Siemens WM10E221EP Handleiding

Siemens Wasmachine WM10E221EP

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM10E221EP (16 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

1 2 3 4 5 6

- - - - -

1000*

 (rpm) Select the spin speed (* depending on the

model) or - - - - (no final spin, laundry soaks in

the last rinsing water, display panel - - - -)

ª¥Ê - 90 temp. °C Selecting the temperature

1 - 24h (finished in) Programme end after

#Childproof lock

a page 5

End of programme when ...

... the status indicator centrifugar (spin) flashes and §Ê

appears in the display panel.

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select centrifug. adicional m (rinse)/ 

(spin).

– Select /pausa ( /pause).inicio start

Programmes at lower temperatures:

– (rinse)/mü centrifug. adicional (spin) (deactivate

extra extra rinse)h ( ) or select .lü(empty)

– Select /pausa ( /pause).inicio start

Changing the programme, if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Select /pausa ( /pause). The new programme inicio start

starts from the beginning.

Correct installation according to the

separate Installation instructions.

Checking the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connecting the mains

plug

Make sure your hands are dry.

Take hold of the plug only.

Turning the tap on

Compartment II: Detergent for the main wash, water softener,

bleach, stain remover

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load apage 7.

Observe the important information page 6.a

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Measure accordingly:

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

Pour liquid detergent into the appropriate dispenser and place in the drum.

Your washing machine

Congratulations ä You have opted for a modern, high-quality

domestic appliance manufactured by Siemens. The washing

machine is distinguished by its economical water and energy

consumption.

Each machine that leaves our factory has been inspected thoroughly

to ensure that it functions properly and is in perfect condition.

Further information: www.siemens-home.com

You can find the contact details for your nearest after-sales service

here or in the after-sales service directory (depending on model).

GB 0844 8928999

Calls from a BT landline will be charged at up to 3 pence per

minute. A call set-up fee of up to 6 pence may apply.

IE 01450 2655

Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with environmental

guidelines.

This appliance is certified in accordance with European Directive

2002/96/EC on waste electrical and electronic equipment (WEEE).

This directive provides the framework for the EU-wide collection and

reuse of used appliances.

Intended use

Contents Page

ʋIntended use .......................................................................................1

ʋProgrammes .......................................................................................1

ʋSetting and adjusting the programme ...........................................3

ʋWashing ...........................................................................................3/4

ʋAfter washing ......................................................................................4

ʋIndividual settings ..............................................................................5

ʋImportant information ....................................................................... 6

ʋOverview of programmes ................................................................7

ʋSafety instructions .............................................................................8

ʋConsumption values .........................................................................8

ʋCare .....................................................................................................9

ʋInformation on the display panel ....................................................9

ʋMaintenance .................................................................................... 10

ʋWhat to do if... .................................................................................. 11

Environmental protection/Conservation tips

– Always fill the washing machine with a maximum amount of

laundry for the relevant programme.

– Wash normally soiled laundry without a pre-wash.

– Instead of resistentes algod. (cottons) 90 °C, choose the

programme resistentes algod. (cottons) ecoPerfect 60 °Cj.

Comparable cleaning result with significantly lower energy

consumption.

– Measure the detergent according to the manufacturer's

instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the spin

speed according to the instructions of the dryer manufacturer.

Preparation Before washing for the first time

Wash once without any laundry page 9.a

Setting** and adjusting programmes

Display panel/

option buttons

Programme selector Start/

Pause

Programme selector for

switching the machine

on and off and for

selecting the

programme. Can be

turned in either

direction.

Programmes

Detailed overview of programmes .apage 7

Temperature and spin speed can be selected individually,

depending on the selected programme and programme

progress.

resistentes algod.

(cottons)

Hard-wearing fabrics

i speedPerfect

j ecoPerfect

+ prelav. (+ prewash)

S menos (anti-crease)

sintéticos (easy-care)

Easy-care fabrics

i speedPerfect

j ecoPerfect

+ prelav. (+ prewash)

mix Different types of laundry

delicado/seda

(delicate/silk)

Delicate washable fabrics

lana/lã (wool) ÿü Hand/machine-washable wool

express 15 min. Short programme

m (rinse)/ centrifug. 

adicional (spin)

Hand-wash laundry, extra h (extra

rinse) activated; if only using the

spin cycle, deactivate the button

l (empty) Drain rinsing water for - - - -

**If the symbol flashes in the #

display panel, the childproof lock

is active deactivate, .a page 5

Additional function and options

buttons a Individual settings,

page 5.

Select inicio/pausa

(start/pause)

Washing

Removing the washing

Open the washing machine door and remove the washing.

If - - - - (without final spin) is active: Turn the programme

selector to or select the spin speed. lü(empty)

Select /pausa ( /pause).inicio start

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent

drawer open so that any residual water can

evaporate.

Turning the tap off

Not required for AquaStop models a Refer to installation

instructions

Switching off

Turn the programme selector to .(off)

Washing

Detergent drawer with

compartments , , III~

Washing machine

door

Compartment ~: Fabric softener, starch

Compartment I: Detergent for pre-wash

ʋfor domestic use only,

ʋfor machine-washable fabrics and hand-washable wool

in detergent solution,

ʋto be operated with cold drinking water and commer-

cially available detergents and care products which are

suitable for use in washing machines.

– Do not leave children unattended near the

washing machine.

– The washing machine is not to be used by

children or persons not familiar with the

operating instructions.

– Keep pets away from the washing machine.

Dilute thick fabric softener and fabric conditioner with water.

This prevents blockages.

Individual settings

ʑOption buttons

The spin speed and temperature can be changed before and during the selected programme

runs. The effects depend on the programme progress.

ʑc (Spin speed / without final spin)

You can change the displayed spin speed. The maximum selectable spin speed depends on

the model and on which programme is currently selected.

ʑ°C (Temperature)

You can change the displayed washing temperature. The maximum washing temperature

that can be selected depends on the programme that has been set.

ʑ (Finished in)

When you select the programme, the relevant programme duration is displayed. You can

delay the start of the programme before it begins. The "finished in" time can be set in

increments of one hour up to a maximum of 24 hours. Press the button  (finished in)

repeatedly until the required number of hours is displayed (h = hour). Select /pausa inicio

( /pause). start

ʑAdditional function aand overview of programmes, see page 7

extra h (extra rinse) Additional rinse cycle. For areas with very soft water or for further

enhancing the washing result.

ʑChildproof lock

#

Childproof lock/

Appliance lock

You can lock the washing machine to prevent the functions you have

set from being changed inadvertently.

ON/OFF: Press and hold the inicio/pausa (start/pause) button for

approx. 5 seconds after the start/end of the programme.

Note: The childproof lock can remain activated until you wish to start

the next programme, even after switching off the machine.

Then you can deactivate the childproof lock before the start of the

programme and activate it again as necessary once the programme

has started.

ʑinicio/pausa (start/pause)

For starting or interrupting the programme.

Important information

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you

must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light Do not pre-wash. If required, choose the ispeedPerfect

programme.

Pre-treat any stains as necessary.

heavy Do not load as much laundry. Select the program with prewash.

Soaking Load laundry of the same colour

Pour soaking agent/detergent into compartment in accordance with the manufacturer's II

instructions. Turn the programme selector to and select resistentes algod. (cottons) 30 °C

inicio start pausa pause/pausa ( /pause). After approx. 10 minutes, press inicio/ (start/ ) to

pause the programme. Once the required soaking time has elapsed, select /pausa inicio

( /pause) again to continue the programme, or select a different programme.start

Starching Laundry must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first

if necessary).

Dyeing / Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions! Do use the washing machine for not

bleaching clothes!

Addi-

tional

function

Drum

Control panel

Service flap

Status

indi-

cators

If the buttons are held for longer,

the appliance automatically runs

through the setting options.

activo

aclar./enx.

centrifugar

wash

rinse

spin

Overview of programmes aRefer to the table of consumption values on page 8 and notes on page 6.

Programmes °C max. Type of laundry Additional functions; information

resistentes algod.

(cottons) ª¥Ê - 90 °C

7 kg/

4 kg*

Hard-wearing fabrics, heat-resistant fabrics made of

cotton or linen

extra (extra rinse)h

ispeedPerfect* - 90 °C extra (extra rinse); shorter programmeª¥Ê h

jecoPerfect - 90 °C extra (extra rinse); energy-saving programmeª¥Ê h

+ prelav. (+ prewash) - 90 °C extra (extra rinse); prewash at 30 °Cª¥Ê h

Smenos (anti-crease) - 90 °Cª¥Ê extra (extra rinse); special spin sequence with subsequent h

fluffing.

sintéticos (easy-care) ª¥Ê - 60 °C

3 kg

Easy-care fabrics made of cotton, linen, synthetic

fibres or blended fabrics

extra (extra rinse)h

ispeedPerfect - 60 °C extra (extra rinse); shorter programmeª¥Ê h

jecoPerfect - 60 °C extra (extra rinse); energy-saving programmeª¥Ê h

+ prelav. (+ prewash) - 60 °C extra (extra rinse); prewash at 30 °Cª¥Ê h

mix ª¥Ê - 40 °C Fabrics made of cotton or easy-care fabrics extra (extra rinse);h

different types of laundry can be washed together

delicado/seda

(delicate/silk) ª¥Ê - 40 °C

2 kg

For delicate, washable fabrics, e.g. made of silk,

satin, synthetic fibres or blended fabrics (e.g. cur-

tains)

extra (extra rinse);h

no spin between rinse cycles

lana/lã (wool) ª¥Ê - 40 °C Hand or machine-washable fabrics made of wool or ä

containing wool

Particularly gentle wash programme to prevent shrinkage of laun-

dry. Longer programme breaks (fabrics rest in the detergent solu-

tion)

express 15 min. ª¥Ê - 40 °C Easy-care fabrics made of cotton, linen, synthetic

fibres or blended fabrics

Short programme, approx. 15 minutes,

suitable for lightly soiled laundry

Additional programmes (rinse)/mü centrifug. adicional (spin), (empty)lü

*reduced load

As a with the maximum spin speed is ideal.short programme, mix 40 °C,

Programmes without pre-wash - add detergent to compartment , programmes with pre-wash - distribute the detergent between compartments and .II I II

0411 / 9000659630

*659630* WM10E221EP...

Siemens-Electrogeräte GmbH

Carl-Wery-Str. 34

81739 München / Germany

Safety instructions

– Read the instruction manual and installation instructions and all other information enclosed

with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull the cable to disconnect the mains plug.

– Never insert/disconnect the mains plug with damp hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent

children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of

children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing

solvents, e.g. stain remover/cleaning solvent may cause an

explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine

is in operation.

Consumption values depending on model

Programme Load Electricity Water*** *** Programme

duration***

resistentes algod. (cottons) 30 °C* 7 kg 0,55 kWh 60 l 02:36 h

resistentes algod. (cottons) 40 °C* 7 kg 0,69 kWh 60 l 02:36 h

resistentes algod. (cottons) 60 °C* 7 kg 1,33 kWh 60 l 02:41 h

resistentes algod. (cottons) 90 °C 7 kg 2,00 kWh 64 l 02:48 h

sintéticos (easy-care) 40 °C* 3 kg 0,55 kWh 55 l 01:37 h

mix 40 °C 3 kg 0,48 kWh 32 l 01:03 h

delicado/seda (delicate/silk) 40 °C 2 kg 0,21 kWh 31 l 00:41 h

lana/lá (wool) 30 °C 2 kg 0,19 kWh 39 l 00:40 h

* Programme setting for testing in accordance with valid standard EN60456.

Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.

Programme Load Annual energy

consumption

Annual water

consumption

resistentes algod. (cottons) ecoPerfect 40/60 °C ** 7/3,5 kg 197 kWh 10560 lj

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).

*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-

perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional

functions.

Care

Before washing for the first time

Do not load any laundry into the machine. Turn on the tap.

Add the following to compartment :II

– approx. 1 litre water

– detergent (dosage according to the manufacturer's instructions for light soiling and the

appropriate degree of water hardness)

Set the programme selector to sintéticos (easy-care) 60 °C and select inicio start/pausa ( /

pause). At the end of the programme, turn the programme selector to .(off)

Machine housing, control panel

– Wipe with a soft, damp cloth.

– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).

– Remove detergent and cleaning agent residue immediately.

– Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1. Pull out, press insert down, remove drawer completely.

2. To remove the insert: press the insert upwards from below with your

finger.

3. Clean the detergent dispenser tray and insert with water and a brush and

dry it.

4. Attach the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can

evaporate.

Drum

Leave the washing machine door open so that the drum can dry out.

Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine

Descale the appliance according to the descaler manufacturer's instructions. This should not

be necessary if the correct dosage of detergent is used.

Information on the display panel depending on model

E3 Close the washing machine door properly; laundry may be caught.

E5 Open the tap completely, supply hose kinked or trapped;

Clean the filter a page 10 Water pressure too low, .

E6 Detergent solution pump blocked; Clean the detergent solution pump apage 10.

Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon apage 10.

E2 Motor fault. Call the after-sales service.

–Risk of electric shock.

Disconnect the mains plug.

– No solvents.Risk of explosion.

Maintenance

Detergent solution pump

Turn the programme selector to (off) and disconnect the mains plug.

1. Open and remove the service flap.

2. For models with a drainage hose: Remove the drainage hose from the

retainer and pull it from the housing. Remove the container.

Remove the sealing cap, allow the detergent solution to flow out.

Replace the sealing cap and place the drainage hose in the retainer.

2* For models without a drainage hose: Carefully unscrew the pump cover

until the detergent solution begins to flow out. When the service flap is

half full, close the pump cover and empty the service flap. Repeat the

above steps until all the detergent solution has completely drained out.

3. Carefully unscrew the pump cover (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in

the detergent solution pump must rotate).

5. Replace the pump cover and screw it tightly.

6. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment and start the programme.II lü(empty)

Drainage hose at the siphon

Turn the programme selector to

(off)

and disconnect the mains plug.

1. Loosen the hose clamp, carefully remove the drainage hose

(residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose

clamp.

Filter in the water supply

Risk of electric shock

Do not immerse the AquaStop safety device in water (contains an electric valve).

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except m (rinse) centrifug. adicional (spin) / 

/ (empty)/ lü ).

3. inicioSelect /pausa ( /pause). Let the programme run for start

approximately 40 seconds.

4. Turn the programme selector to (off). Disconnect the mains plug.

Clean the filter:

1. Depending on model:

Disconnect the hose from the tap.

Clean the filter using a small brush.

and/or for Standard and AquaStop models:

Remove the hose on the rear of the appliance,

Remove the filter with pliers and clean.

2. Connect the hose and check for leaks.

– Allow the Risk of scalding.

detergent solution to cool down.

– Turn off the tap.

What to do if ...

ʑWater is leaking out. – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

ʑNo water supply.

Detergent not

dispensed.

– /pausa ( /pause) not selected?inicio start

– Tap not turned on?

– Filter blocked? Clean the filter a page 10.

– Supply hose kinked or trapped?

ʑWashing machine door

cannot be opened.

– Safety function active. Wait approx. 2 minutes.

– - - - - (without final spin) selected? apage 3, 4.

ʑProgramme does not

start.

– /pausa ( /pause) or selected?inicio start  (finished in-time)

– Washing machine door closed?

– Childproof lock active? Deactivate .apage 5

ʑDetergent solution is

not drained.

– - - - - (without final spin) selected? apage 3, 4.

– Clean the detergent solution pump apage 10.

– Clean the waste pipe and/or drainage hose.

ʑWater not visible in the

drum.

– Not a fault - water below the visible area.

ʑUnsatisfactory spin

result.

Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has cancelled

the spin cycle because of uneven distribution of the laundry.

Distribute small and large items of laundry evenly inside the drum.

– Programme selected? Smenos (anti-crease) apage 7.

– Speed selected too low? .apage 5

ʑThe programme

duration changes

during the wash cycle.

– Not a fault – the programme sequence is optimised for the

particular wash process. This may result in changes to the

programme duration in the display field.

ʑSpin cycle performed

several times.

– Not a fault - unbalanced load detection system adjusts the

imbalance.

ʑResidual water in the

compartment for care

products.

– Not a fault - the action of the care product is not affected.

– Clean the insert if necessary .apage 9

ʑOdour formation in the

washing machine.

– Run programme without resistentes algod. (cottons) 90 °C

laundry. Use standard detergent.

ʑactivo (wash) display

lamp flashes. Foam

may be coming out of

the detergent drawer.

–Too much detergent used? Mix 1 tablespoon of fabric softener with

½ litre of water and pour into dispenser II (not for outdoor and

down-filled textiles!).

– Reduce the detergent dosage for the next wash cycle.

ʑIntense noise

formation, vibrations

and “wandering”

during the spin cycle.

– Are the appliance feet fixed? Secure the appliance feet

aInstallation instructions.

– Transportation safety devices removed? Remove the transportation

safety devices .aInstallation instructions

ʑNoises during spin and

drain cycles.

– Clean detergent-solution pump apage 10

ʑDisplay panel/indicator

lamps do not function

during operation.

– Power cut?

– Fuses triggered? Reset/change the fuses.

– If the fault occurs repeatedly, call the after-sales service.

ʑProgramme sequence

longer than usual.

– Not a fault - unbalanced load detection system adjusts imbalance

by repeatedly distributing the laundry.

– Not a fault - foam detection system active - adds an additional rinse

cycle.

ʑDetergent residues on

the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble

residues.

– Select centrifug. adicional (spin) or brush the laundry m (rinse)/ 

after washing.

If you cannot correct a fault yourself (switching on/off) or a repair is required:

– Turn the programme selector to and remove the mains plug from the socket.(off)

– Turn off the water supply and call the after-sales service a Installation instructions.

Instruction manual

Washing

machine

Observe the safety

instructions on

page 8.

Read these instructions and the separate installation

instructions before operating the washing machine.

Product specificaties

Merk:	Siemens
Categorie:	Wasmachine
Model:	WM10E221EP
Apparaatplaatsing:	Vrijstaand
Kleur van het product:	Wit
Deurscharnieren:	Links
Gewicht:	68000 g
Breedte:	600 mm
Diepte:	590 mm
Hoogte:	848 mm
Type lader:	Voorbelading
Snoerlengte:	1.6 m
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Resterende tijd indicatie:	Ja
Kinderslot:	Ja
Energie-efficiëntieklasse (oud):	A++
Stroomvoorziening:	50Hz, 10A, 220-240V
Energieverbruik wassen:	1.05 kWu
Waterconsumptie per cyclus:	47 l
Wasklasse:	A
Jaarlijkse energieverbruik wassen:	210 kWu
Centrifuge-droger klasse:	C
Sopschuimbewaking:	Ja
Onbalanscontrolesysteem:	Ja
Aanpasbare centrifugesnelheid:	Ja
Maximale centrifugesnelheid:	1000 RPM
Jaarlijks waterverbruik wassen:	9400 l
Cyclustijd (max):	188 min
AquaStop-functie:	Ja
Spoelen Plus functie:	Nee
Nominale capaciteit:	7 kg
Stroomverbruik (typisch):	2300 W
Type beeldscherm:	LED
Wasprogramma's:	Hygiene/anti-allergy, Black