diepte:	550 mm
Hoogte:	850 mm
Type lader:	Voorbelading
Snoerlengte:	1.6 m
Trommelinhoud:	58 l
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Resterende tijd indicatie:	Ja
Kinderslot:	Ja
Energie-efficiëntieklasse (oud):	A+++
Stroomvoorziening:	220 - 240V, 50Hz
Energieverbruik wassen:	0.81 kWu
Waterconsumptie per cyclus:	- l
Wasklasse:	A
Jaarlijkse energieverbruik wassen:	174 kWu
Centrifuge-droger klasse:	C
Geluidsniveau (wassen):	54 dB
Sopschuimbewaking:	Ja
Onbalanscontrolesysteem:	Ja
Aanpasbare centrifugesnelheid:	Ja
Maximale centrifugesnelheid:	1000 RPM
Stroom:	10 A
Geluidsniveau bij centrifugeren:	75 dB
Jaarlijks waterverbruik wassen:	8140 l
Restvochtpercentage:	59 procent
Lengte afvoerslang:	1.5 m
Lengte watertoevoerslang:	1.5 m
Nominale capaciteit:	7 kg
Stroomverbruik (typisch):	2300 W
Type beeldscherm:	LCD
Wasprogramma's:	Hygiene/anti-allergy,Black